9
Troubleshooting
If all of the LEDs are on but there is no media ow, please check the following:
1) Is the mechanical slide gate valve above the MagnaValve fully open?
2) Is media available from the hopper?
3) Is there a blockage above or below the MagnaValve?
4) Is the magnetic eld completely cancelled when the “Valve On” LED is on? Check this by
removing the valve from the machine and applying the proper signals for 100% ow. Did all
of the shot fall from the valve?
If the problem can’t be identied or if you detect a problem with the magnetic eld,
contact Electronics Inc. Please have the following information ready.
1) Number of valves on the machine ___________________________________
2) Controller model _________________________________________________
3) Valve model____________________Valve serial number_________________
4) Media type ocast steel ocut wire ogrit oother___________________
5) Media size ______________________________________________________
6) Wheel size (hp)_______________ Wheel size (diameter) _________________
7) Desired wheel amperage (Amps) ____________________________________
8) Wheel speed (cpm) _______________________________________________
9) Blasting cycle time________________________________________________
10) Time between cycles ______________________________________________
Make note of LED indicators on the MagnaValve:
How do the MagnaValve LED indicators react during the blast cycle?
__________________________________________________________________________
Make note of LED indicators on the AC-24 Controller (if used):
How do the AC-24 Controller LED indicators react during the blast cycle?
__________________________________________________________________________
What does the AC-24 Controller display at the end of the blast cycle? _____________________
To expedite a solution, please send images of your valve installation,
the valve’s ID label and/or a video of the controller and valve driver during operation.
Troubleshooting with Skype is also recommended.
Electronics Inc.
Telephone: (574) 256-5001 or 1-800-832-5653 (USA and Canada)
Fax: (574) 256-5222
