Elite Screens Sable Frame B2 Series Manuale utente

11092020JA www.elitescreens.com U-00199 1

Sable Frame B2 Series

Matte White Fixed Frame Screen

Featuring

CineWhite® UHD 2

USER’S GUIDE – M Type

__________________________________________________________________________________________

Congratulations on your new Sable Frame B2 purchase! The material included is our ISF Certified CineWhite®

UHD 2which produces accurate colors in a light controlled environment which reproduces the content as the

director intended.

In order for the CineWhite® UHD 2 to maintain its projection qualities and optimum performance please refer to

the list below for proper maintenance and cleaning.

•Use a dry microfiber cloth to remove dust from the screen’s surface.

•When cleaning, use a damp microfiber cloth with warm water to remove any marks.

•Never rub or apply pressure when cleaning the surface.

•Never attempt to use any solutions, chemicals, or abrasive cleaners on the screen surface.

•In order to avoid damaging the screen, avoid touching it directly with your fingers, pens/pencils or any

other sharp or abrasive objects.

11092020JA www.elitescreens.com U-00199 2

Frame Parts List

A. Vertical Frame x 2pcs

B. ½ Horizontal Frame x2 pcs

C. ½ Horizontal Frame x 2 pcs

Hardware Parts List

a. M4*4

b. D5*4

c. M4*4

d. D5*4

Item

Parts List

100”

110”

120”

135”

150”

Center Joints- M4 (bottom position)

Center Joints-D5 (top position)

Elbow Joints M4 (bottom position)

Elbow Joints D5 (top position)

Top hanging brackets

Bottom brackets

M4x7 Screws

Spring

Pull Hook

Wall Screws M5x50

Hollow Wall anchors

Center Support Bar

White gloves

Φ3 mm Long Iron (sides) rod /Short rod (top/bottom)

2/4

C+B

B+C

Red

Black

11092020JA www.elitescreens.com U-00199 3

Frame Assembly

Step 1: Place the EPE sponge (foam)

sheet on the ground of the area where

the screen will be assembled.

Step 2: Position the pieces of the frame

on the EPE sponge in the arrangement

shown below.

Step 3: Insert center joint (a/b) connectors into one-half of the horizontal frame (B/C) and secure with the

M4x7 screws (g) as shown in the illustration below.

Tip: The center joint (b) with the larger diameter holes should be on top.

Step 4: Connect the elbow joints (c/d) to the top and bottom sections of the vertical frame. Once inserted,

connect the vertical sections to the horizontal frame sections. Make sure all holes are in alignment and the frame

pieces are flush (no gaps). They should form perfect right angles.

Tip: The elbow joint (d)with the larger diameter holes should be on top.

Step 5: Secure the elbow joints by fastening them with M4x7 screws (g), 4 at each corner.

11092020JA www.elitescreens.com U-00199 4

Screen Material

Step 6: Put on the white gloves (p) and

carefully unroll the screen material on a

clean surface from the roller to the other

side as shown below. The back side of the

screen material should be placed upwards.

Then place a bottom grommet (r) on the

screen material’s eyelet and snap in the top

grommet (s) as shown below.

Repeat the process for all eyelets.

Step7: Carefully place the screen on top of the

assembled frame as shown below.Make sure that

the angular edges of the frame are not allowed to

come into direct contact with the screen material to

avoid puncturing.

Step 8: Insert the rods (r) through the sleeves according to their corresponding lengths on each edge of the

screen as shown below. The short rods (top/bottom) will overlap to secure a firm grasp in the middle areas.

Front

Back Side

r. (Red tips)

Back Side

r. (Black tips)

Back Side

Back

Side

Go through the hole

from bottom to top

11092020JA www.elitescreens.com U-00199 5

How to attach the springs

Step 9: Hook one end of the spring and secure inside the groove of the frame, use the spring hook (i)to attach

the spring to the hole located on the screen material’s outer edge in the following order.

First connect on four corners, steps 1-4. make

sure all four corners are fixed before proceeding

with next spring.

Continue to attach the remaining springs to the material in steps 5-12 in the follow order.

Step 10: Insert the Center Support Bar (o) into the upper top groove on the back of the frame with the bottom end

near the approximate center point of the frame and rotate it in at an angle so that both ends of the bar are in

alignment with the groove.

Diagonal Models 150” and below use 1 x Center Support Bar

Spring must hook both

overlapping short rods.

11092020JA www.elitescreens.com U-00199 6

Installation

Step 11: Measure the overall length and

height of the frame and drill holes for the top

brackets. Line up the wall brackets with the

drilled holes on the installation location and

screw them in using a Phillips screwdriver. If

not installing into a structural wood stud, use

a hollow wall anchor then screw in the M5x50

wood screws with a screwdriver. Make sure

the brackets are leveled.

Step 12: Position the fixed frame screen onto the top wall brackets as shown below and push down at the center

of the top of the frame to secure.

Step 13: With the frame slightly tilted outward; connect the bottom brackets onto the bottom groove of the frame.

Slowly return the screen to a normal upright position. Once the screen is flush to the wall, secure the brackets to

the wall with a screw. If not installing into a structural wood stud, mark the sites where the hollow wall anchors

will be placed using the same instructions above. With the wood anchor installed, repeat the process and fasten the

brackets with the M5x50 wood screws.

For Technical Support or an Elite Screens contact in your area,

visit www.elitescreens.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Elite Screens Schermo di proiezione

Elite Screens

Elite Screens OMS103HR Manuale utente

Elite Screens

Elite Screens TE100HC2 Manuale utente

Elite Screens

Elite Screens MicroFlip Screen Manuale utente

Elite Screens

Elite Screens Insta-DE Series Manuale utente

Elite Screens

Elite Screens TE100HC2 Manuale utente

Elite Screens

Elite Screens GolfSim Bay Series Manuale utente

Elite Screens

Elite Screens Evanesce Tension B Series Manuale utente

Elite Screens

Elite Screens TE100HC2 Manuale utente

Elite Screens

Elite Screens Electric100H Manuale utente

Elite Screens

Elite Screens Home100IWH2-A Manuale

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

Elite Screens

Elite Screens VMAX113XWS Manuale

Elite Screens

Elite Screens EDGE FREE Aeon Series Manuale utente

Elite Screens

Elite Screens Kestrel Series Guida di riferimento rapido

Elite Screens

Elite Screens Sable Frame B2 Series Manuale utente

Elite Screens

Elite Screens QuickFold Q100V Manuale utente

Elite Screens

Elite Screens QuickStand Drape Series Guida di riferimento rapido

Elite Screens

Elite Screens F100NWH Manuale utente

Elite Screens

Elite Screens EDGE FREE Aeon Series Manuale utente

Elite Screens

Elite Screens Manual Series Manuale utente

Elite Screens

Elite Screens Elite Tripod Series Manuale utente

Elite Screens

Elite Screens Kestrel Series Manuale utente

Elite Screens

Elite Screens Evanesce Tab-Tension B Series Manuale utente

Elite Screens

Elite Screens YARD MASTER MANUAL SERIES Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

OS РХ-090Н Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente

Draper

Draper Envoy Manuale

SI Dynamic 2 XL Manuale utente

Draper

Draper Nocturne+ E Istruzioni per l'installazione