Edimax EU-4206 Manuale utente

-L

Če

ký

ý: Anglického průvodce rychlou instalací naleznete na přiloženém

CD s ovladači

: Finden Sie bitte das englische QIG beiliegend in der Treiber

CD (German)

añ

ño

l: Incluido en el CD el QIG en Ingles.

nç

ça

:Veuillez trouver l’anglais QIG ci-joint dans le CD driver

: Incluso nel CD il QIG in Inglese.

Az angol telepítési útmutató megtalálható a mellékelt CD-n

s: De engelstalige QIG treft u aan op de bijgesloten CD

i: Skrócona instrukcja instalacji w języku angielskim znajduje się

na załączonej płycie CD

uê

ês

s: Incluído no CD o QIG em inglês.

Ру

ус

сс

ск

ки

ий

й:

Найдите QIG на анлийском языке на приложеном CD

Tü

ür

kç

çe

:Ürün ile beraber gelen CD içinde Türkçe HızlıKurulum

Kılavuzu'nu bulabilirsiniz

publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or

translated into any language or computer language, in any form or by any means,

electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the

prior written permission of this company.

This company makes no representations or warranties, either expressed or implied,

with respect to the contents hereof and specifically disclaims any warranties,

merchantability or fitness for any particular purpose. Any software described in this

manual is sold or licensed "as is". Should the programs prove defective following their

purchase, the buyer (and not this company, its distributor, or its dealer) assumes the

entire cost of all necessary servicing, repair, and any incidental or consequential

damages resulting from any defect in the software. Further, this company reserves the

right to revise this publication and to make changes from time to time in the contents

hereof without obligation to notify any person of such revision or changes.

The product you have purchased and the setup screen may appear slightly different

from those shown in this QIG. For more detailed information about this product, please

refer to the User's Manual on the CD-ROM. The software and specifications are subject

to change without notice. Please visit our web site www.edimax.com for the update. All

right reserved including all brand and product names mentioned in this manual are

trademarks and/or registered trademarks of their respective holders.

Contents

English ......................................................................................................... 4

Če

ký

ý ........................................................................................................... 8

h...................................................................................................... 12

añ

ño

l ...................................................................................................... 16

nç

ça

s ..................................................................................................... 20

o........................................................................................................ 24

r ....................................................................................................... 28

s ................................................................................................ 32

i ......................................................................................................... 36

uê

ês

s .................................................................................................. 40

Ру

ус

сс

ск

ки

ий

й..................................................................................................... 44

Tü

ür

kç

çe

e ........................................................................................................ 49

English

Introduction

Thank you for purchasing the USB2.0 10/100Mbps to Fast Ethernet Adapter. This

unique cable adapter allows you to connect your computer into Internet in the fast and

easy way.

Specifications

Standards

zIEEE 802.3 10Base-T and 802.3u 100Base-TX Compliant

zUSB specification 1.0 /1.1 and 2.0 compliant

Connection Mode

zFull or Half duplex for both 10Mbps and 100Mbps

Media Supported

zCategory-3, 4, 5 for 10Base-T and Category 5 for 100Base-TX

LEDs

zLink/Active LED indicator

Feature

zUSB specification revision 1.0/1.1 and 2.0 full speed compliant

zComplies with IEEE 802.3 10Based-T and 802.3u 100Base-TX

zUSB interface to desktop/notebook PC without power adapter

zRJ-45 connector to 10Mbps or 100Mbps Ethernet networks 10/100Mbps Auto-Sense

zFull/Half Duplex auto-negotiation for both 10Base-T and 100Base-TX

zCompatible with Windows 98SE / ME / 2000 / XP

Device Installation Guide

Follow the steps below on installing the USB2.0 10/100 Fast Ethernet adapter cable:

Step1.

Please connect the male B-connector of 1.5M USB2.0 cable to the female USB

B-connector of USB2.0 Fast Ethernet Adapter and RJ-45 connector of networking cable

to another end of USB2.0 Fast Ethernet Adapter.

Step2.

Connect the male A-connector of 1.5M USB2.0 cable to an available USB2.0 port on

the computer or an available USB2.0 port on the USB2.0 HUB plugged into the

computer.

Step1. Power on the computer. “New Hard Ware Found” window comes up to request

you to insert the driver diskette, and click “OK”.

Step2. Select “Search the proper files of driver”, and click “Next”.

Step3. Insert the driver disc into the computer. Select “CD-ROM Devices” or “specify a

Location” link D:\Driver\EU-4206, and click “Next”.

Step4. The driver will be found, and click “Next” to proceed.

Step5. The system will ask windows 98SE original disk.

Step6. Please insert the disk, and the system will install driver automatically.

Step7. Click “Finished” completing installation.

Step8. Windows 98SE / Me will find the driver and automatically configure the USB

Fast Ethernet Adapter.

Step9. Reboot the computer and remove the driver disc. The driver will take effect.

Step10. Check if the device is complete install in your computer“ My Computer →

(right key on the mouse) content →Hardware →Device Manager.

Step1. Power on the computer. When the “New Hardware Found Wizard” window

comes up, click “Next” to install the driver.

Step2. Select “Search the proper files of driver”, and click “Next”.

Step3. Insert the driver disc into the computer. Select “CD-ROM Devices” or “specify a

Location” link D:\Driver/EU-4206, and click “Next”.

Step4. The driver will be found, and click “Next” to proceed.

Step5. Click “Finished” to complete installation.

Step6. Windows 2000 will automatically configure the USB Fast Ethernet Adapter.

Step7. Reboot the computer and remove the driver disc. The driver will take effect.

Step8. Check if the device is complete install in your computer “ My Computer →(right

key on the mouse) content →Hardware →Device Manager.

Step1. Power on the computer. When the “New Hardware Found Wizard” windows

comes up, select “install from a list or a specific location (Advanced)”, and click “Next”.

Step2. Insert the driver disc into the computer. Select “CD-ROM Devices” or “specify a

Location” link D:\Driver/EU-4206, and click “Next”.

Step3. Windows XP will find the driver and request to continue installing and copying

needed files”.

Step4. Click “Finished” to complete the installation.

Step5. A dialogue box will appear above the taskbar showing “New network device

installed”.

Step6. Reboot the computer and remove the driver disc. The driver will take effect.

Step7. Check if the device is complete install in your computer“ Star →My Computer

→(right key on the mouse) content →Hardware →Device Manager

Če

ký

Úvod

Děkujeme za zakoupení adaptéru USB 2.0 10/100 Mbps Fast Ethernet, jedinečného

převodního zařízení, umožňujícího rychlé a jednoduché připojení počítače k internetu.

Charakteristika

Standardy

zZařízení vyhovuje standardům IEEE 802.3 10Base-T a 802.3u 100Base-TX

zZařízení je kompatibilní s USB 1.0 /1.1 a USB 2.0 specifikací

Způsob připojení

zPlný duplex nebo half duplex jak v případěrychlosti 10Mbps, tak i 100Mbps

Používané nosiče

zKroucená dvojlinka kategorie 3, 4, 5 pro 10Base-T a kroucená dvojlinka kategorie 5

pro 100Base-TX

Diody

zDioda informující o navázání spojení a aktivitězařízení

Vlastnosti

zKompatibilní se standardy USB 1.0/1.1 a 2.0

zKompatibilní se standardy IEEE 802.3 10Based-T a 802.3u 100Base-TX

zRozhraní USB umožňující připojení stolního počítače /notebooka bez napájení

zZásuvka RJ-45 umožňující připojení k síti Ethernet 10Mbps nebo 100Mbps s funkcí

autodetekce rychlosti sítě10/100Mbps

zFunkce autonegotiation v přenosovém módu Full/Half Duplex jak v případě

10Base-T, tak i 100Base-TX

zPodporované operační systémy Windows 98SE / ME / 2000 / XP

Způsob instalace zařízení

Pro instalaci převodního adaptéru USB 2.0 Fast Ethernet je třeba postupovat shodněs

níže uvedeným návodem:

Krok 1.

Zapojit male konektor spojky B jeden a půl metrového kabelu USB 2.0 do female zdířky

B portu USB 2.0 Fast Ethernet Adaptéru, a konektor RJ-45 síťového kabelu z druhé

strany adaptéru USB2.0 Fast Ethernet.

Krok 2.

Zapojit male konektor A jeden a půl metrového kabelu USB 2.0 do volného portu USB

2.0 v počítači nebo sběrnici USB 2.0 připojené k počítači.

ač

če

ač

čn

ní

ím

té

ém

Krok 1. Zapnout počítač. Objeví se okénko s informací “Nalezeno nové zařízení” a

požadavkem vložit do mechaniky CD s ovladačem a stisknout tlačítko “OK”.

Krok 2. Zaškrtnout pole “Vyhledat soubor ovladače pro zařízení” a pokračovat stiskem

“Další”.

Krok 3. Vložit CD s ovladači do mechaniky CD-ROM. Zaškrtnout pole “Jednotka

CD-ROM” nebo “Jiné umístění”, označit D:\Driver\EU-4206 a pokračovat stiskem

“Další”.

Krok 4. Po nalezení ovladače kliknout “Další” a pokračovat v instalaci.

Krok 5. Systém požádá o originální instalační CD systému Windows 98SE.

Krok . Vložit CD. Systém automaticky nainstaluje ovladač.

Krok 7. Kliknout “Dokončit” pro završení instalace.

Krok 8. Systém Windows 98SE / Me nalezne ovladača automaticky zkonfiguruje

adaptér USB Fast Ethernet.

Krok 9. Restartovat počítača vyndat CD s ovladači z mechaniky. Ovladačbude

fungovat.

Krok 10. Zkontrolovat, zda bylo zařízení správněnainstalováno do systému “Můj

počítač→(kliknout pravým tlačítkem myši) Vlastnosti →Hardware →Správce

zařízení.

Altri manuali per EU-4206

Indice

Lingue:

Altri manuali Edimax Adattatore

Edimax

Edimax EW-7618Ug Manuale utente

Edimax

Edimax EW-7722UnD Manuale utente

Edimax

Edimax HP-5102 Manuale utente

Edimax

Edimax EW-7608Pg Manuale utente

Edimax

Edimax nMAX Manuale utente

Edimax

Edimax HP-5102 Manuale utente

Edimax

Edimax Access Point Guida utente

Edimax

Edimax EW-7106PC Manuale utente

Edimax

Edimax Wireless USB Adapter 11g & 11n Manuale utente

Edimax

Edimax EW-7612U Manuale utente

Edimax

Edimax HP-5102K Manuale utente

Edimax

Edimax EN-9120 Manuale utente

Edimax

Edimax EW-7318USg Manuale utente

Edimax

Edimax EW-7708Pn Manuale utente

Edimax

Edimax EW-7612UAN Manuale utente

Edimax

Edimax EW-7722UTn V2 Manuale di istruzioni

Edimax

Edimax EW-7608Pg Manuale utente

Edimax

Edimax HP-5101AC Manuale utente

Edimax

Edimax EW-7722PnD Manuale utente

Edimax

Edimax HP-5101AC Manuale utente

Edimax

Edimax EW-7722UnD Manuale utente

Edimax

Edimax EW-7722UnD Manuale utente

Edimax

Edimax EW-7811UTC Manuale utente

Edimax

Edimax pmn802.11b/g WLAN USB adapter with Wi-Fi... Manuale utente

Manuali Adattatore popolari di altre marche

PCB Piezotronics

PCB Piezotronics 090B274 Manuale utente

Auvidea

Auvidea J20 Manuale del prodotto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manuale utente

Akribis

Akribis ITF-21-BISS-MIT Manuale utente

Tenda

Tenda W54U Manuale utente

ROHO

ROHO AGILITY Manuale utente

PROLiNK

PROLiNK WN2001 Manuale utente

Hawking

Hawking HUF2 Manuale utente

Airlink101

Airlink101 AWLC4030 Manuale utente

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manuale utente

Philips

Philips SWA4554S/10 Manuale utente

JVC

JVC TS-C9D2B Manuale di istruzioni

NETGEAR

NETGEAR A6100 Manuale utente

D-Link

D-Link DWA-121 Manuale utente

Philips

Philips SWA2037 Manuale utente

Basalte

Basalte 0610-20 Manuale utente

Yealink

Yealink EHS40 Manuale utente

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manuale utente