EKSA E1 Manuale utente
E1
USER MANUAL
Thank you for choosing EKSA E1. Please follow all sides of this user guide to ensure proper use and
keep it for future reference.
Specifications
Transmission
Frequency:
Charging Current :
BT Music Current：
BT Call Working
Current : 19~20mA
17~20mA
210mA
2402-2480MHz
Modol No :
Power Voltage :
Charging Voltage :
BT Version :
Talk Time：
Speaker : 40mm/32Ω±15%
Sound Pressure level
(Sensitivity) : 105+/-3dB at 1kHz
BT Music PlayTime : Up to 24 hours
Wireless Range：
Weight :
10meter/33feet
220g
Mic Sensitivity -42dB±3
Battery in
headphones : 450mAh polymer
battery
Up to 20 hours
5.0
5V
3V-4.2V
E1
1
1 * EKSA Bluetooth Stereo Headphones (E1)
1 * Micro USB Charging Cable
1 * 3.5mm Audio Cable
1 * Carry Bag
1 * User Guide
Package Contents
Product Overview
LED indicator—Bluetooth, Charging, Power on
Micro-USB input
3.5mm audio input
Microphone
Short press
Long press
Volume down/
Previous track
Short press
Long press
Volume up/
Next track
On/Off
Play Pause
Call/Answer/Hang up
3.5mm audio cable
8
1
2
3
4
5
9
7
6
Super EQ/Voice Assitant
Multifunction
button
2
You can charge the headphones regardless of their power state (on or off).
1. Connect the micro-USB plug of the charging cable to the micro-USB input of the headphones.
2. Connect the USB plug to the USB port of your computer. If you are using an external power
adapter, connect the USB plug to the power adapter or to the USB car charger adapter, and
connect to the power source.
Ensure that the headphones are within 1m range of your smartphone and that Bluetooth is activated
on the headphones when performing this procedure.
1.Switch the headphones on, press the Multifunction button for 3 seconds or until you hear the voice
prompt “pairing”. The LED light flashes red and blue alternately. The headphones are in pairing
mode.
When being charged, the LED indicator lights up as Red constantly and will turn into Blue when fully
charged. When the battery drops to a low level, a “beep” tone will be heard prompting you to
recharge the headphones.
It is recommended to charge the headphones using only the supplied USB cable. You can’t continue
playing music or making calls on your smartphone while the headphones are being charged.
Getting started
Charging the headphones
Pairing the headphones with a Bluetooth device
A complete charging cycle takes about 3 hours. Before using the headphones for the first time, charge
the headphones for a complete charging cycle without interruption.
3
1. Connect headphones with the first device as above. Then turn off the Bluetooth on the connected
device.
2. Connect headphones with the second device as above.
3. Turn on the Bluetooth on the first device. Tap and select "EKSA E1" to connect them.
4. Now the headphones should be connected with both devices simutaneously.
Connect with two Bluetooth devices simultaneously
Adjusting the headband
NOTE: EKSA E1 only has one audio channel, if you want to play music from another Bluetooth
device, please pause the current device's music first.
For good sound quality and best possible wearing comfort, you can adjust the ear pad location on
the headband to properly match the size of your head.
Wear the headphones so that the headband runs over the top of your head.
Adjust the location of the ear pads by moving the cups up and down of the headband slider until:
—your ears are comfortably covered by the ear pads.
—you feel even, gentle pressure around your ears.
—a sung fit of the headband in the head is ensured.
4. From the list of found Bluetooth devices, select “EKSA E1”. If necessary, enter the default PIN
code “0000”.
If pairing was successful, you hear the voice prompt “connected”. The LED will flash blue occasionally.
2. Activate Bluetooth on your smartphone.
3. On your smartphone, start a search for Bluetooth devices. All active Bluetooth devices in the
proximity of your smartphone are displayed.
4
Playing music using the audio cable
Switching the headphones on
Playing music wirelessly
Switching the headphones off
Use the audio cable to listen to music when the headphones are running out of battery or when
Bluetooth transmission is restricted or not allowed.
Using the headphones
Press the multifunction button for 3 seconds. You hear the voice prompts “ power on” and the LED
flashes between blue and red when the headphones are active.
The following music functions are only available when the headphones and your device are
connected via Bluetooth. Some smartphones, music apps or players may not support all functions.
Press the multifunction button for 3 seconds. You hear the voice prompt “power off” and the LED
light turns off, indicating the headphones are off.
Adjusting the volume
Press the volume +/- buttons once to increase or decrease the volume. When the maximum or
minimum volume is reached, you hear an alert tone.
The headphones immediately switch off once the audio cable is plugged into the audio input.
Playing/pausing music: quickly press the multifunction button.
Playing the next/previous track: press and hold the volume+/- button
5
1. Insert the 3.5mm jack plug into the audio input of the headphones. Bluetooth is deactivated.
2. Connect the 3.5mm jack plug to the audio output of your smartphone.
Inserting the audio cable
Super EQ Technology
Making calls on the headphones
Press the SuperEQ button and hold for 3 seconds to activate the bass boost mode transforming your
audio into an immersive experience with powerful bass you can feel.
1. Making a call: Dial the desired number on your smartphone.
If your smartphone does not automatically transfer the call to the headphones, select the
EKSA E1 as the audio source on your smartphone (see the instruction manual of your smartphone
if necessary).
2. Accepting/rejecting/ending a call: Press the multifunction button once to accept and end
the call, press and hold the multifunction button to reject an incoming call.
3. Redialing: You can use this function when the headphones are not actively playing music or are used
for making calls.
Press quickly the multifunction button twice to redial the last number called and press the
multifunction button once to cancel the redialing.
During the call, you can adjust the volume by pressing the volume+ or volume– button
on the headphones.
6
Clearing the previously paired devices
4
You can use this function when the headphones are not actively playing music or are used for making
calls.
1. Press the Voice assistant/Super EQ button once to active Siri or Google assistant.
2. Say your voice command, such as “Call Jack”.The Bluetooth smartphone dials the phone number of
Jack.
The LED flashes between red and blue. The headphones are permanently disconnected from all
devices and immediately go into pairing mod.The Bluetooth mode switch off once the audio cable is
plugged into the audio input.
1. Set the headphones to pairing mode.
2. Simultaneously press the volume+ button and volume – button for 4 seconds.
AccessingVoice assistant
7
Forced pairing mode: Press and hold multifunction for 5 seconds to enter the forced pairing mode
directly when E1 is unable to enter pairing mode.
What is not Covered
How to Make a Claim
This warranty does not cover defects resulting from improper or unreasonable use or maintenance;
failure to follow operating instructions; accidents; excess moistures; insects; lightning; unautho-rized
alteration or modification of original condition; damage caused by inadequate packing or shipping
procedures; loss of, damage to or corruption of stored data; damage caused by use with non-EKSA
products; the product that requires modification or adaptation to enable it to operate in any country
other than the country for which it was designed, manufactured, approved and/or authorized, or repair of
products damaged by their modifications; and products purchase from unauthorized dealers.
Please sign up for EKSA warranty service at www.eksa.net. EKSA warrants that this product, for 2 years
from the date of retail purchased by the original end-user. And it is delivered from EKSA authorized
reseller, in original package, in new condition and is free from any defects in manufacturing and
workmanship. We will repair or replace (using new or refurbished replacement product) any defective
product within a reasonable period and free of charge.
Limited Warranty
product defect (or should have discovered it, if such product defect was obvious);
In order to get professional solutions from EKSA, please give a detailed explanation of how the
damage occurred.
8
In the event damage has occurred to products, you must
follow these instructions:
Other Legal rights
This limited warranty gives you specific legal rights, and you also may have other rights that vary from
state to state or country to country. Some places do not allow limitations on implied warranties or the
exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions
may not apply to you.Thank you for choosing EKSA. We hope you enjoy our product.Do you like the
purchase experience in our store? We d appreciate it if you can share your fair product review and
feedback. If you are not completely satisfied, please reply to [email protected] or you can contact us via
HongKong Customer Center: +852 6940 4955 (Mon to Fri 9:00 am- 6:30 pm, UTC+8 HKT)
India Customer Center: +91 84319 76061 (Mon to Sat IST 9:30 am-6:00 pm) so that we may a
ddress your concerns before you leave a product review.
Return the products. EKSA will, at our sole option, repair or replace (using new or refurbished
replacement parts) any defective parts within a reasonable period of time and free of charge.
parts) any defective parts within a reasonable period of time and free of charge.
9
Email us at [email protected] with faulty products. Please attach the video and the description of the
product.We could solve the problem with more details timely.Those who email with videos and
detailed descriptions will be awarded with 1 gift products.
Note
If you can’t connect the headset/headphones to your devices, please ask us for complete FAQ
guidance. You can find the solution finally.
Depending on your head/ear size/shape, it may be a little tight (feels like“on ear") for someone to
wear which is designed to avoid sound leakage. In case of that and to get both audio and wearing
comfort, please take off the headphone every 1~2 hours to get your ears relaxed and protect them
from the muggy environment in use.
Please follow us on Facebook @EKSA Global,Twitter, Instagram, and YouTube @EKSAtech for new
product release and promotion info.
Indice
Lingue:
Altri manuali EKSA Cuffia
EKSA
EKSA Telecom H16 Manuale utente
EKSA
EKSA H1-BT Manuale utente
EKSA
EKSA STAR ENGINE Pro Manuale utente
EKSA
EKSA H1 Plus Manuale utente
EKSA
EKSA E3000 Manuale utente
EKSA
EKSA E900 Plus Manuale utente
EKSA
EKSA H6 Manuale utente
EKSA
EKSA H12E Manuale utente
EKSA
EKSA E1000WT Manuale utente
EKSA
EKSA E910 Manuale utente
EKSA
EKSA Easy E900 Istruzioni per il montaggio
EKSA
EKSA E800 Istruzioni per il montaggio
EKSA
EKSA Easy E900 Manuale utente
EKSA
EKSA E910 Manuale utente
EKSA
EKSA Air Joy Manuale di riferimento
EKSA
EKSA E1000 Guida all'installazione
EKSA
EKSA Easy E900 Istruzioni per il montaggio
EKSA
EKSA Air Joy Plus Istruzioni per il montaggio
EKSA
EKSA H6 Manuale utente
EKSA
EKSA Air Joy Pro Istruzioni per il montaggio
