Endress+Hauser Turbimax CUS71D Manuale utente

Products Solutions Services

Operating Instructions

Turbimax CUS71D

Ultrasonic interface sensor

BA00490C/07/EN/06.18

71415440

2018-05-01

Turbimax CUS71D Table of contents

Endress+Hauser 3

Table of contents

1 About this document ........... 4

1.1 Warnings ........................... 4

1.2 Symbols used ........................ 4

2 Basic safety instructions ....... 5

2.1 Requirements for personnel ........... 5

2.2 Designated use ...................... 5

2.3 Workplace safety .................... 6

2.4 Operational safety ................... 7

2.5 Product safety ....................... 7

2.6 IT security .......................... 7

3 Product description ............. 8

3.1 Product design ....................... 8

4 Incoming acceptance and

product identification .......... 8

4.1 Incoming acceptance ................. 8

4.2 Product identification ................. 9

4.3 Scope of delivery ..................... 9

4.4 Certificates and approvals ............ 10

5 Installation .................... 11

5.1 Installation conditions ............... 11

5.2 Mounting the sensor ................ 14

5.3 Post-installation check ............... 17

6 Electrical connection .......... 17

6.1 Connecting the sensor ............... 17

6.2 Post-connection check ............... 20

7 Commissioning ................ 20

7.1 Preparatory steps ................... 20

8 Operation ...................... 20

8.1 Sensor monitoring .................. 20

8.2 Cyclic cleaning ...................... 21

8.3 Automatic wiper function ............ 21

9 Diagnostics and

troubleshooting ............... 21

9.1 General troubleshooting ............. 21

10 Maintenance .................. 22

10.1 Maintenance tasks .................. 22

11 Repairs ......................... 23

11.1 General notes ...................... 23

11.2 Spare parts ........................ 23

11.3 Return ............................ 23

11.4 Disposal ........................... 24

12 Accessories .................... 25

12.1 Assemblies ........................ 25

12.2 Holder ............................ 26

12.3 Cable extension ..................... 27

13 Technical data ................. 27

13.1 Input .............................. 27

13.2 Performance characteristics .......... 27

13.3 Environment ....................... 28

13.4 Process ............................ 28

13.5 Mechanical construction ............. 28

Index ................................. 29

About this document Turbimax CUS71D

4 Endress+Hauser

1 About this document

1.1 Warnings

Structure of information Meaning

LDANGER

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation will result in a fatal or serious injury.

LWARNING

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid the dangerous situation can result in a fatal or serious injury.

LCAUTION

Causes (/consequences)

If necessary, Consequences of non-

compliance (if applicable)

‣Corrective action

This symbol alerts you to a dangerous situation.

Failure to avoid this situation can result in minor or more serious injuries.

NOTICE

Cause/situation

If necessary, Consequences of non-

compliance (if applicable)

‣Action/note

This symbol alerts you to situations which may result in damage to property.

1.2 Symbols used

Symbol Meaning

Additional information, tips

Permitted or recommended

Not permitted or not recommended

Reference to device documentation

Reference to page

Reference to graphic

 Result of a step

Turbimax CUS71D Basic safety instructions

Endress+Hauser 5

1.2.1 Symbols on the device

Symbol Meaning

Reference to device documentation

2 Basic safety instructions

2.1 Requirements for personnel

• Installation, commissioning, operation and maintenance of the measuring system may be

carried out only by specially trained technical personnel.

• The technical personnel must be authorized by the plant operator to carry out the specified

activities.

• The electrical connection may be performed only by an electrical technician.

• The technical personnel must have read and understood these Operating Instructions and

must follow the instructions contained therein.

• Faults at the measuring point may only be rectified by authorized and specially trained

personnel.

Repairs not described in the Operating Instructions provided must be carried out only

directly at the manufacturer's site or by the service organization.

2.2 Designated use

CUS71D is a sensor designed for interface measurement in water and wastewater.

The sensor is particularly suited for use in the following applications:

• Wastewater treatment: primary clarifier, sludge thickener, secondary clarifier

• Water treatment: sedimentation tank after flocculant dosage, sludge height in contact

sludge processes

• Static separation processes: with/without slow stirring and without introduction of air

Use of the device for any purpose other than that described, poses a threat to the safety of

people and of the entire measuring system and is therefore not permitted.

The manufacturer is not liable for damage caused by improper or non-designated use.

NOTICE

Applications outside specifications!

Incorrect measurements, malfunctions and even measuring point failure could result

‣Use the product only in accordance with the specifications.

‣Pay attention to the technical data on the nameplate.

Basic safety instructions Turbimax CUS71D

6 Endress+Hauser

2.3 Workplace safety

As the user, you are responsible for complying with the following safety conditions:

• Installation guidelines

• Local standards and regulations

Electromagnetic compatibility

• The product has been tested for electromagnetic compatibility in accordance with the

applicable European standards for industrial applications.

• The electromagnetic compatibility indicated applies only to a product that has been

connected in accordance with these Operating Instructions.

Turbimax CUS71D Basic safety instructions

Endress+Hauser 7

2.4 Operational safety

Before commissioning the entire measuring point:

1. Verify that all connections are correct.

2. Ensure that electrical cables and hose connections are undamaged.

3. Do not operate damaged products, and protect them against unintentional operation.

4. Label damaged products as defective.

During operation:

‣If faults cannot be rectified:

products must be taken out of service and protected against unintentional operation.

2.5 Product safety

The product is designed to meet state-of-the-art safety requirements, has been tested, and

left the factory in a condition in which it is safe to operate. The relevant regulations and

European standards have been observed.

2.6 IT security

We only provide a warranty if the device is installed and used as described in the Operating

Instructions. The device is equipped with security mechanisms to protect it against any

inadvertent changes to the device settings.

IT security measures in line with operators' security standards and designed to provide

additional protection for the device and device data transfer must be implemented by the

operators themselves.

Product description Turbimax CUS71D

8 Endress+Hauser

3 Product description

3.1 Product design

The sensor is designed for continuous in-situ determination of interfaces.

The sensor includes all necessary modules:

• Power supply

• The ultrasonic source emits the measurement signals.

• The ultrasonic receiver receives the measurement signals, digitalizes the signals and

converts them to a measurement value.

• The sensor microcontroller controls the internal operations and data transmission.

The preconfigured sensor can be used at a measuring point.

3.1.1 Measuring principle

A piezoelectric crystal is enclosed in a flat cylindrical plastic housing. When the crystal is

excited by an electrical voltage, it generates a sonar signal. This causes ultrasonic waves to be

transmitted at a frequency of approx. 650 kHz and at an angle of 6° to scan the separation

zones.

The measured variable is the time the transmitted ultrasonic signal needs to reach the solid

particles in the separation zone and return to the receiver. The separation zone is computed

after the maximum slope and the maximum signal amplitude.

A sensor version featuring a wiper is available to reliably avoid the buildup of deposit on the

sensor membrane.

4 Incoming acceptance and product identification

4.1 Incoming acceptance

1. Verify that the packaging is undamaged.

 Notify the supplier of any damage to the packaging.

Keep the damaged packaging until the issue has been resolved.

2. Verify that the contents are undamaged.

 Notify the supplier of any damage to the delivery contents.

Keep the damaged goods until the issue has been resolved.

3. Check that the delivery is complete and nothing is missing.

 Compare the shipping documents with your order.

4. Pack the product for storage and transportation in such a way that it is protected

against impact and moisture.

 The original packaging offers the best protection.

Make sure to comply with the permitted ambient conditions.

If you have any questions, please contact your supplier or your local Sales Center.

Turbimax CUS71D Incoming acceptance and product identification

Endress+Hauser 9

4.2 Product identification

4.2.1 Nameplate

The nameplate provides you with the following information on your device:

• Manufacturer identification

• Order code

• Extended order code

• Serial number

• Ambient and process conditions

• Safety information and warnings

‣Compare the information on the nameplate with the order.

4.2.2 Product identification

Interpreting the order code

The order code and serial number of your product can be found in the following locations:

• On the nameplate

• In the delivery papers

Obtaining information on the product

1. Go to www.endress.com.

2. Call up the site search (magnifying glass).

3. Enter a valid serial number.

4. Search.

 The product structure is displayed in a popup window.

5. Click on the product image in the popup window.

 A new window (Device Viewer) opens. All of the information relating to your

device is displayed in this window as well as the product documentation.

Manufacturer address

Endress+Hauser Conducta GmbH+Co. KG

Dieselstraße 24

D-70839 Gerlingen

4.3 Scope of delivery

The delivery comprises:

• 1 Turbimax CUS71D sensor, version as ordered

• 1 set of Operating Instructions BA00490C/07/EN

‣If you have any queries:

Please contact your supplier or local sales center.

Incoming acceptance and product identification Turbimax CUS71D

10 Endress+Hauser

4.4 Certificates and approvals

4.4.1  mark

The product meets the requirements of the harmonized European standards. As such, it

complies with the legal specifications of the EU directives. The manufacturer confirms

successful testing of the product by affixing to it the  mark.

4.4.2 EAC

The product has been certified according to guidelines TP TC 004/2011 and TP TC 020/2011

which apply in the European Economic Area (EEA). The EAC conformity mark is affixed to the

product.

4.4.3 Electromagnetic compatibility

Interference emission and interference immunity: Industrial environment as per

• EN 61326-1:2013

• EN 61326-2-3:2013

• NAMUR NE21: 2012

Altri manuali per Turbimax CUS71D

Indice

Altri manuali Endress+Hauser Accessori

Endress+Hauser

Endress+Hauser Oxymax H COS21 Manuale utente

Endress+Hauser

Endress+Hauser Memosens COS81E Specifiche tecniche

Endress+Hauser

Endress+Hauser Solitrend MMP42 Specifiche tecniche

Endress+Hauser

Endress+Hauser Soliwave FQR56 Manuale utente

Endress+Hauser

Endress+Hauser NAR 300 Manuale utente

Endress+Hauser

Endress+Hauser Proline Promag 50 Manuale utente

Endress+Hauser

Endress+Hauser Memosens COL37E Manuale utente

Endress+Hauser

Endress+Hauser Proline 100 Modbus RS485 Specifiche tecniche

Endress+Hauser

Endress+Hauser CUS 5 Manuale utente

Endress+Hauser

Endress+Hauser OxyMax W COS 41 Manuale utente

Endress+Hauser

Endress+Hauser OUSAF11 Manuale utente

Endress+Hauser

Endress+Hauser Ceramax CPS341D Manuale utente

Endress+Hauser

Endress+Hauser CCS240 Manuale utente

Endress+Hauser

Endress+Hauser CLS15D Manuale utente

Endress+Hauser

Endress+Hauser Oxymax COS61 Manuale

Endress+Hauser

Endress+Hauser Condumax CLS15 Manuale utente

Endress+Hauser

Endress+Hauser Turbimax CUS50D Manuale utente

Endress+Hauser

Endress+Hauser Viomax CAS51D Manuale utente

Endress+Hauser

Endress+Hauser Dipfit W CLA111 Manuale utente

Endress+Hauser

Endress+Hauser Deltapilot M FMB50 Manuale

Endress+Hauser

Endress+Hauser Proline 800 Specifiche tecniche

Endress+Hauser

Endress+Hauser Prosonic S Series Manuale

Endress+Hauser

Endress+Hauser OUSAF44 Manuale utente

Endress+Hauser

Endress+Hauser Turbimax CUS51D Manuale utente

Manuali Accessori popolari di altre marche

Hillco

Hillco 2810 Manuale utente

Siemens

Siemens QSA2700D Manuale dell'operatore

Contours

Contours ZY024 Manuale utente

Saivod

Saivod VS621 Manuale utente

Virtuox

Virtuox VirtuCLEAN 2.0 Manuale utente

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Manuale utente

Z-Wave

Z-Wave HSD-200Z Manuale utente

turck

turck FMX-IM-2UPLI63FX Manuale utente

Decagon Devices

Decagon Devices 10HS Manuale utente

UPPAbaby

UPPAbaby Cup Holder Manuale utente

Elko

Elko SmartSensor Leakage Wireless Manuale utente

Grizzly

Grizzly H8371 Manuale utente

Panasonic

Panasonic HG-T Series Manuale utente

IFM Electronic

IFM Electronic Efector 250 Series Guida di riferimento

DigiDesign

DigiDesign 888/24 I/O Manuale utente

PROZIS

PROZIS QUAY Manuale utente

patagonia

patagonia PSI Vest Manuale utente

SFC Energy

SFC Energy EFOY GO! Manuale utente