Eldes EPIR2 Foglio di istruzioni

GSM ALARM SYSTEM

EPIR2

CONFIGURATION MANUAL

Contents

1. General Information ..............................................................................................................................................................................5

1.1 Protecting your home and property with the EPIR2 alarm system..............................................................................................................................5

1.2 Compatible Device Overview ...................................................................................................................................................................................................5

1.3 Default Parameters & Ways of Parameter Conguration.................................................................................................................................................5

2. Technical Specications .........................................................................................................................................................7

2.1 Electrical & Mechanical Characteristics .................................................................................................................................................................................7

2.2 Main Unit Functionality ..............................................................................................................................................................................................................8

3. Installation ..............................................................................................................................................................................8

4. Conguration & Control .........................................................................................................................................................9

4.1 Primary System Conguration .................................................................................................................................................................................................9

4.2 Ways of System Conguration...................................................................................................................................................................................................9

4.3 Remote System Conguration via GPRS Connection ....................................................................................................................................................10

4.3.1 Establishing Remote Connection Between EPIR2 System and Conguration Server ...........................................................................10

4.3.2 Connecting to ELDES Conguration Server using ELDES Conguration Tool Software .......................................................................11

4.3.3 Ending the Conguration Process ............................................................................................................................................................................11

4.4 Parameter Conguration Set (SMS, EKB3W).......................................................................................................................................................................12

4.4.1 SMS Language .................................................................................................................................................................................................................12

4.4.2 Passwords...........................................................................................................................................................................................................................13

4.4.3 User & Security Guard Phone Numbers...................................................................................................................................................................14

4.4.4 Date & Time .......................................................................................................................................................................................................................15

4.4.5 Zones ...................................................................................................................................................................................................................................16

4.4.6 Wireless PGM Outputs ..................................................................................................................................................................................................21

4.4.7 Alarm & Siren.....................................................................................................................................................................................................................23

4.4.8 Info SMS ..............................................................................................................................................................................................................................25

4.4.9 Alarm Notications .........................................................................................................................................................................................................26

4.4.10 Arm/Disarm Notications ...........................................................................................................................................................................................29

4.4.11 Main Power Supply & Backup Battery Status Notications .............................................................................................................................31

4.4.12 SMS Message Delivery Report....................................................................................................................................................................................32

4.4.13 Remote Listening ............................................................................................................................................................................................................32

4.4.14 System Control from Any Phone Number..............................................................................................................................................................33

4.4.15 Additional Parameters...................................................................................................................................................................................................33

5. ELDES Wireless Devices ....................................................................................................................................................... 36

6. Technical Support ................................................................................................................................................................ 39

6.1 Fault Messages..............................................................................................................................................................................................................................39

6.2 Frequently Asked Questions ...................................................................................................................................................................................................40

6.3 Troubleshooting...........................................................................................................................................................................................................................41

6.4 Restoring Conguration to Default.......................................................................................................................................................................................41

6.5 Upgrading the Firmware using USB Cable .........................................................................................................................................................................41

6.6 Upgrading the Firmware via GPRS Connection (FOTA) ................................................................................................................................................41

7. Monitoring Station............................................................................................................................................................... 42

7.1 Data Messages – Events.............................................................................................................................................................................................................43

7.2 Communication............................................................................................................................................................................................................................45

7.3 GPRS Network ...............................................................................................................................................................................................................................48

7.4 Voice Calls and SMS.....................................................................................................................................................................................................................51

MANUAL ELDES EPIR2 INSTALLATION MANUAL V1.3

Conguration Manual v1.3

SAFETY INSTRUCTIONS

for the EPIR22 alarm system

(later referred to as‘the EPIR2’, ‘the system’, ‘the device’‘the unit’ or ‘the detector’)

Please read and follow these safety guidelines to safeguard yourself and others:

• DO NOT use the system where it can interfere with other devices - such as medical devices

• The alarm system radio transceiver operates in the GSM850, GSM900, GSM1800 and GSM1900 bands

• DO NOT use the system in hazardous environments

• DO NOT expose the system to high humidity, chemical environments or mechanical impact

• DO NOT attempt to repair the system yourself - any repairs must be carried out by fully qualied personnel only

The EPIR2 comes with its own power supply unit so you can plug it in straight away. The unit is not meant for outdoor

use, i.e. you should use it inside a building and the power supply must be plugged into a standard Euro 2-pin socket or

UK 3-pin socket (depending on the version you have bought). The main circuit should be protected by short circuit or

over-current protection.

Please use the power supply unit which comes with your EPIR2, as it meets the EN 60950-1 standard. Any additional de-

vice you connect to the system, such as a computer, must also be powered by an EN 60950-1 approved supply.

Any additional devices linked to the system EPIR2 (computer, sensors, relays etc.) must be approved by LST EN 60950-1

standard.

Disconnect the mains power before installing. Never install or carry out maintenance during stormy weather. The electric socket

that powers the system must be easily accessible. In case of power cut, the system is powered by a back-up battery.

WARNING: Only use the approved back-up battery with the system to avoid re or explosion. Take care when connect-

ing positive and negative battery terminals.

To switch the system o, unplug the external electric power supply and disconnect the battery by rst removing the front

cover of the device. A blown fuse cannot be replaced by the user. The replacement fuse has to be of the kind indicated by

the manufacturer (fuse F1 type – C1S 2.5A).

If you use a computer to select your ideal settings, it must be earthed.

The WEEE (Waste Electrical and Electronic Equipment) symbol on this product (see left) means it must not be disposed

of in household waste. To prevent possible harm to human health and/or the environment, you must dispose of this

product in an approved and environmentally safe recycling facility. For further information contact your system sup-

plier, or your local waste authority.

Limited Liability

The buyer agrees that the system will reduce the risk of re, theft, burglary or other danger but that it does not guarantee against the

occurrence of such events.

ELDES UAB will not take any responsibility for the loss of personal eects, property or revenue whilst using the system. The liability of

ELDES UAB is limited to the value of the system purchased.

ELDES UAB is not aliated with any mobile/wireless/cellular provider and is therefore not responsible for the quality of such services.

Manufacturer Warranty

The system carries a 24-month manufacturer warranty from ELDES UAB.

The warranty begins the day the system is purchased by the user and the receipt must be retained as proof of purchase date. The

warranty remains valid only if the system is used as intended, following all guidelines outlined in this manual and in accordance with

the operating conditions specied.

The warranty is void if the system has been exposed to mechanical impact, chemicals, high humidity, uids, corrosive and hazardous

environments or force majeure factors.

Package Content

EPIR2 alarm system .................................................. 1

Power supply ................................................................1

User manual ..................................................................1

MiniUSB cable ..............................................................1

Back-up battery ...........................................................1

Screws .............................................................................1

5,6kΩ resistor.................................................................1

Not included: You will need to supply your own SIM card – we recommend you get a contract SIM, not Pay As You Go.

Dear Customer,

Thank you for choosing to purchase the EPIR2 alarm system to protect your property.Your thoughtful decision will ensure reliable

protection for many years as all ELDES products are manufactured to meet the highest standards.

We are condent that you will be completely satised with your product. However, in the unlikely event that you do experience a

problem, please contact the dealer from whom you made your purchase.

It is forbidden to copy and distribute information in this document without advance written authorisation from ELDES UAB. We reserve

the right to update or modify this document and/ or related products without warning. The EPIR2 GSM Alarm System complies with the

essential requirements and relevant provisions of Directive 1999/5/EC. The declaration of conformity may be viewed at www.eldes.lt

MANUAL ELDES EPIR2 INSTALLATION MANUAL V1.3

1. General Information

1.1 Protecting your home and property with the EPIR2 alarm system

Where and how to use the alarm system

The EPIR2 is a convenient, easy to use, remote control security system for houses, cottages, country homes, garages and other buildings.

It uses an internal SIM card (not supplied by ELDES) and an infra red sensor, and communicates with your mobile phone so you can:

• Protectyourpropertywhileyouareawayfromhome

• Listentowhatishappeninginyourpropertyfollowingasecurityalert

• Switchthesystemonorofromanywhereintheworldatnocost

• ReceiveSMS/textmessagesupdatingyouonthesystemstatus

• Includeuptoveuserstoreceivesystemstatusmessagesand/orsecurityalerts

1.2 Compatible Device Overview

Wireless Devices

Device Description Max. Connectable Devices

EW1* Wireless 2 zone and 2 PGM output expansion module 16*

EWP1* Wireless PIR motion detector 16*

EWD1* Wireless magnetic door contact 16*

EWK1* Wireless key-fob with 4 buttons 5*

EWS1* Wireless indoor siren 16*

EWS2* Wireless outdoor siren 16*

EKB3W* Wireless LED keyboard 4*

* - A mixed combination of wireless devices is supported. The combination can consist of up to 16 wireless devices in total.

1.3 Default Parameters & Ways of Parameter Conguration

Main Parameters

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

SMS Language Depends on rmware version according to user‘s location   

SMS Password 0000   

User Password 1 1111  

User Password 2... 10 N/A  

Admin Password 1470  

User 1... 10 Phone Number N/A   

Security Guard Phone Number N/A  

Allow Only Preset Users Enabled   

Date & Time N/A   

Zones

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

Zone Alarm Text Z1 - Alarm Zone1, Z2 - Alarm Zone2, Z3 - Alarm Zone3 etc.  

Entry Delay 15 seconds   

On-board Z1 Zone Type Follow  

Exit Delay 15 seconds   

EKB3W Zone Type Instant  

Wireless Zone Type Depends on the connected wireless device  

Virtual Zone Type Follow  

On-board Z1 Zone Status Enabled   

Zones

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

EKB3W Zone Status Disabled   

Wireless Zone Status Enabled   

Virtual Zone Status Disabled  

Stay Mode for a Specied Zone Disabled  

Tamper Name Box Tamper; Tamper 2, Tamper 3 etc. 

Wireless PGM Outputs

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

Wireless PGM Output Name C1 – Controll1, C2 – Controll2, C3 – Controll3 etc.  

Wireless PGM Output Status Enabled   

Wireless PGM Output Type Depends on the connected wireless device 

Alarm & Siren

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

Alarm Duration 1 minute   

Bell Squawk Disabled  

Activate Siren if Wireless Device is Lost Disabled  

EWS2 LED Enabled 

Periodic Info SMS, SMS Delivery Report, Alarm & Arm/Disarm Notications

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

Periodic Info SMS Period – 1; Time - 11   

SMS Delivery Report Enabled  

Call in Case of Alarm Enabled   

Send SMS in Case of Alarm Enabled   

Send Alarm SMS to User 1... 5 Enabled  

Send Alarm SMS to All Users Simultaneously Disabled   

Send Alarm SMS to Security Guard Enabled  

Send Arm/Disarm SMS to User 1... 5 Enabled  

Send Arm/Disarm SMS to

All Users Simultaneously

Disabled   

Send Arm/Disarm SMS to Security Guard Enabled  

Main Power & Battery Status Notications

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

Send SMS in Case of Main Power Loss/Restore Enabled   

Send SMS in Case of Battery Trouble Enabled  

Monitoring Station

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

MS Mode Disabled   

Data Messages All Enabled  

Account (Alarm System ID) 9999  

Monitoring Station Phone Number 1... 3 (Voice

Calls/SMS)

N/A  

Call Attempts 3  

Server IP Address (GPRS) 0.0.0.0   

DNS1 Server IP Address (GPRS) N/A   

MANUAL ELDES EPIR2 INSTALLATION MANUAL V1.3

Monitoring Station

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

DNS2 Server IP Address (GPRS) N/A   

Protocol (GPRS) TCP   

Server Port (GPRS) 20000   

Local Port (GPRS) N/A   

APN (GPRS) N/A  

User (GPRS) N/A  

Password (GPRS) N/A  

Prole Prole1  

Primary Connection GPRS Network  

Backup Connection 1... 2 N/A  

GPRS Attempts 3 

Delay after last communication attempt 600 seconds  

Device ID (Monitoring Station ID) 0000  

Test Period (GPRS) 180 seconds  

Additional Parameters

Parameter Default Value

Congurable by:

SMS EKB3W Conguration

Tool

LED Indication for Movement Detection Disabled  

PIR Detector (Motion Detector) Level 40   

Microphone Gain 12  

Speaker Level 85  

Keyboard Back-light Timeout 10 seconds 

2. Technical Specications

2.1 Electrical & Mechanical Characteristics

Supply voltage 11-15V 500mA max

Back-up battery voltage, capacity 8.4V; 250mAh

Back-up battery type Ni-Mh

GSM modem frequency 850/900/1800/1900 Mhz

Dimensions 104x60x33mm

Operating temperature range -10…+40 °C

Humidity 0-90% RH @ 0... +40 °C (non-condensing)

Back-up battery operating time up to 24 hours*

Detection angle 90°

Maximum motion detection range 10 metres

Wireless transmitter-receiver frequency 868 Mhz

Wireless communication range up to 30m in premises; up to 150m in open areas

Maximum number of wireless devices 16

Communications SMS, Voice Calls, GPRS Network

Supported protocols Ademco Contact ID, EGR100, Kronos, Cortex SMS

BELL+: siren output commuted values Current - 150mA max.; voltage - 15V (EPIR2 on external power supply) / 7V (EPIR2

on backup battery)

* - with Smart Security disabled; with wireless transmitter-receiver module disabled

2.2 Main Unit Functionality

3. Installation

The system should be installed indoors, in stationary environment. Choose the installation location where unauthorized

access is most probable:

To avoid false alarms, do not install the system in the following locations:

• locatinglenstowardsdirectsunshine,e.g.facingwindows;

• neardeviceswithhightemperatureuctuations,e.g.replaceorheatingboiler;

• areasofincreaseddustorairowtrac;

• metalorshieldedwallwhichmaycauseGSMconnection(andwirelessifany)interference.

Fig. No. 4

BACK SIDE INSIDE VIEW

BELL- / COM

BELL+

16 6 315

SIM

GSM

BATTERY

1. EPIR2 holder for xing on the wall

2. Lens for movement detector and LED

3. Power supply socket to connect to mains electricity

4. Power supply transformer

5. Power supply connection lead

6. Reset button to restore default parameters

7. Holder to x the unit in place

8. Mini-USB connector to allow programming via your PC

9. Holder for SIM card

10. GSM module

11. Back-up battery in case of mains power supply failure

12. Motion detector to sense possible intruders

13. TAMPER button to alert you if anyone interferes with the

unit

14. Microphone to allow you to listen in to an incident using

your mobile phone

15. Wired zone & output for siren or electrical appliance con-

nection

16. Built-in GSM antenna

Connector Description

BELL- / COM Siren output negative terminal / output

terminal / common return terminal

Z2 Security zone terminal

BELL+ Siren output positive terminal

Fig. No. 1

Fig. No. 2 Fig. No. 3

MANUAL ELDES EPIR2 INSTALLATION MANUAL V1.3

4. Conguration & Control

ATTENTION! In this user manual the underscore symbol ”_” represents one space character. Every underscore symbol must be

replaced by a single space character. There must be no space or other unnecesary characters at the beginning and at the end of

the message. XXXX – 4-digit SMS password (the default SMS password is 0000 – four zeros).

The system conguration and control can be performed by sending SMS messages to EPIR2 phone number, using EKB3W wireless

keyboard, via USB connection locally or GPRS connection remotely using ELDES Conguration Tool software, which is recommended

for quick and more convenient system conguration.

4.1 Primary System Conguration

1. Set the language. See chapter 4.4.1 SMS Language for more details.

2. Change the default SMS password. See chapter 4.4.2 Passwords for more details.

3. Set the phone number for User 1. See chapter 4.4.3 User Phone Numbers for more details.

After completing these steps the system is ready for further conguration.

If you fail to receive an SMS reply from the system, please, check the SMS centre phone number.

4.2 Ways of System Conguration

In order to congure and control the system using SMS message, send the text command to EPIR2 system phone

number from one of the preset user phone numbers. The structure of SMS message consists of 4 digit SMS password

(the default SMS password is 0000 – four zeros), the parameter and value. For some parameters the value does not

apply, i.e. STATUS.

The system conguration and control by EKB3W wireless keyboard is performed by activating the Conguration Mode

using the administrator password (the default administrator password is 1470) and entering a valid conguration com-

mand using the number keys (0... 9) and [#] key for conrmation. The indication of each pressed key is provided by zone

red LEDs when entering a conguration command. The structure of standard conguration command is a combination

of digits. EKB3W conguration command and valid parameter value range are indicated in brackets.

NOTE: Due to battery power saving reasons the keyboard LEDs and back-light are turned o in 10 seconds (by default) after the last

key-stroke. To invoke EKB3W, press any key once. However, this key-stroke will be considered as the rst character of the command.

SMS centre phone number is stored in a SIM card by the GSM operator, therefore if the SIM card has

already been successfully used to send SMS messages from a mobile phone, then it is not necessary

to change the SMS centre number.

This command activates and deactivates the Conguration Mode.

Set SMS Centre

Phone Number

Conguration

Mode

SMS text:

0000_SMS_+4411111111111

Example: 0000_SMS_+446545417732

Enter administrator password:

[*aaaa#]

Value: aaaa – 4-digit adiministrator password.

SMS

EKB3W

SMS

EKB3W

EKB3 indications which are relevant during Conguration Mode are described in the table below.

Indication Description

Red LED ARMED ashing Conguration mode activated successfully.

Yellow LED SYSTEM ashing Valid parameter is entered and waiting for value.

1 Long Beep Non-existing command or parameter value entered.

3 Short Beeps Command entered successfully.

NOTE: The system can be congured using one keyboard at a time only. Other connected keyboards become inactive in Con-

guration Mode.

Software ELDES Conguration Tool is intended to work directly with EPIR2 alarm system, which can be connected to the

computer via USB port or via GPRS connection remotely. This software simplies system conguration process by allow-

ing to use a personal computer in the process. Before starting to use ELDES Conguration Tool, please, read user guide

available in the software’s HELP section. ELDES Conguration Tool is freeware and can be downloaded from ELDES website

at: www.eldes.lt

4.3 Remote System Conguration via GPRS Connection

Before conguring EPIR2 remotely via GPRS connection, make sure that:

• SIMcardisinsertedintoEPIR2device.

• MobileinternetserviceisenabledontheSIMcard.

• PowersupplyisconnectedtoEPIR2.

• DefaultSMSpasswordischangedtoanew4-digitpassword;

• AtleastUser1 phone number is set up.

4.3.1 Establishing Remote Connection Between EPIR2 System and Conguration Server

CONFIGU

RATION

TOOL

In order to activate a remote GPRS connection between EPIR2 system and ELDES congu-

ration server, please, send the following SMS message from user phone number.

Upon the successful SMS message delivery, the system establishes a connection session for

20 minutes. An SMS reply, containing device IMEI number and conrming a successful con-

nection establishment, is sent shortly.

In case it is necessary to establish a connection between EPIR2 system and a third-party con-

guration server, send the following SMS message.

SMS text:

XXXX_stcong

Example: 1111_stcong

SMS text:

XXXX_stcong:IPaddress:Port

Value: Ipaddress – public IP address of third-party conguration server; Port –

port number of third-party conguration server, HostName - public host-name of

third-party conguration server.

Example: 1111_stcong:62.80.115.102:4522

Initiate the

Connection to

ELDES Server

Initiate the

Connection to

Third-Party Server

SMS

SMS or XXXX_stcong:HostName:Port

NOTE: Public IP address (host-name) and port number are necessary when connecting to a third-party-server for the rst time

only. When connecting to the server next time, XXXX_stcong is enough as the IP address (host-name) and port number are

saved in the device memory after the rst successful connection.

Altri manuali per EPIR2

Indice

Altri manuali Eldes Sistema di sicurezza

Manuali Sistema di sicurezza popolari di altre marche

Inner Range

Inner Range Concept 2000 Manuale utente

Climax

Climax Mobile Lite R32 Istruzioni per il montaggio

CADDX

CADDX NX-6 Manuale utente

FBII

FBII XL-31 Series Manuale utente

Johnson Controls

Johnson Controls PENN Connected PC10 Manuale utente

Aeotec

Aeotec Siren Gen5 Manuale utente

Blaupunkt

Blaupunkt SA 2700 Manuale utente

IDEAL

IDEAL Accenta Manuale del proprietario

AJAX

AJAX DoubleButton Manuale utente

Swann

Swann SW-P-MC2 Manuale utente

Ecolink

Ecolink Siren+Chime Manuale utente

Digital Monitoring Products

Digital Monitoring Products XR150 Manuale utente

EDM

EDM Solution 6+6 Wireless-AE Manuale utente

Highway Safety Group

Highway Safety Group EA401 Manuale utente

Siren

Siren LED GSM Manuale utente

Detection Systems

Detection Systems 7090i Istruzioni per il montaggio

Se-Kure Controls

Se-Kure Controls MicroMini SK-4841 Manuale utente

Siemens

Siemens FDM273 Manuale utente