Elo TouchSystems ET1509L Manuale utente
User Manual
Elo TouchSystems 1509L Touchmonitor
User Manual – 1509L
SW601532 Rev A - Page 1 of 18
User Manual – 1509L
SW601532 Rev A - Page 2 of 18
Copyright © 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company.
All Rights Reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or
translated into any language or computer language, in any form or by any means, including, but not
limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission
of Tyco Electronics.
Disclaimer
The information in this document is subject to change without notice. Tyco Electronics Corporation and
its Afffiliates in the TE Touch Solutions business unit in the TE Connectivity Ltd. family of companies
(collectively "TE") makes no representations or warranties with respect to the contents herein, and
specifically disclaims any implied warranties of merchantability or fitness for a particular purpose. TE
reserves the right to revise this publication and to make changes from time to time in the content
hereof without obligation of TE to notify any person of such revisions or changes.
Trademark Acknowledgments
Elo TouchSystems, IntelliTouch, TE Connectivity, TE connectivity (logo) and TE (logo) are trademarks
of the TE Connectivity Ltd. family of companies. Windows is a trademark of the Microsoft group of
companies. Other product names mentioned herein may be trademarks or registered trademarks of
their respective companies. Tyco Electronics claims no interest in trademarks other than its own.
User Manual – 1509L
SW601532 Rev A - Page 3 of 18
Table of Contents
Chapter 1 - Introduction ........................................................................... 4
Chapter 2 – Installation............................................................................. 5
Chapter 3 – Mounting................................................................................ 8
Chapter 4 – Operation............................................................................... 9
Chapter 5 – Technical Support............................................................... 13
Chapter 6 – Safety & Maintenance........................................................ 14
Chapter 7 – Regulatory Information..................................................... 15
Chapter 8 – Warranty Information......................................................... 18
User Manual – 1509L
SW601532 Rev A - Page 4 of 18
Chapter 1 - Introduction
Product Description
Your new touchmonitor combines the reliable performance of Elo TouchSystems touch products
with the latest developments in touch technology and display design. This combination of
features creates a natural flow of information between a user and the touchmonitor.
This widescreen touchmonitor incorporates a 24-bit color, active matrix thin-film-transistor LCD
panel to provide high quality display performance. Its LED backlight significantly reduces power
consumption and eliminates mercury (compared to CCFL-backlit panels). Other features that
enhance this LCD monitor’s performance are Plug & Play compatibility, on-screen display
(OSD) controls, and an optional magnetic strip reader (MSR).
Precautions
Follow all warnings, precautions and maintenance as recommended in this user manual to
maximize the life of your unit and prevent risks to user safety. See the Safety & Maintenance
chapter for more information.
This manual contains information that is important for the proper setup and maintenance of the
unit. Before setting up and powering on your new touchmonitor, read through this manual,
especially the Installation, Mounting, and Operation chapters.
Chapter 2 –Installation
Unpacking the Touchmonitor
Open the carton and verify that the following items are present:
Touchmonitor with protective sheet for its face
Elo TouchTools CD & User Manuals CD
Japanese language regulatory information pamphlet
Quick Install Guide
VGA cable
USB cable
AC-DC power adaptor
Connector Panel & Interfaces
Touchmonitor Connections
1. Connect the VGA video cables between the monitor’s VGAinput connectors and your VGA
video source, respectively. Tighten the video cable’s screws for best performance.
2. Connect the USB touch cable between the monitor’s USB connector and your PC’s USB
port.
3. Connect the power adaptor’s input connector to the AC power source. Connect the power
adaptor’s DC output connector to the monitor’s input power jack.
4. The touchmonitor ships in an OFF state. Press the power button to turn it on.
Installing the Touch Technology Software Drivers
Some software installation is required for your touchmonitor to work with your computer.
The drivers for the Windows 7, XP, Vista, WePOS, and 32-bit Server 2003 and 2008 operating
systems are provided with your touchmonitor on a CD.
User Manual – 1509L
SW601532 Rev A - Page 5 of 18
Visit www.elotouch.com for:
The most up-to-date touch driver versions
Additional touch driver information
Detailed touch driver installation guides
Touch drivers for other operating systems
Insert the Elo TouchTools CD into your computer’s CD-ROM drive. The CD should
automatically run the Elo TouchTools application. Select “Install Driver for This computer”:
User Manual – 1509L
SW601532 Rev A - Page 6 of 18
For Windows XP, Vista, Server 2003, Server 2008, and WEPOS installations, install the “USB
Touchscreen Drivers” when prompted:
For Windows 7 installations, check the “Install driver” box under “Elo USB Interfaces – Other
Touchscreens”
After accepting the end-user license agreement, the drivers will finish installing.
Reboot your computer after the install is complete.
User Manual – 1509L
SW601532 Rev A - Page 7 of 18
Chapter 3 – Mounting
General Mounting Information
The OSD text can be rotated through the OSD menu to better suit your mounting orientation.
The holes located on the sides and top of the touchmonitor case are for ventilation. Do not
block, cover, or insert anything inside the ventilation slots.
Rear VESA Mount
A four-hole 75x75mm mounting pattern for M4 screws is provided on the rear of the monitor.
Remove the stand using a Phillips screwdriver to access this mounting interface. The VESA
FDMI-compliant counting is coded: VESA MIS-B, 75, C
User Manual – 1509L
SW601532 Rev A - Page 8 of 18
User Manual – 1509L
SW601532 Rev A - Page 9 of 18
Chapter 4 – Operation
Power
To turn the touchmonitor on or off, press the touchmonitor power button once.
The Power Status LED on the bottom of the touchmonitor functions according to the following
table: TouchMonitor/Computer Module status LED status
OFF OFF
SLEEP PULSING
ON ON
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications on the Elo website
http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the
mouse or pressing a keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the power adapter
when long periods of disuse are planned.
Touch
Your IntelliTouch touchmonitor is factory-calibrated and should not need manual calibration
(unless the input video is not fully scaled to the native resolution, or the touch experience needs
to be calibrated to a specific user).
Video
A display’s native resolution is its width and height measured in number of pixels. Generally, for
best performance, an image displayed on this monitor will look best when your computer’s
output resolution matches this monitor’s native resolution of 1366 x 768.
For computer output resolutions at non-native resolutions, the monitor will scale the video to its
panel’s native resolution. This involves stretching or compressing the input image as needed in
the X- and Y-dimensions to fit the display’s native resolution. An unavoidable byproduct of the
scaling algorithms is a loss of fidelity when the computer’s output video image is scaled by the
monitor to fit the display. This loss of fidelity is most apparent when viewing feature-rich images
at close distances (for example images containing small-font text).
Your touchmonitor will likely not require video adjustments. However, for analog VGA video,
variations in video graphic card outputs may require user adjustments through the OSD to
optimize the quality of the touchmonitor’s displayed image. These adjustments are
“remembered” by the touchmonitor. Also, to reduce the need for adjustments for different video
mode timings, the monitor correctly scales and displays some of the video industry’s most
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Elo TouchSystems Schermo tattile
Elo TouchSystems
Elo TouchSystems Entuitive 1746L Series Manuale utente
Elo TouchSystems
Elo TouchSystems Entuitive 1947L Series Manuale utente
Elo TouchSystems
Elo TouchSystems 1739L Manuale utente
Elo TouchSystems
Elo TouchSystems 3200L Manuale utente
Elo TouchSystems
Elo TouchSystems E700813 Manuale utente
Elo TouchSystems
Elo TouchSystems 1919L Manuale utente
Elo TouchSystems
Elo TouchSystems ET1515L Series Manuale utente
Elo TouchSystems
Elo TouchSystems 1900L Manuale utente
Elo TouchSystems
Elo TouchSystems 2240L Manuale utente
Elo TouchSystems
Elo TouchSystems ET1598L Manuale utente
Elo TouchSystems
Elo TouchSystems Entuitive 1229L Manuale utente
Elo TouchSystems
Elo TouchSystems 2020L Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems 2239L Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems 1537L Manuale utente
Elo TouchSystems
Elo TouchSystems 3200L Manuale utente
Elo TouchSystems
Elo TouchSystems 1739L Manuale utente
Elo TouchSystems
Elo TouchSystems 1529L Manuale utente
Elo TouchSystems
Elo TouchSystems Entuitive ET1229L Series Manuale utente
Elo TouchSystems
Elo TouchSystems 2794L Manuale utente
Elo TouchSystems
Elo TouchSystems 15D1 Manuale utente
