ENCAD 215319-1 Manuale utente

CADJET

Wide Format Inkjet Printer

User Guide

Text P/N 215319-1 Rev. B

NOVAJET®, ENCAD®, CADJET®, NovaXsell™, Posterizer™, Extreme Color

Printing™ and Quality Imaging Supplies™ are trademarks of ENCAD, Inc.

Other trademarks are the property of their respective owners.

Except as provided below, no part of this manual may be copied or distributed,

transmitted, transcribed, stored in a retrieval system, or translated in any human

or computing language, in any form or by any means, electronic, mechanical,

magnetic or otherwise, or disclosed to a third party without the express written

permission of ENCAD, Inc., 6059 Cornerstone Court West, San Diego, CA

92121, U.S.A.

Certain manuals are distributed by ENCAD in an electronic format on CD-ROM

or over the internet. The registered user of an ENCAD product whose manuals

is distributed in this fashion may print one copy for their personal use only.

Revision History

Rev.A March 2000

Rev. B April 2000

CADJET®3D User Guide

WARRANTY CLAIMS

United States

ENCAD®, Inc., warrants its printers (“PRODUCT”) to be free from defects in workmanship and

materials for a period of one year from the date of purchase. In order to submit a Warranty claim,

please contact the ENCAD Help Desk at (858) 452-4350.

ENCAD reserves the right to make changes or improvements to Products, without incurring any

obligation to similarly alter Products previously purchased.

Buyer’s sole and exclusive rights pursuant to this Warranty shall be for the repair or replacement

of defective Product. ENCAD specifically disclaims any and all other warranties, expressed or

implied, including but not limited to, implied warranties of merchantability and fitness for a

particular purpose. In no event shall ENCAD be liable for any loss of profit or other commercial

damages, special, incidental or consequential damages, or any other damages or claims, whatso-

ever.

This Warranty gives Buyer specific legal rights, and Buyer may also have other rights that vary

from state to state.

This Warranty applies only to printers purchased from ENCAD, or authorized ENCAD distribu-

tors or dealers. The intent of this Warranty is to repair or replace defective Products subjected to

normal wear and tear, when operated according to ENCAD instructions.

This warranty does not cover damage to the Product resulting from the following:

·Accident or negligence.

·Unauthorized modification of the Product.

·Adverse environmental conditions.

·Service of the Product by other than an ENCAD authorized service provider.

·Unauthorized or improper use, including but not limited to:

-Use in applications for which the Product was not designed.

-Using cartridges, ink, or media other than ENCAD QIS products.

-Lubricating any part of the printer.

Internationally: Contact your reseller for warranty information.

Extended Warranty: An extended warranty is available for your printer. For information in the

U.S., call 1-800-45ENCAD. Internationally, contact your reseller for further information.

iii

CADJET®3D User Guide

FCC Statement (U.S.A.)

The United States Federal Communications Commission has specified that the following notice be

brought to the attention of users of the ENCAD printers.

FEDERAL COMMUNICATIONS COMMISSION RADIO AND TELEVISION INTERFER-

ENCE FOR CLASS A DEVICE

Statement

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications.

User Instructions:

If the equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment on and off, the user is encouraged to try to correct the

interference by one of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

•Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by ENCAD, Inc. could void the user’s authority

to operate the equipment.

Note: This product was FCC certified under test conditions that included the use of shielded I/O

cables and connectors between system components. To be in compliance with FCC regulations,

the user must use shielded cables and connectors and install them properly.

CADJET®3D User Guide

VDE statement

Hiermit wird bescheinigt, daß der Drucker in Übereinstimmung mit den Bestimmungen der

BMPT-AmstbIVfg 234/1991 funkentstört ist. Der vorschriftsmäßige Betrieb mancher Geräte

(z.B. Meßsender) kann allerdings gewissen Einschränkungen unterliegen. Beachten Sie deshalb

die Hinweise in der Bedienungsanleitung.

Dem Zentralamt für Zulassungen im Fernmeldewesen würde den Inverkehrbringen dieses Gerätes

angezeigt und die Berechtigung zur Überprüfung der Serie auf die Einhaltung der Bestimmungen

eingeräumt.

Industry Canada

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing

Equipment Regulations.

Cet apparell numérique de la classe A respecte toutes les exigences du Réglement sur le matériel

brouilleur du Canada.

Material safety data sheet

To obtain information on the proper use, handling, and disposal of any ENCAD QIS ink,

consult the material safety data sheet included in the ink kit or obtain a copy from

ENCAD, Inc. at:

6059 Cornerstone Court West

San Diego, California 92121-3734

(858) 452-4350

International users should contact their local reseller.

CADJET®3D User Guide

General operating safety

The use of a <HAR> cord set (rated 10A, 250VAC) with the proper plug configuration

for the country where the device will be used, is required for continued safety compli-

ance.

Ein harmonisiertes (<HAR>) Netzkabel (min. 10A, 250V~) mit dem vorgeschriebenen

Netzstecker für das entsprechende Land in dem das Gerät installiert wird, ist unbedingt

notwendig für die elektrische Sicherheit.

El uso de cable poder <marcado HAR> (capacidad de 10A, 250V~), con el enchufe

apropiado para el país donde se use el producto, es requerido para acatamiento de

seguridad eléctrica.

L' emploi d' un cordon surmoulé <HAR> (estimé 10A, 250V CA) avec la configuration

de la fiche convenable pour le pays où l' appareil sera utilisé, est exigé pour la

conformité à la sécurité continuée.

Manual conventions

➪Indicates a procedure for you to follow in order to perform a specific function.

Read the accompanying explanatory text before following the step-by-step

procedure.

!Indicates a warning. Ignoring the warning can damage the printer or result in an

unsatisfactorily printed image.

✓Indicates a tip or suggestion that can make using the printer easier or improve

your printed images.

CADJET®3D User Guide

Other reference materials

In addition to this guide, the following additional documentation is included with your

printer:

Quick Start Guide - Tells you how to assemble and install the printer's hardware.

TwoCD-ROMs

One CD-ROM contains sample images.

The other CD-ROM contains:

•this guide;

•Maintenance Guide, instructions for maintaining your printer;

•V/R Xpress driver;

•Heidi driver;

•ADI driver; and

•print server software.

vii

CADJET®3D User Guide

Contents

Introduction ............................................................ 1-1

Printing .....................................................................................1-1

Obtaining quality results .............................................................1-2

Caring for your ink and cartridges ................................................1-3

Nine Factors that Affect Print Quality ...........................................1-4

Printer options ........................................................ 2-1

Returning to the default settings ..................................................2-1

Printing the settings ...................................................................2-1

Choosing print mode options .......................................................2-1

Important notes about image size vs. dpi......................................2-2

Color mode................................................................................2-3

Quality modes ...........................................................................2-3

Choosing feed media options ......................................................2-4

End of media .............................................................................2-4

Media counter............................................................................2-5

Choosing paper options ..............................................................2-6

Supply Type ..............................................................................2-6

Media standard ..........................................................................2-7

Margins ................................................................................... 2-10

Auto-Load Delay ...................................................................... 2-11

Auto-Cut ................................................................................. 2-11

Save Media ............................................................................. 2-11

Auto-Wipe ............................................................................... 2-12

Defining user setup .................................................................. 2-12

Choosing a language ................................................................ 2-13

Choosing ink options ................................................................ 2-13

Printer Default Settings ............................................................. 2-16

Printing ................................................................... 3-1

ENCAD V/R Xpress driver ...........................................................3-1

Heidi driver ................................................................................3-8

ADI driver ................................................................................ 3-12

viii

CADJET®3D User Guide

HPGL/2.................................................................... 4-1

CAD printing modes ...................................................................4-1

Printing vector data ....................................................................4-1

Accessing HPGL/2 features ........................................................4-2

Palette select ............................................................................4-2

Control ......................................................................................4-3

Rotation ....................................................................................4-4

Reprints ....................................................................................4-4

Nesting .....................................................................................4-5

Nest wait time ...........................................................................4-6

Ink limit .....................................................................................4-7

HPGL/2 Test File .......................................................................4-7

Installing additional memory ..................................A-1

Acceptable SIMM sizes ............................................................. A-1

SIMM installation ...................................................................... A-1

Serial Communications and Cabling.......................B-1

RS-422 cable requirements ........................................................ B-1

Setting serial communications parameters .................................. B-2

Setting the baud rate................................................................. B-2

Setting the parity bit .................................................................. B-2

Menu tree ................................................................C-1

Main menu at a glance .............................................................. C-1

Main menu ............................................................................... C-2

Feed media menu ..................................................................... C-3

Setup menu at a glance............................................................. C-4

Setup menu.............................................................................. C-5

Utility menu at a glance............................................................C-10

Utility menu .............................................................................C-11

Calibration Menu ......................................................................C-12

Service Menu...........................................................................C-13

Technical information .............................................D-1

Error messages....................................................... E-1

Error Messages ........................................................................ E-1

Cartridge Errors ........................................................................ E-1

CADJET®3D User Guide

Troubleshooting ...................................................... F-1

Troubleshooting quick list ...........................................................F-1

Isolating problems ......................................................................F-1

Printer Health ............................................................................F-2

Data Transfer ...........................................................................F-12

Application Software.................................................................F-15

Calling for Help ........................................................................F-17

Customer Technical Support .....................................................F-17

Introduction 1

This User Guide provides complete information on the CADJET®3D printer.

The printer is a wide-format color inkjet printer that gives you professional-quality output

with all the brilliance and gloss of liquid ink. For CAD, engineering, architectural, creative

and business professionals, this printer lets you experience the value of exceptional

graphics quality and cut hours of production time, while giving you the dramatic impact of

high fidelity images.

Printing

Wide format inkjet printers let you create printed pieces the length of a roll of media (up to

300'). Only Extreme Color Printing™ combines the technical sophistication of the

CADJET printer with the unique qualities of ENCAD CIS ink and media.

Your printer features a continuous-feeding ink system which uses 500ml reservoirs for

each color, so you never have to worry about running out of ink halfway through a big

print job. Before starting a print job, just look at the transparent plastic reservoirs to

check the ink supply. When the ink supply is low, just open the cap and refill.

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Stampante popolari di altre marche

Lexmark

Lexmark 1400 Series Manuale

Canon

Canon i70 Series Manuale utente

Evolis

Evolis Elypso Manuale utente

Kyocera

Kyocera FS-9530DN Manuale utente

Canon

Canon LASER SHOT LBP-1210 Manuale utente

Samsung

Samsung BIXOLON SRP-350plusF Manuale utente

Canon

Canon PIXMA PRO-1 Series Manuale utente

Canon

Canon PIXMA G3560 Guida all'installazione

Dell

Dell Color Laser Printer 2130cn Manuale utente

Tektronix

Tektronix Phaser 840 Manuale utente

Epson

Epson ET-7750 Istruzioni operative

Canon

Canon CLBR 460ps Manuale utente

Eltron

Eltron P210 Guide Manuale utente

Ricoh

Ricoh MD-P1 Manuale utente

Epson

Epson SC-F7100 series Manuale utente

Epson

Epson Stylus C40UX Manuale utente

Canon

Canon imagePASS-A2 Manuale utente

Canon

Canon S820D Manuale utente