Electro-Voice Compact Full-Range Speaker EVID 4.2 Manuale utente

EVID Surface‑mount loudspeakers

EVID 4.2, EVID 4.2W, EVID 4.2T, EVID 4.2TW, EVID 6.2, EVID 6.2W,

EVID 6.2T, EVID 6.2TW

en Installation manual

EVID Surface-mount loudspeakers Table of contents | en 3

Bosch Security Systems, LCC Installation manual 2023-07 | 04 | F.01U.177.642

Table of contents

1Safety 4

2Introduction 5

2.1 Applicable products 5

2.2 Parts included 5

2.3 System features 6

2.4 Accessories 7

3Installation 9

3.1 Mounting the SAM bracket to the wall or ceiling 9

3.2 Selecting the wattage tap 9

3.3 Mounting the speaker to the SAM bracket 10

3.4 Attaching the wiring to the terminal connector and wiring the speaker 11

3.5 Installing a secondary safety cable to the safety point 12

3.6 Testing the system operation 13

4Troubleshooting 14

5Maintenance 16

5.1 Painting the EVID speakers 16

6Technical data 17

7Uniform Limited Warranty 18

4en | Safety EVID Surface-mount loudspeakers

2023-07 | 04 | F.01U.177.642 Installation manual Bosch Security Systems, LCC

1 Safety

Warning!

Suspending any object is potentially dangerous and should only be attempted by individuals

who have a thorough knowledge of the techniques and regulations of suspending objects

overhead. Electro-Voice strongly recommends that loudspeakers be suspended taking into

account all current national, federal, state, and local laws and regulations. It is the

responsibility of the installer to ensure all loudspeakers are safely installed in accordance

with all such requirements. When loudspeakers are suspended, Electro-Voice strongly

recommends the system be inspected at least once per year or as laws and regulations

require. If any sign of weakness or damage is detected, remedial action should be taken

immediately. The user is responsible for making sure the wall, ceiling, or structure is capable

of supporting all objects suspended overhead. Any hardware used to suspend a loudspeaker

not associated with Electro-Voice is the responsibility of others.

Safety point

As an added safety measure, it is strongly recommended to utilize a properly rated secondary

safety cable (provided by the installer) to securely fasten the speaker from the safety point on

its back to a secondary mounting structure on the building.

EVID Surface-mount loudspeakers Introduction | en 5

Bosch Security Systems, LCC Installation manual 2023-07 | 04 | F.01U.177.642

2 Introduction

Thank you for purchasing EVID™ Series loudspeakers. Read through this manual to familiarize

yourself with the features, applications, and precautions before you use these products.

EVID™ Series loudspeakers use innovative design and materials to provide premium-level

performance from compact surface-mount speakers.

EVID™ 4.2 models

The compact EVID™ 4.2 delivers very full range sound from its dual 4-inch LF drivers and a 1-

inch titanium tweeter with waveguide. It is able to deliver a 110-dB sound level over a wide

coverage area. The EVID™ 4.2T includes a multi-tap transformer for 70V or 100V line

distribution systems.

EVID™ 6.2 models

The EVID™ 6.2 is an extended-range high-output loudspeaker with dual 6.5-inch woofers and a

1-inch titanium tweeter with waveguide, designed for high SPL over a wide coverage area. The

EVID™ 6.2T includes a multi-tap transformer for a 70V or 100V line distribution system.

2.1 Applicable products

This manual is applicable to these products:

8-ohm impedance

– EVID 4.2 Surface mount speaker 4" 8 Ohm bk pair

– EVID 4.2W Surface mount speaker 4" 8 Ohm wh pair

– EVID 6.2 Surface mount speaker 6" 8 Ohm bk pair

– EVID 6.2W Surface mount speaker 6" 8 Ohm wh pair

70- and 100-volt equipped units

– EVID 4.2T Surface mount speaker 4" 70/100V bk pair

– EVID 4.2TW Surface mount speaker 4" 70/100V wh pair

– EVID 6.2T Surface mount speaker 6" 70/100V bk pair

– EVID 6.2TW Surface mount speaker 6" 70/100V wh pair

2.2 Parts included

Make sure that all parts are included and not damaged. If the packaging or any parts are

damaged, contact your shipper. If any parts are missing, contact your Sales or Customer

Service Representative.

EVID 4.2 and EVID 6.2 models

Quantity Component

2 Loudspeaker system (A)

2 SAMTM assembly (B)

2 Large logo cap (C)

2 Small logo cap (C)

1 Installation manual (D)

1 Warranty card (E)

6en | Introduction EVID Surface-mount loudspeakers

2023-07 | 04 | F.01U.177.642 Installation manual Bosch Security Systems, LCC

Quantity Component

1 SAMTM mounting tool (F)

ED F

2.3 System features

– Line-array enhanced coverage control.

– Organic, unobtrusive shape.

– SAM™ (Strong-Arm-Mount™) system for secure and reliable mounting.

– Extremely large loudspeaker swing and rotation ranges for flexible placement and

coverage everywhere.

– Full bandwidth overload protection.

– Weather resistant and paintable.

– Dual LF transducers.

– Extended bass.

– Greater power handling and output.

– Titanium HF transducers (4.2, 6.2 waveguide coupled).

– High sensitivity.

– Shielded for video applications.

EVID 4.2 and EVID 6.2 models

EVID Surface-mount loudspeakers Introduction | en 7

Bosch Security Systems, LCC Installation manual 2023-07 | 04 | F.01U.177.642

A. Shielded dual woofers

B. Coherent Coverage Waveguide horn

(4.2 and 6.2 only)

C. Dual low-frequency ports

D. Treated woofer cones

E. Durable zinc-plated steel grille (not shown)

F. Cast aluminum Strong-Arm-Mount™(SAM™)

G. Over 100 degreesof swing;90 degrees

of rotation

H. Simple keyed socket head adjustments

I. Titanium dome tweeters with neodymium

magnet structures

(E)

Figure2.1: EVID features (front)

Figure2.2: EVID features (back)

2.4 Accessories

SAM™ (Strong-Arm-Mount™) System

EVID™’s SAM™ system (Strong-Arm- Mount™) excels at meeting the four requirements for

mounting FGM/BGM systems: simple, quick, versatile, and reliable.

Three easy steps and you are done:

1. Attach the surface bracket to the wall or ceiling.

2. Attach the EVID™ enclosure to the bracket with the sockethead bolt.

3. Aim the enclosure and tighten the bolt.

8en | Introduction EVID Surface-mount loudspeakers

2023-07 | 04 | F.01U.177.642 Installation manual Bosch Security Systems, LCC

SAM™ allows greater flexibility for aiming than ball-type mounts that limit range of motion

when not on center. Typical ball designs have limited rotation when pointing straight ahead,

and even that is reduced when the enclosure contacts the wall and is moved off axis. By

contrast, SAM™ allows full rotation even at full sweep.

SAM™’s range of rotation is 90°. EVID™’s curved cabinet allows it to rotate much further than a

rectangular or trapezoidal box).

90°

Figure2.3: Rotation range (90°)

SAM™’s range of sweep motion left and right on the wall is 100° for all models.

100°

Figure2.4: Sweep range (100°)

EVID Surface-mount loudspeakers Installation | en 9

Bosch Security Systems, LCC Installation manual 2023-07 | 04 | F.01U.177.642

3 Installation

3.1 Mounting the SAM bracket to the wall or ceiling

Before you mount the SAMTM bracket to the wall or ceiling:

4Determine whether you want to mount the bracket on the left or right side of the speaker

before you bolt the speaker to the bracket.

You can mount the SAM™ bracket on either side of the speaker. This enables optimal

configuration for any installation. It is best to mount the bracket on the side away from the

direction in which the speaker will be aimed. This ensures that the full swing angle is available

for aiming on that side and provides easier access to the swing tightening bolt on the wall

bracket (see Fig. 10, Step 3).

Warning!

Make sure the mounting surface can support more than the speaker's weight. Use only

industry-accepted fasteners and mounting methods when mounting the bracket. Consult an

expert if you are not sure.

For standard vertical installation, mount the SAM™ bracket on the side.

SAM™

Figure3.1: SAMTM mounted on side

For horizontal mounting configurations, mount the bracket on the bottom side. It is easiest

and safest, and allows mounting the speaker closer to the ceiling.

SAM™

Ceiling

Figure3.2: SAMTM mounted on bottom

3.2 Selecting the wattage tap

This instruction is applicable to EVID 4.2T , EVID 4.2TW , EVID 6.2T , and EVID 6.2TW models

only.

Before mounting the speaker to the bracket:

4Select the proper wattage tap setting for your installation.

The wattage selector switch is located at the rear of the speaker below the input terminal

panel. A guide on the back of each speaker shows which switch positions to use for the power

settings at 70V and 100V.

EVID 4.2T and

EVID 4.2TW

The power taps are 30W, 15W and 7.5W at both 70.7V and 100V, with a 3.7W tap for

70.7V only, as well as an 8Ohm transformer bypass setting.

10 en | Installation EVID Surface-mount loudspeakers

2023-07 | 04 | F.01U.177.642 Installation manual Bosch Security Systems, LCC

EVID 6.2T and

EVID 6.2TW

The power taps are 60W, 30W and 15W at both 70.7V and 100V, with a 7.5W tap for 70.7V

only, as well as an 8Ohm transformer bypass setting.

3.3 Mounting the speaker to the SAM bracket

Bolt A

(swing)

Bolt B

(rotation)

15° angle markers

Figure3.3: Tighten socket head bolts

1. Attach the speaker to the SAM™ bracket with bolt B.

2. Adjust the horizontal position of the speaker.

3. Tighten the locking bolt A with an Allen wrench (supplied).

If available, use an Allen wrench with a longer handle to make it easier to apply the

necessary force to achieve the recommended torque. Refer to Recommended torque

settings for bolts A and B.

4. Adjust the vertical angle of the speaker.

5. Tighten the locking bolt B with an Allen wrench (supplied).

If available, use an Allen wrench with a longer handle to make it easier to apply the

necessary force to achieve the recommended torque. Refer to Recommended torque

settings for bolts A and B.

Model Torque

EVID 4.2 models 30-50 in-lbs (3.4-5.2 N-m)

Altri manuali per Compact Full-Range Speaker EVID 4.2

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Electro-Voice Altoparlanti

Electro-Voice

Electro-Voice Xlci Series Xlci-118 Guida rapida

Electro-Voice

Electro-Voice PRO-LINE EVM-15L Manuale utente

Electro-Voice

Electro-Voice EVID Series Manuale utente

Electro-Voice

Electro-Voice EVID C4.2D Manuale utente

Electro-Voice

Electro-Voice EVID C8.2HC Guida utente

Electro-Voice

Electro-Voice EVC-1122-VIB Manuale utente

Electro-Voice

Electro-Voice PI6415 Manuale utente

Electro-Voice

Electro-Voice Xlc Series Xlc-127 Manuale utente

Electro-Voice

Electro-Voice LiveX ELX112 Manuale utente

Electro-Voice

Electro-Voice X-Array XF Manuale utente

Electro-Voice

Electro-Voice 30W Guida alle dimensioni

Electro-Voice

Electro-Voice EVID S Series Manuale utente

Electro-Voice

Electro-Voice SB121 Manuale utente

Electro-Voice

Electro-Voice EVID-P6.2B Manuale utente

Electro-Voice

Electro-Voice SRO/18 Guida alle dimensioni

Electro-Voice

Electro-Voice ZX Series ZX1i Manuale di istruzioni

Electro-Voice

Electro-Voice ZX1-90 Manuale utente

Electro-Voice

Electro-Voice SL6.2M Manuale utente

Electro-Voice

Electro-Voice ZLX-12P-UX Manuale utente

Electro-Voice

Electro-Voice SRO/15L Guida alle dimensioni

Electro-Voice

Electro-Voice LR4A Guida alle dimensioni

Electro-Voice

Electro-Voice Xi Series Xi-1191A Manuale utente

Electro-Voice

Electro-Voice F.01U.361.344 Manuale utente

Electro-Voice

Electro-Voice EVID 6.2 Manuale utente

Manuali Altoparlanti popolari di altre marche

argon audio

argon audio IE20 Manuale utente

Denon

Denon SC-N7 Manuale utente

Gemline

Gemline Ace 3952 Manuale utente

Focal

Focal ON WALL 300 Manuale di istruzioni

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuale utente

SoundLogic

SoundLogic BCCS-6/6395 Manuale utente

Peavey

Peavey DTH 218 Manuale utente

Avantree

Avantree Pluto Air Manuale utente

Morel

Morel Integra Series INTEGRA OVATION 4 Manuale utente

Oppo

Oppo SONICA Manuale utente

Bose

Bose SoundLink Wireless Music System Manuale utente

Rocksteady

Rocksteady Stadium Manuale utente

Bowers & Wilkins

Bowers & Wilkins 4 Manuale utente

Sonance

Sonance SONOS OUTDOOR Series Manuale utente

Pioneer

Pioneer XW-HTD630 Manuale utente

Onn

Onn BWA16AA002 Manuale utente

HP GL313AA - USB Speakers PC Multimedia Manuale utente

Tannoy

Tannoy SYSTEM 600a Manuale utente