Elegoo Neptune 4 Manuale utente

User Manual for NEPTUNE 4

3D Printer

Pictures are only for illustration purpose, please take actual product as standard.

V1.5

Thank you for choosing ELEGOO product!

For your convenience, please read this instruction manual carefully before use, the cautions and

tips in this manual can help you better avoid incorrect installation and use.

For questions or problems not covered in this manual, please contact us at this email address:

[email protected].

ELEGOO team is always ready to provide you with quality service.

To give you a better experience of our products, you can also gain knowledge of the operation of

the equipment in the following ways:

1.The instruction manual:You can find related instructions and videos in the U disk.

2.ELEGOO official website: www.elegoo.com You can go to our official website to find the relevant

operating instructions for the machine and contact information.

Cautions

1. Do not place the printer in vibrating or other unstable environments, as the shaking of the

machine will affect the print quality.

2. Do not touch the nozzle and heatbed when the printer is working to prevent high-temperature

scald and personal injury.

3. After printing, please take advantage of the residual temperature of the nozzle and clean the

filaments on the nozzle with the help of tools. Do not touch the nozzle directly with your hands

during cleaning to avoid scald.

4. Please do product maintenance frequently, and regularly clean the printer body with a dry cloth

to wipe away dust and sticky print material under the situation of power off.

5. 3D printers contain high-speed moving parts, so be careful not to get your hands caught.

6. Children must be supervised by adults when using the machine to avoid personal injury.

7. In case of emergency, please cut off the power directly.

Contents

Machine Parameters ---------------------------------------------------

Machine Structure Diagram -------------------------------------------

Packing List ---------------------------------------------------------------

Machine Installation -----------------------------------------------------

Operation Screen Introduction ----------------------------------------

Auto Leveling -------------------------------------------------------------

Model Test -----------------------------------------------------------------

Resume Printing Description ------------------------------------------

Software Installation -----------------------------------------------------

LAN Printing ---------------------------------------------------------------

Troubleshooting Guide -------------------------------------------------

Circuit wiring --------------------------------------------------------------

Machine Parameters

Print Parameters

Print Principle: FDM（Fused Deposition Modeling）

Build Size: 225X225X265(mm³)

Print Precision: ±0.1mm

Nozzle Diameter: 0.4mm

Print Speed: 30~500mm/s

Temperature Parameters

Ambient Enviroment Temperature: 5°C~40°C

Maximum Temperature of Nozzl: 300°C

Maximum Temperature of Hotbed: 110°C

Software Parameters

Slicer Software: Cura

Input Format: STL、OBJ

Output Format: Gcode

Connection Type: U Disk, LAN

Power Supply Parameters

Power Input: 100-120V/220-240V

Power Output: 24V

Physical Parameters

Machine Size: 475*445*515mm

Net Weight: 8.3kg

X-axis limit

switch

Lead Screws T8

Rigid Coupling

Filament tube

Filament holder

Filament detector

switch

X-axis belt

tensioner

Touch screen

Timing Pulley

X-axis

stepper

Z-axis

stepper

Y-axis

stepper

Power Switch

Y-axis belt

tensioner

Build

platform

Nozzle kit

Machine Structure Diagram

①②

③

U disk socket

Type-C interface

TF card interface

①

②

③

Note: The TF card interface is mainly used for

firmware upgrade of the driver part, and the

Type-C interface is mainly used for system

debugging.

Network cable

interface

ELEGOO 3D Printer

01 02

03 04 05 06 07

Fasteners

Tools

Packing List

（HM5*45）4pcs

（PM4*20）5pcs

（PM4*8） 1pcs

（HM4*M3*3) 1pcs

（PM4*45）3pcs

(1.5 / 2.0 / 2.5 / 3.0 / 4.0)

The above accessories shall be subject to actual products, and the pictures are for reference only.

Machine Installation

（HM5*45）4pcs

4.0 2.5

（PM4*20）3pcs

Attached U disk with an installation instruction video. ① ②

③ ④

3.0

（PM4*20）2pcs

（PM4*8） 1pcs

（HM4*M3*3) 1pcs

2.5

Filament detector installation:

Cable clamp installation:

When installing, you need to

organize the cables and fold

them together to install and

fix them.

⑤ ⑥

（PM4*45）3pcs

Please adjust the

voltage to match the

local voltage before use.

Filament detector switch

X-axis limit

switch

X-axis

stepper

Z-axis

stepper

Altri manuali per Neptune 4

Indice

Altri manuali Elegoo Stampante 3D

Elegoo

Elegoo Mars Series Manuale utente

Elegoo

Elegoo NEPTUNE 3 Manuale utente

Elegoo

Elegoo Neptune 4 Manuale utente

Elegoo

Elegoo Neptune3 Istruzioni per il montaggio

Elegoo

Elegoo Neptune 4 Plus Manuale utente

Elegoo

Elegoo NEPTUNE 3 Manuale utente

Elegoo

Elegoo MARS 4 Series Manuale utente

Elegoo

Elegoo Saturn 3 Ultra Manuale utente

Elegoo

Elegoo Neptune 4 Plus Manuale utente

Elegoo

Elegoo Neptune 2 Manuale utente

Elegoo

Elegoo NEPTUNE 4 PRO Manuale utente

Elegoo

Elegoo Neptune Foglio di istruzioni

Elegoo

Elegoo NEPTUNE 3 MAX Manuale utente

Elegoo

Elegoo MARS 3 Manuale utente

Elegoo

Elegoo NEPTUNE 3 PRO Manuale utente

Elegoo

Elegoo PHECDA Manuale utente

Elegoo

Elegoo NEPTUNE 3 PRO Manuale utente

Elegoo

Elegoo Neptune 2 Manuale utente

Elegoo

Elegoo NEPTUNE 4 PRO Manuale utente

Elegoo

Elegoo NEPTUNE 4 PRO Manuale utente

Elegoo

Elegoo Neptune 3 Plus Manuale utente

Elegoo

Elegoo Saturn 4 Ultra Manuale utente

Elegoo

Elegoo Neptune 4 Max Manuale utente

Elegoo

Elegoo SATURN 2 Manuale utente

Manuali Stampante 3D popolari di altre marche

Ultimaker

Ultimaker S5 Material Station Manuale utente

EcubMaker

EcubMaker TOYDIY Manuale utente

AnyCubic

AnyCubic Kossel Plus Manuale utente

ReDeTec

ReDeTec ProtoCycler Manuale utente

Kywoo3D

Kywoo3D Tycoon IDEX Manuale utente

CraftBot

CraftBot PLUS PRO Manuale utente

3DGence

3DGence INDUSTRY F340 Manuale utente

HP Jet Fusion 4200 Istruzioni operative

Rokit

Rokit AEP Series Manuale utente

AnkerMake

AnkerMake M5 Manuale utente

DIYElectronics

DIYElectronics PRUSA I3 Istruzioni per il montaggio

Ackuretta

Ackuretta FreeShape 120 Manuale utente

LONGER

LONGER LK5Pro Manuale utente

Stratasys

Stratasys J850 Manuale utente

MakerBot

MakerBot Replicator Manuale utente

Stratasys

Stratasys FDM Vantage Series Manuale utente

ZYYX

ZYYX Pro II Manuale utente

FLASHFORGE 3D PRINTER

FLASHFORGE 3D PRINTER Creator Guida utente