Eneo RJT-1000SFP Manuale utente
EN
Quick Installation Guide
RJ45- SFP Transceiver Modul,
1000Base-T, 0°~ +70°C
RJT-1000SFP
Please follow the following step
Installation step
1
1000BASE-T copper SFP transceiver
Feature
Up to 1.25Gb/s bi-directional data links ;
Hot-pluggable SFP footprint ;
Extended case temperature range (0°C to +70°C );
Fully metallic enclosure for low EMI;
Low power dissipation (1.05 W typical);
Compact RJ45 connector assembly;
Access to physical layer IC via 2-wire serial bus;
1000 BASE-T operation in host systems with SERDES interface.
10/100/1000Mbps compliant in host systems with SGMII interface
Board diagram
Please check the following items before installation. If any missing, please contact the dealer.
1pc
User manual
1000BASE-T copper SFP transceiver
1 Plug l module into SFP socket;
2 Check if the installation is correct and device is good, make sure all the connection is
reliable and power up the system;
3)Make sure the optical communication is normal.
) the
)
The Copper Small Form Pluggable (SFP) transceivers is high performance, cost effective module
compliant with the Gigabit Ethernet and 1000- BASE-T standards as specified in IEEE 802. 3-2002 and
IEEE 802.3ab, which supporting 1000Mbps data- rate up to 100 meters reach over unshielded twisted-
pair CAT 5 cable. The module supports1000 Mbps (or 10/100/1000Mbps) full duplex data-links with 5-
level Pulse Amplitude Modulation (PAM) signals.
2
连接接口
Specification
Product are subject to change without prior notice
Trouble Shooting
1000BASE-T copper SFP transceiver
Please confirm if the installation is correct;
Please confirm the module plugged is match with the requirement;
Please find the following solution when the device doesn't work
Item
Description
Power
Power Supply
The Host Power Supply
Voltage Range
DC 3.15V～3.45V
Consumption
1W
SFP
Connector
SFP slot
Port
1000BASE-X
Copper
Connector
RJ45
Port
1000BASE-T
Protection
ESD
1a contact discharge 3 level
1b air discharge 3 level
Per: IEC61000-4-2
Environmental
Working Temperature
0℃ -70℃
Storage Temperature
Humidity (Non-condensing)
0~95%
Mechanical
Dimension（L×W×H）
55.4mm×13.7mm×8.5mm
Material
Stainless Steel
Color
White
Weight
17g
0℃ -70℃
eneo® is a registered trademark of
VIDEOR E. Hartig GmbH
Exclusive distribution through specialised
trade channels only.
VIDEOR E. Hartig GmbH
Carl-Zeiss-Straße 8
63322 Rödermark/Germany
Tel. +49 (0) 6074 / 888-0
Fax +49 (0) 6074 / 888-100
www.videor.com
www.eneo-security.com
Technical changes reserved
© Copyright by VIDEOR E. Hartig
GmbH Version 03/2018
Indice
Altri manuali Eneo Unità di controllo
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
