Ekwb Velocity - Intel Manuale utente

Velocity CPU WATER BLOCK USER MANUAL - 3rd Revision, July 27th 2021

Velocity – Intel

CPU WATER BLOCK

This product is intended for installation only by expert users. Please

consult with a qualiﬁed technician for installation. Improper installation may

result in damage to your equipment. EK Water Blocks assumes no liability

whatsoever, expressed or implied, for the use of these products, nor their

installation. The following instructions are subject to change without

notice. Please visit our website at www.ekwb.com for updates. Before

installation of this product, please read important notice, disclosure, and

warranty conditions that are printed on the back of the box.

Before you start using this product, please follow these basic guidelines:

Please carefully read the manual before beginning the installation

process.

Please remove your graphics card from the computer to assure the

safest mounting process and prevent any possible damage to your

GPU and/or graphics card circuit board (PCB).

The EK Fittings require only a small amount of force to screw

them ﬁrmly in place since the liquid seal is ensured by the rubber

O-ring gaskets.

The use of corrosion inhibiting coolants is always recommended

for liquid cooling systems, and mandatory for nickel plated

water blocks!

Do not use pure distilled water! For best results EK rrecommends

the use of EK-CryoFuel coolants.

Make sure to thoroughly bleed air out of your water block, or you will

not reach optimal performance.

QUICK INSTALLATION GUIDE

- 3 -

REPLACING THE JET PLATE PROCEDURE 10

INSTALLING THE WATER BLOCK 11

LGA20113 / 2066 SOCKET MOTHERBOARDS 11

LGA115XSOCKET MOTHERBOARDS 13

CONNECTING THE RGB LED STRIP (Optional) 14

CONNECTING THE RGB LED STRIP 15

CONNECTING THE DRGB LED STRIP 15

TABLE OF CONTENT

GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY 4

BOX CONTENTS 5

WATER BLOCK DIMENSIONS 6

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS 7

SUPPORT AND SERVICE 17

SOCIAL MEDIA 17

- 4 -

GENERAL INFORMATION ON WATER BLOCK COMPATIBILITY

This CPU liquid cooling unit is pre-assembled for use with modern Intel

desktop socket type motherboards. By default (out of the box) this water

block supports the following CPU sockets:

- Intel LGA-1150/1151/1155/1156

- Intel LGA-1200

- Intel LGA-2011(-3)

- Intel LGA-2066

- 5 -

Washer (5 pcs)

Spring (4 pcs) Standoff - LGA 115x / AMD (4 pcs)

BOX CONTENTS

Standoff - 20xx (4 pcs)EK-Velocity universal CPU water block with the Intel bracket (1 pc)

Allen Key 2.5 mm (1 pc)

Thumb Nut (4 pcs)

Metal Backplate LGA-115x / LGA-1200 (1 pc)

Additional Jet Plate – 0.8 mm (1 pc)

Backplate Rubber Gasket (1 pc)

Thermal grease (1 pc)

Universal Mounting Mechanism – You may not need every

screw from this package. EAN: 3831109813065

EAN: 3831109828618

- 6 -

WATER BLOCK DIMENSIONS

90.7 mm

68.3 mm

22 mm

- 7 -

TECHNICAL SPECIFICATIONS AND WATER BLOCK PARTS

Technical Speciﬁcation:

- Dimensions (L x H x W): 91 x 91 x 22 mm

- D-RGB cable length: 500 mm

- D-RGB LED count: 20

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

1100668 COLDPLATE - Copper 1

100669 COLDPLATE - Nickel

100830 VELOCITY FRAME - Black

1100831 VELOCITY FRAME - Nickel

100832 VELOCITY FRAME - White

38207 SCREW M4x14 DIN7991 4

4100663 EK-BADGE 1

5100849 Intel Mounting Plate + LED D-RGB 1

100526 TOP PLATE - Acetal

1100525 TOP PLATE - Plexi

1012044 TOP PLATE - Frosted Plexi

7100629 J ET PL ATE 1

8100728 SEALING GASKET 1

LED light is not included in all versions.

- 8 -

Technical Speciﬁcation:

- Dimensions (L x H x W): 91 x 91 x 22 mm

- D-RGB cable length: 500 mm

- D-RGB LED count: 1

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

1100668 COLDPLATE - Copper 1

100669 COLDPLATE - Nickel

100830 VELOCITY FRAME - Black

1100831 VELOCITY FRAME - Nickel

100832 VELOCITY FRAME - White

38207 SCREW M4 x 14 DIN7991 4

4100663 EK-BADGE 1

5100575 INTEL MOUNTING PLATE 1

101691 TOP PLATE - Strike Black Nickel

1101692 TOP PLATE - Strike Matte Black

100528 TOP PLATE - Full Nickel

7100629 J ET PL ATE 1

8100728 SEALING GASKET 1

9102213 LED D-RGB PANEL 1

101693 STRIKE COVER - Black Elox

1101694 STRIKE COVER - Natural Elox

102500 HONOR COVER - Stars & Stripes

- 9 -

Technical Speciﬁcation:

- Dimensions (L x H x W): 91 x 91 x 22 mm

- D-RGB cable length: 500 mm

- D-RGB LED count: 1

- D-RGB connector standard 3-pin (+5V, Data, Blocked, Ground)

Position EAN Description Quantity

1100668 COLDPLATE - Copper 1

100669 COLDPLATE - Nickel

100830 VELOCITY FRAME - Black

1100831 VELOCITY FRAME - Nickel

100832 VELOCITY FRAME - White

38207 SCREW M4 x 14 DIN7991 4

4100663 EK-BADGE 1

5100575 INTEL MOUNTING PLATE 1

6100528 TOP PLATE - Full Nickel 1

7100629 J ET PL ATE 1

8100728 SEALING GASKET 1

9102213 LED D-RGB PANEL 1

- 10 -

REPLACING THE JET PLATE PROCEDURE

STEP 1

Please reference the table below to determine the optimal insert and

jet plate needed for your type of socket.

Socket Optimal Jet

LGA-115x / LGA-1200 J1

LGA-2011(-3) J2

LGA-2066 J2

d= 1 mm

d= 0.8 mm

STEP 2

Unscrew the four M4 screws in counter-clock-wise direction from the

bottom of the water block using the enclosed 2.5 mm Allen key to release

the assembly, which consists of the water block top and jet plate. Upon

replacing the jet plate, please reassemble the water block as shown in

STEP 1 and STEP 2. Pay special attention to the insert orientation relative

to the copper base and the water block top.

Before reassembly of the water block it is crucial that the

preformed gasket (o-ring) is placed into the gap between

the mounting plate and the water block top.

Screw the four screws back in ﬁrmly, but not forcefully.

JE T PL AT E

WATER BLOCK TOP

STEP 2

Indice

Altri manuali ekwb Hardware per computer

ekwb

ekwb EK-FC1080 GTX FTW2 Manuale utente

ekwb

ekwb EK-Quantum Reflection Uni 140 D5 PWM D-RGB Manuale utente

ekwb

ekwb EK-Nucleus AIO CR360 Vision D-RGB Manuale utente

ekwb

ekwb EK-FC970 GTX TF5 Manuale

ekwb

ekwb Barebones Guida

ekwb

ekwb EK-FB ASUS CROSSHAIR 3 Manuale

ekwb

ekwb EK-PRO GPU WB RTX 6000 ADA Nickel Inox Manuale utente

ekwb

ekwb EK-FCQ6000 Manuale

ekwb

ekwb EK-Momentum MSI Z390 MEG GODLIKE Manuale utente

ekwb

ekwb EK-FC590 GTX Guida

ekwb

ekwb EK-FCW8100 Guida

ekwb

ekwb EK-Quantum Vector RE RTX 3080 Active Backplate... Manuale utente

ekwb

ekwb EK-FC980 GTX Ti WF3 Manuale

ekwb

ekwb EK-FB KIT GA-X99 SOC Champion Series Manuale

ekwb

ekwb EK-FC1080 GTX FTW Manuale utente

ekwb

ekwb EK-FC1080 GTX G1 Manuale utente

ekwb

ekwb EK-FC R9 290X DCII Guida

ekwb

ekwb EK-FC980 Manuale

ekwb

ekwb EK-AIO 120 D-RGB Manuale utente

ekwb

ekwb EK-QuantumX Loophole Distroplate D5 PWM Manuale utente

ekwb

ekwb EK-FC Fury X Manuale

ekwb

ekwb EK-Pro AM5 Series Manuale utente

ekwb

ekwb EK-KIT HT Series Manuale utente

ekwb

ekwb EK-FC Strix RTX 2080 Ti Backplate Classic Manuale utente

Manuali Hardware per computer popolari di altre marche

EMC2

EMC2 VNX Series Manuale del proprietario

Panasonic

Panasonic DV0PM20105 Manuale utente

Mitsubishi Electric

Mitsubishi Electric Q81BD-J61BT11 Manuale utente

Gigabyte

Gigabyte B660M DS3H AX DDR4 Manuale utente

Raidon

Raidon iT2300 Manuale utente

National Instruments

National Instruments PXI-8186 Manuale utente

Hauppauge

Hauppauge WinTV-HVR-2250 Manuale utente

Kontron

Kontron CP6002 Manuale utente

Manhattan

Manhattan 702843 Manuale utente

Aphex

Aphex 230 Manuale utente

AMD

AMD Phenom II Manuale operativo

Intel

Intel NUC 12 Pro Manuale utente

dbx

dbx Zone Pro 1260 Manuale utente

Galaxy

Galaxy GHDX2-2430S-24F4D Manuale utente

Intel

Intel AXXRMFBU4 Manuale utente

Kontron

Kontron DIMM-PC/MD Manuale utente

ST X-NUCLEO-SAFEA1B Istruzioni operative

STEINWAY LYNGDORF

STEINWAY LYNGDORF SP-1 Manuale utente

ekwb Velocity - Intel Manuale utente

Manuali Hardware per computer popolari di altre marche