Installation Instructions
WALLWAVES
SPEAKERS
INSTALLATION
To install the WallWaves speakers, first clean an
area of the drywall to place the speakers within
the top or bottom portion of the Wall Box cutout.
The speakers work best when there are not
obstructions between the wall area and listener
(cabinets, countertops, etc.)
445
17.500
267
10.500
Opening in
Wall Area
Wall Stud
(typical))
Wallboard and Other Surface
Materials, as Applicable
For placement of speakers, attempt a trial run
while the adhesive cover is still applied (The
adhesive on the speakers is for one use only).
The speakers should be a minimum of 5” apart
center to center to make sure the speakers are
not touching each other.
Peel the adhesive lines and stick in place. The
adhesive is time sensitive, the longer the adhesive
tape is applied the stronger the bond. Try to place
the speakers only one time. *To remove, slide a
putty knife and gently wedge the speakers out.
127
5.000
(Minimum
Suggested
Distance)
Cutout Location
Speaker Placement
(Either above or
below cutout)
PROOFERS: CHANGES APPROVED DATE OF APPROVAL
DEBRA WACHTER __________________________________________________ __________________________
Grant Sullivan ____________________________________________________ __________________________
Bruce Hawkins ____________________________________________________ __________________________
