REMOTE CONTROL FUNCTIONS
To activate the remote control, thank you for removing the transparent protective film.
1. To turn the unit on for music playback or standby mode (decorating LEDs will stay on).
2. STOP: When the unit is operating USB/SD playback mode, press this button to permanently stop
playing the source file. You need to press to restart playback.
3. Pressing this button to mute the unit’s speaker output at anytime. Press again to resume
speaker output.
4. MODE: Change the playback source mode in sequence of USB/SD/FM/LINE.
5. When playback from the USB/SD source, pressing this button to set repeat playback setting
(Single or All track repeat).
6. EQ: Under USB/SD source playback mode, press this button to select preset audio mode to suit your
listening pleasure(NORMAL/POP/ROCK/JAZZ/CLASSIC and display LED will show EQ0/EQ1/EQ2/EQ3
/EQ4 in same order).
7. : Previous song for USB/SD playback. Previous channel or fine tune frequency downwards for
radio operation. Long press for the SEEK down radio function.
8. : Next song for USB/SD playback. Next channel or fine tune frequency upwards for radio operation
(see description). Long press for the SEEK up radio function.
9. :During USB/SD playback mode, press this button to pause the playback. Press again to resume
playback. When the unit is operating in Radio mode, press this button to set the and button to
become Channel± or Fine Tune±.
10. Volume decrease.
11. Volume increase.
12. The number keys 0 –
9: During USB/SD playback mode, press the number combination to designate that song number
to start playback. During Radio Channel or Radio Frequency mode, press the number combination to
select the Channel number to play. (Note: When done pressing the number combination, just
wait 2 sec. and the system will automatically confirm your input).
CONTROLS ON FRONT SIDE ON THE UNIT
1. SD/MMC CARD Slot: Insert the SD/MMC card into the SD/MMC card slot,system will automatically
playback song on the memory card inserted. Or, you can press the MODE button until it shows SD
on the LED display to play songs from the already inserted memory card.
2. USB Slot: Insert the USB Flash Drive into the USB slot, system will automatically playback songs on
the USB Flash.Or you can press the MODE button until it show USB on the LED display to play song
from the already inserted USB Flash.
3. MODE: Press the MODE key until your desired playback source is selected. The cycling sequence of
mode selection is: USB ‐> SD ‐> FM ‐> LINE.
4. PREV/VOL‐:During USB/SD playback, short press this button to select previous song, long press to
reduce input source volume. During Radio Channel mode, short press to move to previous
pre‐memorized station channel number, long press to reduce volume. During Radio Frequency
mode, short press to fine tune downwards by 0.1MHz.
5. PLAY: During USB/SD playback, press this button to pause the playback. Press again to resume
playing and vice versa. During Radio mode, long press this button to initiate memory station search.
System will scan from lowest FM frequency to highest FM frequency and store all station signals in
sequence of channel number. Short pressing this button to determine the type of function that
NEXT and PREV button will perform. When flashing frequency number meaning FINE TUNE ±
