Elite Screens VMAX2 (Plus) Series Guida

Updated 3/22/2017 1 www.elitescreens.com

Tubular Motor Replacement Instructions

for VMAX2 models 135” and above / Spectrum models 135” and above

For technical support or further assistance, call 877-511-1211 x604

ATTENTION:

Elite Screens does not recommend making unnecessary adjustments to the screen, as improper

adjustments will damage the unit and void your warranty.

1. Remove the screws on the motor bracket and left end cap (facing the screen) with a Phillips

screwdriver, then remove the end cap.

2. After removing the end cap, carefully remove the decorative sheet by pulling it outward towards

the open end.

Decorative sheet

Decorative sheet removed

End cap

screws

Motor bracket

screws

Updated 3/22/2017 2 www.elitescreens.com

3. Remove the power cord and 3P cable, shown in the image below.

4. Using the screwdriver, at the right side end cap, push the roller out to expose the roller on the

open left side end of the housing. Being sure not to snag or scratch the material on the housing, lift

and pull the roller out from the left side enough to access the ground terminal.

5. Cut off the ground terminal and remove the motor.

Screwdriver pushing out

roller from right side

Ground

Terminal

Power cord

Ground Terminal

removed

Motor

Housing

Roller

Updated 3/22/2017 3 www.elitescreens.com

6. Separate the motor from the motor bracket and attach the same bracket to the new motor.

7. Install the new motor. Be sure to align the drive wheel with the ladder on the roller.

8. Place the bracket into the housing where the RJ45 port on the circuit board lines up with the hole

on the housing.

9. Two people are suggested for this step. While one person keeps hold of the left side, the other

will need to loop thin rope or twine around the motor cap on the right side of the roller. (This will help

guide the roller back into the housing and reconnect with the shock absorber core.) Push in the left

side end cap back into the housing while carefully guiding the right end of the roller into place.

Roller

Motor

RJ45 port

Remove the

motor bracket

from here

Updated 3/22/2017 4 www.elitescreens.com

10. After inserting the motor into the housing, insert the power cord and the 3P cable into the circuit

board. Then connect the power cable to the ground of the motor cable and clamp it with the ground

terminal.

11. Affix the ground terminal to the bracket and housing with screws removed in step 1.

Shock absorber core

Motor cap

Rope or

twine

Power cord

Power cable/Motor cable

Power cable/Motor cable clamped with ground terminal

Ground terminal

Updated 3/22/2017 5 www.elitescreens.com

12. Replace the decorative sheet removed in step 2.

13. Replace and secure the end cap with screws removed in step 1.

NOTE: After replacing the tubular motor, you may need to adjust the limit switch to drop the screen at

your preferred height.

For a local Elite Screens contact or Technical Support, please visit

www.elitescreens.com

Finished assembly.

Altri manuali per VMAX2 (Plus) Series

Indice

Altri manuali Elite Screens Schermo di proiezione

Elite Screens

Elite Screens CineTension2 Series Manuale utente

Elite Screens

Elite Screens Starling Tension Series Manuale utente

Elite Screens

Elite Screens Elite Home Series Manuale utente

Elite Screens

Elite Screens Elite Tripod Series Manuale utente

Elite Screens

Elite Screens Manual SRM Pro Series Manuale utente

Elite Screens

Elite Screens 100 series Manuale utente

Elite Screens

Elite Screens 2 CLR Series Manuale utente

Elite Screens

Elite Screens OMS103HR Manuale utente

Elite Screens

Elite Screens AR100H2 Manuale utente

Elite Screens

Elite Screens PicoScreen Series Manuale utente

Elite Screens

Elite Screens YardMaster Manual Series Manuale utente

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

Elite Screens

Elite Screens Vmax Series Manuale utente

Elite Screens

Elite Screens YardMaster 2 WraithVeil Dual Series Manuale utente

Elite Screens

Elite Screens F100XWH1 Manuale utente

Elite Screens

Elite Screens Tripod Portable Series Manuale utente

Elite Screens

Elite Screens Starling 2 Series Manuale utente

Elite Screens

Elite Screens Evanesce B Series Guida

Elite Screens

Elite Screens Spectrum Series Manuale utente

Elite Screens

Elite Screens Lunette Series Manuale utente

Elite Screens

Elite Screens Evanesce B Series Manuale utente

Elite Screens

Elite Screens EDGE FREE Aeon Series Manuale utente

Elite Screens

Elite Screens VMAX Tab-Tension Dual Series Manuale utente

Elite Screens

Elite Screens M85XWS1-SRM Manuale utente

Manuali Schermo di proiezione popolari di altre marche

FART PRODUKT

FART PRODUKT Standard SCREEN Manuale utente

Draper

Draper E Series Manuale

Laarhoven

Laarhoven Companion II Manuale utente

Renogy

Renogy RMS-LFPS-US Manuale utente

Da-Lite

Da-Lite ExecutiveElectrol Manuale utente

Samsung

Samsung S*H65* Manuale utente

FONESTAR

FONESTAR PPTR-43100-FA Manuale utente

Slide Clear

Slide Clear Varro XL Manuale utente

OS РХ-090Н Manuale utente

Niko

Niko 10-845 Manuale utente

Speaka Professional

Speaka Professional 2357532 Manuale operativo

Sima

Sima XL-72 Manuale utente

Jasic

Jasic EVO 2.0 ET-200P Manuale utente

InFocus

InFocus SC-WALL GRY-92H Manuale

Barco

Barco OverView MVL-615 Manuale utente

Draper

Draper Envoy Manuale

SI Dynamic 2 XL Manuale utente

Draper

Draper Nocturne+ E Istruzioni per l'installazione