Elprotronic MSP430 Manuale utente

The MSP430 Flash Programmer

Multi-FPA API-DLL User’s Guide

for the USB-MSP430-FPA and MSP-FET430UIF Adapters

Software version 4.5

PM010A05 Rev.22

April-05-2010

Elprotronic Inc.

16 Crossroads Drive

Richmond Hill,

Ontario, L4E-5C9

CANADA

Web site: www.elprotronic.com

E-mail: [email protected]

Fax: 905-780-2414

Voice: 905-780-5789

Disclaimer:

No part of this document may be reproduced without the prior written consent of Elprotronic Inc.

The information in this document is subject to change without notice and does not represent a

commitment on any part of Elprotronic Inc. While the information contained herein is assumed to

be accurate, Elprotronic Inc. assumes no responsibility for any errors or omissions.

In no event shall Elprotronic Inc, its employees or authors of this document be liable for special,

direct, indirect, or consequential damage, losses, costs, charges, claims, demands, claims for lost

profits, fees, or expenses of any nature or kind.

The software described in this document is furnished under a licence and may only be used or copied

in accordance with the terms of such a licence.

Disclaimer of warranties: You agree that Elprotronic Inc. has made no express warranties to You

regarding the software, hardware, firmware and related documentation. The software, hardware,

firmware and related documentation being provided to You “AS IS” without warranty or support

of any kind. Elprotronic Inc. disclaims all warranties with regard to the software, express or implied,

including, without limitation, any implied warranties of fitness for a particular purpose,

merchantability, merchantable quality or noninfringement of third-party rights.

Limit of liability: In no event will Elprotronic Inc. be liable to you for any loss of use, interruption

of business, or any direct, indirect, special incidental or consequential damages of any kind

(including lost profits) regardless of the form of action whether in contract, tort (including

negligence), strict product liability or otherwise, even if Elprotronic Inc. has been advised of the

possibility of such damages.

END USER LICENSE AGREEMENT

PLEASE READ THIS DOCUMENT CAREFULLY BEFORE USING THE SOFTWARE AND

THE ASSOCIATED HARDWARE. ELPROTRONIC INC. AND/OR ITS SUBSIDIARIES

(“ELPROTRONIC”) IS WILLING TO LICENSE THE SOFTWARE TO YOU AS AN

INDIVIDUAL, THE COMPANY, OR LEGAL ENTITY THAT WILL BE USING THE

SOFTWARE (REFERENCED BELOW AS “YOU” OR “YOUR”) ONLY ON THE CONDITION

THAT YOU AGREE TO ALL TERMS OF THIS LICENSE AGREEMENT. THIS IS A LEGAL

AND ENFORCABLE CONTRACT BETWEEN YOU AND ELPROTRONIC. BY OPENING THIS

PACKAGE, BREAKING THE SEAL, CLICKING “I AGREE” BUTTON OR OTHERWISE

INDICATING ASSENT ELECTRONICALLY, OR LOADING THE SOFTWARE YOU AGREE

TO THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO

THESE TERMS AND CONDITIONS, CLICK ON THE “I DO NOT AGREE” BUTTON OR

OTHERWISE INDICATE REFUSAL, MAKE NO FURTHER USE OF THE FULL PRODUCT

AND RETURN IT WITH THE PROOF OF PURCHASE TO THE DEALER FROM WHOM IT

WAS ACQUIRED WITHIN THIRTY (30) DAYS OF PURCHASE AND YOUR MONEY WILL

BE REFUNDED.

1. License.

The software, firmware and related documentation (collectively the “Product”) is the property of

Elprotronic or its licensors and is protected by copyright law. While Elprotronic continues to own

the Product, You will have certain rights to use the Product after Your acceptance of this license.

This license governs any releases, revisions, or enhancements to the Product that Elprotronic may

furnish to You. Your rights and obligations with respect to the use of this Product are as follows:

YOU MAY:

A. use this Product on many computers;

B. make one copy of the software for archival purposes, or copy the software onto the hard disk

of Your computer and retain the original for archival purposes;

C. use the software on a network

YOU MAY NOT:

A. sublicense, reverse engineer, decompile, disassemble, modify, translate, make any attempt

to discover the Source Code of the Product; or create derivative works from the Product;

B. redistribute, in whole or in part, any part of the software component of this Product;

C. use this software with a programming adapter (hardware) that is not a product of

Elprotronic Inc or Texas Instruments Inc.

2. Copyright

All rights, title, and copyrights in and to the Product and any copies of the Product are owned by

Elprotronic. The Product is protected by copyright laws and international treaty provisions.

Therefore, you must treat the Product like any other copyrighted material.

3. Limitation of liability.

In no event shall Elprotronic be liable to you for any loss of use, interruption of business, or any

direct, indirect, special, incidental or consequential damages of any kind (including lost profits)

regardless of the form of action whether in contract, tort (including negligence), strict product

liability or otherwise, even if Elprotronic has been advised of the possibility of such damages.

4. DISCLAIMER OF WARRANTIES.

You agree that Elprotronic has made no express warranties to You regarding the software, hardware,

firmware and related documentation. The software, hardware, firmware and related documentation

being provided to You “AS IS” without warranty or support of any kind. Elprotronic disclaims all

warranties with regard to the software and hardware, express or implied, including, without

limitation, any implied warranties of fitness for a particular purpose, merchantability, merchantable

quality or noninfringement of third-party rights.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital devices,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instruction manual, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one

of more of the following measures:

* Reorient or relocate the receiving antenna

* Increase the separation between the equipment and receiver

* Connect the equipment into an outlet on a circuit different from that to which the receiver is connected

* Consult the dealer or an experienced radio/TV technician for help.

Warning: Changes or modifications not expressly approved by Elprotronic Inc. could void the user’s authority

to operate the equipment.

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference and

(2) this device must accept any interference received,

including interference that may cause undesired

operation.

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations.

Cet appereil numerique de la classe B respecte toutes les exigences du

Reglement sur le material brouilleur du Canada.

Table of Contents

1. Introduction ............................................................. 9

1.1 Using TI’s MSP-FET430UIF adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2. Getting Started .......................................................... 17

2.1SelfTestProgram ................................................ 17

2.2MyMSP430PrgProjects............................................ 19

2.3APIDLLDemoProgram ........................................... 23

3. Example with API DLL ................................................... 29

3.1Example withsingle FPA ......................................... 29

3.2 Example with Multi-FPA API DLL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4. List of the DLL instructions ................................................ 33

4.1Multi-FPAinstructions ............................................ 36

F_Trace_ON.................................................. 36

F_Trace_OFF ................................................. 36

F_OpenInstances .............................................. 37

F_CloseInstances .............................................. 37

F_OpenInstancesAndFPAs, F_OpenInstances_AndFPAs . . . . . . . . . . . . . . 38

F_Set_FPA_index ............................................. 43

F_Get_FPA_index ............................................. 44

F_Check_FPA_index........................................... 44

F_Disable_FPA_index.......................................... 45

F_Enable_FPA_index .......................................... 45

F_LastStatus.................................................. 46

F_Multi_DLLTypeVer.......................................... 46

F_Get_FPA_SN ............................................... 47

4.2Genericinstructions ............................................... 48

F_Check_FPA_access .......................................... 48

F_Initialization................................................ 49

F_API_DLL_Directory ......................................... 50

F_Close_All .................................................. 51

F_GetSetup .................................................. 52

F_ConfigSetup ................................................ 52

F_SetConfig .................................................. 63

F_GetConfig ................................................. 64

F_Set_MCU_Name ............................................ 64

F_Get_Device_Info ............................................ 65

F_DispSetup.................................................. 68

F_ReportMessage, F_ReportMessage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

F_GetReportMessageChar ....................................... 69

F_DLLTypeVer ............................................... 70

F_ConfigFileLoad, F_Config_FileLoad . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

F_Power_Target............................................... 72

F_Reset_Target ............................................... 73

F_Get_Targets_Vcc ............................................ 74

F_Set_fpa_io_state............................................. 74

4.3 Data Buffers access instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

F_ReadCodeFile, F_Read_CodeFile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

F_Get_CodeCS ............................................... 77

F_ReadPasswFile, F_Read_PasswFile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

F_Clr_Code_Buffer ............................................ 78

F_Put_Byte_to_Code_Buffer..................................... 79

F_Get_Byte_from_Code_Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

F_Put_Byte_to_Password_Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

F_Get_Byte_from_Password_Buffer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

F_Put_Byte_to_Buffer .......................................... 82

F_Get_Byte_from_Buffer ....................................... 82

4.4Encapsulatedinstructions........................................... 84

F_AutoProgram ............................................... 84

F_VerifyFuseOrPassword ....................................... 85

F_Memory_Erase.............................................. 86

F_Memory_Blank_Check ....................................... 86

F_Memory_Write.............................................. 87

F_Memory_Verify ............................................. 87

F_Memory_Read .............................................. 88

F_Copy_All_Flash_to_Buffer .................................... 89

F_Restore_JTAG_Security_Fuse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

4.5Sequentialinstructions............................................. 91

F_Open_Target_Device ......................................... 92

F_Close_Target_Device......................................... 93

F_Segment_Erase.............................................. 93

F_Sectors_Blank_Check ........................................ 94

F_Write_Word ................................................ 95

F_Read_Word ................................................ 95

F_Write_Byte................................................. 96

F_Read_Byte ................................................. 97

F_Memory_Write_Data ......................................... 97

F_Memory_Read_Data ......................................... 98

F_Copy_Buffer_to_Flash........................................ 99

F_Copy_Flash_to_Buffer....................................... 100

F_Copy_Buffer_to_RAM ...................................... 101

F_Copy_RAM_to_Buffer ...................................... 101

F_Set_PC_and_RUN .......................................... 102

F_Capture_PC_Addr .......................................... 104

F_Synch_CPU_JTAG ......................................... 104

F_Blow_Fuse ................................................ 105

F_Adj_DCO_Frequency ....................................... 107

F_Test_DCO_Frequency ....................................... 107

4.6 Customized JTAG instruction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

F_init_custom_jtag ........................................... 109

F_custom_jtag_stream ......................................... 109

4.7UART......................................................... 112

F_Custon_Function ........................................... 112

Appendix A .............................................................. 115

FlashPro430 Command Line interpreter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

1. Introduction

The FlashPro430 (USB-MSP430-FPA) or TI’s MSP-FET430UIF adapter can be remotely

controlled from other software applications (Visual C++, Visual Basic etc.) via a DLL library. The

Multi-FPA - allows to remotely control simultaneously up to sixteen Flash Programming Adapters

(USB-MSP430-FPAs) significantly reducing programming speed in production. When the MSP-

FET430UIF adapter is used then the only one adapter can be connected.

Figure 1.1 shows the connections between PC and up to sixteen programming adapters. The

FPAs can be connected to PC USB ports directly or via USB-HUB. Direct connection to the PC is

faster but if the PC does not have required number of USB ports, then USB-HUB can be used. The

USB-HUB should be fast, otherwise speed degradation can be noticed. When the USB hub is used,

then the D-Link’s Model No: DUB-H7, P/N BDUBH7..A2 USB 2.0 HUB is recommended.

Figure 1.1

Block diagram of the Multi-FPA application DLL is presented on the Figure 1.2.

To support this new Multi-FPA API-DLL feature, the software package contains seventeen dll files

- the Multi-FPA API-DLL selector

- sixteen standard single FPAs API-DLLs (or one UIF API-DLL)

Figure 1.3 shows the logical connections between these dll files.

The main Multi-FPA file (FPA-selector - MSP430FPA.DLL) allows to transfer API-DLL functions

coming from application software to desired single application dll (MSP430FPA1.DLL to

MSP430FPA64.DLL or MSPFET430UIF1.DLL).

The MSP430FPA.DLL file is transparent for all API-DLL functions implemented in the single FPA

API-DLLs functions. Desired destination FPA can be selected using the function

F_Set_FPA_index( fpa );

where the

fpa = 1 to 64 when only one desired FPA required to be selected

or fpa = 0 when ALL active FPAs should be selected.

Figure 1.2

Indice

Altri manuali Elprotronic Scheda madre

Elprotronic

Elprotronic FlashPro2000 Manuale utente

Elprotronic

Elprotronic FlashPro-CC Manuale utente

Elprotronic

Elprotronic GangPro430 Manuale utente

Elprotronic

Elprotronic GangPro430 Manuale utente

Manuali Scheda madre popolari di altre marche

DFI

DFI SD170 Manuale utente

ASROCK

ASROCK ROMED8-2T Manuale utente

Asus

Asus P2L97A Manuale utente

Winmate

Winmate IC70 Manuale utente

Asus

Asus MES-B Manuale utente

Grantech

Grantech SYS8F377VGGA-3OMN Manuale utente

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuale utente

Gigabyte

Gigabyte GA-9IVDT Manuale utente

Texas Instruments

Texas Instruments ADS8372EVM Manuale utente

Commell

Commell MS-C73 Manuale utente

IBT Technologies

IBT Technologies MB860 Manuale utente

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuale utente

Biostar

Biostar M7VIT Bravo Istruzioni per l'uso e l'installazione

Intel

Intel D33217CK Manuale utente

Asus

Asus F1A55-M LX PLUS R2.0 Manuale utente

EPC

EPC EPC9147C Manuale utente

Asus

Asus EX-B760M-V5 D4 Manuale utente

EPOX

EPOX MU-8KHA0010 Manuale utente