EPAX X1 Manuale utente
Read the User Manual before operating the product, and keep it at a convenient place near the printer.
www.epax3d.com
It is strongly recommended that you watch our tutorial videos before
operating your printer for the first time.
For additional instructions, videos, and resources, please visit www.epax3d.com and visit the
Support section.
Contents
Technical Specifications…………………………………………………………………………
Touchscreen Menu Structure…………………………………………………………………...
Slicing Software - ChiTuBox…………………………………………………………………….
Machine Settings…………………………………………………………………………
Print Settings……………………………………………………………………………..
Slicer Operations………………………………………………………………………....
First Printing……………………………………………………………………………………....
Post-Printing Treatment………………………………………………………………………….
Troubleshooting………………………………………………………………………………….
Warnings…………………………………………………………………………………………..
2
3
4
5
11
12
15
17
18
19
1
www.epax3d.com
1. Technical Specifications
2
www.epax3d.com
2. Touchscreen Menu Structure
3
www.epax3d.com
3. Slicing Software - ChiTuBox
Installation
For the latest slicer download, please visit: https://www.chitubox.com/download.html
Slicer Settings
The settings for your printer can be found online at:
https://epax3d.com/pages/slicer-settings-chitubox
Latest ChiTuBox also has settings pre-configured for some models. See below example.
The settings include the Machine Settings (machine volume size, resolution, etc.) as well as basic Print
Settings (print layer height, bottom layers, bottom exposure time and regular exposure time, etc.) for
resin under average printing conditions. If your model is not shown up in ChiTuBox’s presets, you
can create a generic profile and enter the values yourself. Below are the settings for your
reference.
4
www.epax3d.com
Machine Settings
X1/X1-N and X1-DJ/X1-N-DJ with 5.5” 2K COLOR:
X1-K with 6” 2K MONO:
X10-2Kcolor with 10.1” 2K COLOR:
5
www.epax3d.com
X10-4Kmono with 8.9” 4K MONO:
X133-4Kmono with 13.3” 4K MONO:
X156-4Kcolor with 15.6” 4K Color:
6
www.epax3d.com
X156-4Kmono-14 with 14” Mono:
X156 with 13.3” Mono:
Please use X133’s settings for this scenario.
Resin settings are very different between color screen and mono screen. In general, a mono
screen only needs 1/4th of a color screen’s normal exposure time. Below are settings for EPAX
hard resin.
EPAX hard resin settings for EPAX X1/X1-N/X1-DJ/X1-N-DJ color screen:
7
www.epax3d.com
EPAX hard resin settings for EPAX X1-K 2K mono screen:
EPAX hard resin settings for EPAX X10 2K color screen:
8
www.epax3d.com
EPAX hard resin settings for EPAX X10 4K mono screen:
EPAX hard resin settings for EPAX X133 4K mono screen:
9
Altri manuali per X1
1
Questo manuale è adatto per i seguenti modelli
4
Indice
Altri manuali EPAX Stampante 3D
