ElectrIQ iq-51FX Guida utente
IMPORTANT SAFETY INSTRUCTIONS
•Read all instructions. All user guidelines must be
read before the device is used.
•Retain the instructions for further use.
•For indoor use only. Do not position the unit
where it would be subjected to extreme moisture,
temperature, or dust.
•Do not use in bathrooms or other humid places.
•There are no user maintainable parts, do not
attempt to disassemble or repair.
•Do not place the device near a heat source, or
expose to direct sunlight.
INTRODUCTION
Thank you for purchasing an electriQ Wifi controlled device.
INSTALLATION OF APP
Before installation download the IPCameraHBP app either using
the QR codes below or searching in your chosen app store.
ANDROID IOS
CONNECTING THE CAMERA TO YOUR WIRELESS
NETWORK (Recommended Ethernet method)
Please note the camera can only be connected to a 2.4ghz
network. If your router is also able to operate at 5ghz
(Dualband), the 2.4ghz MUST be given a different name
(SSID) to the 5ghz network and the connection made to the
2.4ghz network only. Further details on changing the SSID
of your router are available from your ISP / Router
manufacturer.
Situate your camera next to the
router and connect it to the router
using the supplied ethernet cable.
Plug the camera into the mains, and
leave around 30 seconds for it to
connect to your network.
1. Open the App on
your phone, and select the
option to add a camera.
2. Select the skip button in the bottom
right corner ( As the camera is to be
initially connected by Ethernet )
3. Use the scan button to scan the
QR code on the under side of the
camera, or alternatively the code
from the bottom of the QR code
label can be typed into the UID
Box. The default password of
'admin' should also be entered in
the Security Code box. Press the
OK button in the bottom right.
4. Press the camera to access
the live feed
5. It will then ask you to create a new
password for the unit, please enter
the old password as admin, and
type a new password twice before
clicking next.
If you do not require the camera to
communicate with your router
wirelessly installation is now
complete.
CONNECTING TO WIFI
6. Press on the down arrow to
the right of the camera
7. Press the option for Edit
Camera
8. On the Edit Camera Screen press
the Advanced button
9. Press the Manage Wi-Fi networks
button.
10. Select your 2.4 ghz wireless
network from the drop down
list, and enter your wireless
password before pressing
OK.
11. The Wifi connection status
will be displayed in the Wi-Fi
Setting section of the
Advanced Settings screen.
Once this shows as
connected, Press OK to exit
the screen, disconnect the
Ethernet cable, and the
camera can now be viewed
wirelessly.
electriQ UK SUPPORT
www.electriQ.co.uk/support
Service Line: 0871 620 1057
Office hours: 9AM - 5PM Monday to Friday
www.electriQ.co.uk
Unit J6, Lowfields Business Park
Lowfields Way, Elland
West Yorkshire, HX5 9DA
Disposal: Do not dispose this product as
unsorted municipal waste. Collection of such
waste must be handled separately as special
treatment is necessary.
Recycling facilities are now available for all customers at
which you can deposit your old electrical products.
Customers will be able to take any old electrical equipment
to participating civic amenity sites run by their local
councils. Please remember that this equipment will be
further handled during the recycling process, so please be
considerate when depositing your equipment. Please
contact the local council for details of your local household
waste recycling centres. U
Indice
Altri manuali ElectrIQ Telecamera IP
