Emerson Rosemount 1408A Manuale utente

Quick Start Guide

00825-0200-4480, Rev AB

September 2021

Rosemount™ 1408A Level and Flow

Transmitter

Non-Contacting Radar

1 About this guide

This Quick Start Guide provides basic guidelines for the Rosemount

1408A Level and Flow Transmitter. Refer to the 1408A Reference

Manual for more instructions.

1.1 Safety messages

WARNING

Failure to follow safe installation and servicing guidelines could

result in death or serious injury.

Ensure the transmitter is installed by qualified personnel and in

accordance with applicable code of practice.

Use the equipment only as specified in this Quick Start Guide and the

Reference Manual. Failure to do so may impair the protection

provided by the equipment.

Repair, e.g. substitution of components, etc. may jeopardize safety

and is under no circumstances allowed.

WARNING

Process leaks could result in death or serious injury.

Handle the transmitter carefully.

Install and tighten process connectors before applying pressure.

Do not attempt to loosen or remove process connectors while the

transmitter is in service.

WARNING

Physical access

Unauthorized personnel may potentially cause significant damage to

and/or misconfiguration of end users’ equipment. This could be

intentional or unintentional and needs to be protected against.

Physical security is an important part of any security program and

fundamental to protecting your system. Restrict physical access by

unauthorized personnel to protect end users’ assets. This is true for all

systems used within the facility.

CAUTION

Hot surfaces

The transmitter and process seal may be hot at high process

temperatures. Allow to cool before servicing.

Note

Be careful not to scratch or otherwise damage the PTFE sealing.

2 Mount transmitter on tank

2.1 Mount the bracket

Procedure

1. Mount the bracket on the wall/ceiling or other flat surface.

T30

2. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

3. Secure the transmitter to the bracket.

Mounting options:

•(A) Antenna extension for open air installations

•(B) Lock nut

A B

46 mm

36 mm

2.1.1 Bracket hole pattern

Figure 2-1: Hole Pattern

0.28 (7)

0.43 (11)

1.97

(50)

Ø 0.28 (7)

30°

Dimensions are in inches (millimeters).

2.2 Mounting onto a threaded connection

Refer to Figure 2-2 for the required thread engagement length at the

customer G1 process connection.

Figure 2-2: Thread Engagement Length

A A

A. 0.35 to 0.63 in. (9 to 16 mm)

2.2.1 Mount on a threaded flange connection

Procedure

1. Place a suitable soft gasket on the tank flange.

2. Place the flange over the gasket.

3. Tighten the bolts and nuts with sufficient torque for the flange

and gasket choice.

0.75 in. (19 mm)

4. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

5. Mount the transmitter on the tank.

39 mm

Torque 310 in-lb (35 N-m)

2.2.2 Mount the threaded adapter version

Procedure

1. Apply anti-seize paste or PTFE tape on outer threads according

to your site procedures.

2. Mount the threaded adapter on the tank.

41 mm

3. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

4. Mount the transmitter on the tank.

39 mm

Torque 310 in-lb (35 N-m)

2.2.3 Mount on a threaded connection

Procedure

1. Apply lubricating paste on the transmitter thread.

Note

The paste must be approved for the application and

compatible with the elastomers used.

2. Mount the transmitter on the tank.

39 mm

Torque 310 in-lb (35 N-m)

Altri manuali per Rosemount 1408A

Indice

Altri manuali Emerson Trasmettitore

Emerson

Emerson Incus GDU-01-TT Manuale utente

Emerson

Emerson Rosemount 3144P Manuale utente

Emerson

Emerson Rosemount 248 Manuale utente

Emerson

Emerson Rosemount 2051CF series Manuale utente

Emerson

Emerson Rosemount 56 Manuale utente

Emerson

Emerson Rosemount 8732EM Manuale utente

Emerson

Emerson Micro Motion 2400S Manuale utente

Emerson

Emerson Rosemount 5408 Manuale utente

Emerson

Emerson Rosemount MultiVariable 3051SMV Manuale utente

Emerson

Emerson Rosemount 2051 Wireless Series Manuale utente

Emerson

Emerson Rosemount 248 Manuale utente

Emerson

Emerson Rosemount 2088 Manuale utente

Emerson

Emerson Rosemount 326L Manuale utente

Emerson

Emerson Rosemount 1057 Manuale utente

Emerson

Emerson wirelessHART Rosemount Series Manuale utente

Emerson

Emerson Micro Motion Manuale utente

Emerson

Emerson Micro Motion 4700 Manuale utente

Emerson

Emerson Rosemount 5408 Manuale utente

Emerson

Emerson Rosemount 2090P Manuale utente

Emerson

Emerson Rosemount 3095 Manuale utente

Emerson

Emerson Rosemount 8712C Guida alla configurazione

Emerson

Emerson Rosemount 248 Manuale utente

Emerson

Emerson Rosemount 3051 Manuale utente

Emerson

Emerson Rosemount 3051 Manuale utente

Manuali Trasmettitore popolari di altre marche

NIVELCO

NIVELCO EasyTREK SCA-300 Series Manuale del proprietario

Honeywell

Honeywell 5816WMBR Manuale utente

Kamstrup

Kamstrup READy MTU Istruzioni operative

Omega

Omega ZW Series Manuale utente

ABB

ABB Field 264H Guida

Alinco

Alinco DJ-V17T Manuale utente

Dejero

Dejero EnGo 3x Manuale utente

Rosemount

Rosemount 4600 Manuale utente

Speaka Professional

Speaka Professional 2342740 Manuale utente

trubomat

trubomat GAB 1000 Manuale utente

Teledyne Analytical Instruments

Teledyne Analytical Instruments LXT-380 Manuale utente

Rondish

Rondish UT-11 Manuale utente

MG 10JRE Manuale utente

Burkert

Burkert 8177 Manuale utente

Firetide

Firetide HotPort 3203 Manuale

Tele Radio

Tele Radio T9-02 Manuale utente

Rotronic

Rotronic HygroFlex HF3 Series Manuale utente

Jamara

Jamara FCX6 Pro Tel Manuale utente