Elmo EV 4400 AF Manuale utente
1
Elmo EV 4400 AF Visual Presenter
Document Camera
User Guide
Control Panel
Overview 2
Front Control Panel 2 - 3
Additional Range with Column Height Adjustment 4
White Balance and Iris Control 4
2
Overview
The Elmo document camera is a visual presentation unit that can display a
variety of presentation materials.
Text, photos, slides, negatives, transparencies, drawings and three-dimensional
objects can be displayed in full color for local presentations and over the
Distance Learning network. The zoom lens can clearly display items as small as
the date on a dime.
The document camera has two built in lights to illuminate the objects being
presented, and a base light to illuminate slides and transparencies from beneath.
• The power cable should be
plugged securely into the unit.
• The power switch is located
on the left at the rear of the unit.
Elmo Front Control Panel
Lamp Choose the UPPER lamps for lighting opaque materials or BASE for
slides, photographic negatives, and some transparencies.
Zoom Controls the image size displayed. TELE will increase the size of the
image and WIDE will decrease the size.
Auto Focus Allows you to automatically find the proper focus of a flat
document or object on the document stage.
3
Elmo Slide Out Operations Panel
Usually, this
panel is kept
inside the main
body. When
the PUSH par
is pushed, thi
panel becomes
ready for
operation.
t
s
Input Selection
For Distance Learning, the input selection should always be left
on MAIN.
Magnification This will increase the magnification to 2x.
See important notes on font, format, and image size in the
Presentation section of the Distance Learning Handbook.
Color – B/W Choose either a color or black and white image display. In some
cases, changing to color or B/W can make an image more readable.
Posi/Neg Conversion Choose either a positive or negative image display.
In some cases, changing to negative or positive can make printed materials more
readable. It is also possible to display photographic negatives in true color (as if
they were positive transpariencies).
Iris Adjustments Iris adjustments will change the exposure or brightness of
the image.
4
White Balance White balance can be set with the one-touch button.
The Presenter Camera automatically adjusts the color balance (AUTO mode). If,
however, this setting is lost, shoot the stage surface, and press the white balance
button [WHITE BALANCE] on the operation panel. The indicator lamp blinks and
then lights up, the mode is switched to the ONE-PUSH mode, and the white
balance is fixed.
When the white balance button [WHITE BALANCE] is pressed again, the
indicator lamp goes out, and the mode returns to the AUTO mode.
AUTO................. To set the white balance in the auto follow mode (initial setting).
ONE-PUSH ......... To set the push-set white balance. By pressing the button
[WHITE BALANCE], the white balance for the then color temperature is fixed.
Focus Allows you to manually fine tune the focus of the image displayed.
(It is also possible to adjust focus by turning the lens by hand.)
Information regarding some of the additional features of the Elmo EV 4400 is
available at: http://dl.neric.org/bdlp/MANUALS/EV-4400_Abdgd_Manual.pdf
Indice
Altri manuali Elmo Telecamera per documenti
Elmo
Elmo MX-1 Manuale utente
Elmo
Elmo P100 Manuale utente
Elmo
Elmo TT-12W Manuale utente
Elmo
Elmo TT-02S Manuale utente
Elmo
Elmo P30 Manuale utente
Elmo
Elmo TT-12 Guida all'installazione
Elmo
Elmo EV-2000AF Manuale utente
Elmo
Elmo HV-8500SX Manuale utente
Elmo
Elmo EV-8000AF Manuale utente
Elmo
Elmo TX-1 Manuale utente
Elmo
Elmo Visual Presenter EV-4450AF Manuale utente
Elmo
Elmo TT-02RX Manuale utente
Elmo
Elmo Image Mate 4 Manuale utente
Elmo
Elmo Document Camera P30S Manuale utente
Elmo
Elmo TT-12 Guida all'installazione
Elmo
Elmo P100HD Manuale utente
Elmo
Elmo Visual Presenter HV-110u Manuale utente
Elmo
Elmo TT-X1 Manuale utente
Elmo
Elmo P10S Manuale utente
Elmo
Elmo TT-02S Manuale utente
