Emerson KEYSTONE F635 Istruzioni per l'installazione

3

12

11

5

6

7

1

8

9

10

2

4

KEYSTONE SLURRY CONTROL VALVES

FIGURE 635

Complete assembly and disassembly instructions for F635 slurry valves

DISASSEMBLY INSTRUCTIONS

1. Remove the valve from the pipeline. The disc should be in the closed position.

2. Disconnect any electric or pneumatic lines and remove the actuator.

3. Clean off all external deposits of slurry by steam cleaning or grit blasting.

4. Remove both gland nuts (12), gland plate (5) and gland collar (6).

5. Remove both gland studs (11) from the valve body (1).

6. Remove the end cover plate (9) and gasket(8).

7. Remove the disc screws (4). For valve sizes DN 50 - 300, there are two only disc screws.

For sizes DN 350 - 500, there are three. With the larger valves it is recommended that you

support the disc.

8. Drive out the shaft (3) using a brass or aluminium dolly from the bottom of the valve.

9. Remove the disc (2).

10. Remove all the old gland packing (7).

11. Thoroughly clean all components and examine them for excessive wear or damage, replacing

them where necessary.

12. Disassembly is now complete and ready for re-assembly. Refer to assembly instructions.

NOTE: DN 50 - 300 valve illustrated.

ASSEMBLY INSTRUCTIONS

1. Fit the graphite gasket (8) to the end cover(9).

2 Fit the end cover (8, 9, 10) to the bottom end of the valve body (1).

3 Pack the valve gland with graphite packing(7).

4 Fit both gland studs (11) after first coating them with anti-seize compound.

5 Fit the disc (2) inside the valve bore, with the disc screw holes uppermost. (For 5 degree angled

seat option only, ensure that the disc is positioned so that the valve will close in the anti-clock

wise direction, looking from the top of the valve.)

6 Fit the gland plate (5) and the gland collar (6) to the shaft (3).

7 Insert the shaft assembly (3, 5 and 6) through the body (1) and disc (2), ensuring that the shaft

and disc screw holes are aligned.

8 Fit and tighten the disc screws (4). For valve sizes DN 50 - 300, there are two only disc screws

for sizes DN 350 - 500, there are three.

9 Check that the disc is free to rotate. (For 5 degree angled seat options, check that the disc is

free to move from the open to the 5 degree closed position).

10. Tighten up the gland nuts (12) ensuring it is not overtightened.

11. Assembly is now complete and ready for installation. Refer to the F635 installation and

commissioning instructions.

12. The gland may need to be adjusted on plant start up.

© 2012 Emerson plc. All Rights Reserved.www.valves.emerson.com VCIOM-02909-EN 15/09

© 2017 Emerson. All rights reserved.

Questo manuale è adatto per i seguenti modelli

1

Indice

Altri manuali Emerson Unità di controllo

Emerson

Emerson Raimondi Manuale utente

Emerson

Emerson Clarkson ZP300 Manuale utente

Emerson

Emerson KTM 2-WAY Manuale

Emerson

Emerson Fisher POSI-SEAL A31A Manuale utente

Emerson

Emerson Asco Bio-Pure Manuale utente

Emerson

Emerson CROSBY STYLE HC ISOFLEX Guida

Emerson

Emerson Fisher ACE95 Series Manuale utente

Emerson

Emerson ALCO Thermo TX6 Manuale utente

Emerson

Emerson FISHER Enardo Rim Vent Manuale utente

Emerson

Emerson EX4-6-...FLR Series Manuale utente

Emerson

Emerson Rosemount Analytical NGA2000 CLD Manuale utente

Emerson

Emerson Bettis XTE3000 Manuale utente

Emerson

Emerson Alco Controls Thermo-TX7 Manuale utente

Emerson

Emerson fisher 6365 Series Manuale utente

Emerson

Emerson Fisher HS Manuale utente

Emerson

Emerson Anderson Greenwood 93 Series Manuale utente

Emerson

Emerson EXD-U01 Manuale utente

Emerson

Emerson Spence Type N6 Manuale utente

Emerson

Emerson Fisher EAD Manuale utente

Emerson

Emerson Spence K3 Manuale utente

Emerson

Emerson fisher EDR Manuale utente

Emerson

Emerson Fisher EZ easy-e Manuale utente

Emerson

Emerson SI-PROFIBUS Manuale utente

Emerson

Emerson Fisher YD Manuale utente

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente