EPH Controls COMBIPACK4 Istruzioni operative
Installation and Operation Guide
COMBIPACK4
12
16
20
RFRP-OT Room Thermostat
5
Installation Instructions
6
Factory Default Settings
6
7
Specications
8
How your programmable thermostat works
9
14
19
RF1A Wireless Receiver
RFRP-OT Room Thermostat
19
Installation Instructions
Operating Instructions
13
18
17
21
Table of contents
Frost Protection
Mounting & Installation
Mounting & Installation
Resetting the thermostat
Keypad lock and unlock
Setting the date, time and programming mode
Specications & Wiring
Button Description
LCD Symbol Description
Factory Program Setting
31
36
34
30
36
Installer menu
31
31
37
22
37
37
23
24
25
25
26
27
28
Frost Protection
Frost Protection
28
29
TPI
PO 2 Setting high & low limits
PO 3 Hysteresis H On and H O
Optimum Start
Normal
PO 1 Operating Mode
Adjust the program setting in 5/2 Day mode
Copy Function
Temporary Override
Permanent Override
Boost Function
Holiday Function
Battery low warning
Backlight mode selection
Replacing the batteries
PO 4 Calibrate the thermostat
Programming Modes
PO 5 Frost Protection
PO 6 Exit
48
RFRP-OT Room Thermostat (Continued)
Installer menu - OpenTherm
38
PO 6 Setting DHW temperature
39
40
PO 8 DHOP
40
43
PO 9 Set OpenTherm® parameters
Controlling an OpenTherm Boiler with multiple CombiPack 4-OT
42
46
50
52
RF1A Wireless Receiver
Operating Instructions
49
51
Table of contents (Continued)
PO 7 OpenTherm® Information
Exit
System Architecture
LED Description
To disconnect the RFRP-OT thermostat to an RF1A-OT receiver
Button / LED Description
To connect the RFRP-OT thermostat to an RF1A-OT receiver
5
RFRP-OT Room Thermostat
Installation Instructions
6RFRP-OT Room Thermostat CombiPack4
RFRP-OT Room Thermostat
Factory Default Settings
Temperature indicator: ˚C
Switching dierential: 0.4˚C
In built frost protection: 5˚C - Not adjustable
Clock: 24 hours
Keypad lock: O
Operating mode: 5/2 day
Frost Protection 5˚C
Frost protection is built into this thermostat.
It is pre xed at 5°C and is not adjustable.
It will only be activated when the thermostat is in the OFF mode and the
room temperature falls below 5°C.
7
RFRP-OT Room Thermostat CombiPack4
Specications
Power supply: 2 x AA Alkaline Battery
Power consumption: 2 mW
Battery replacement: Once a year
Temp. control range: 5 … 35˚C
Ambient temperature: 0 … 45˚C
Dimensions: 130 x 99 x 25mm
Temperature sensor: NTC 100K Ohm @ 25˚C
Temperature indication: ˚C
Switching dierential: 0.4˚C
Frost protection: Only operational in O mode
Pollution degree: Pollution degree 2
8RFRP-OT Room Thermostat CombiPack4
When the thermostat is in the AUTO mode, it will operate according
to the times and temperatures that have been programmed. The user
can select from 6 dierent programs per day - each with a time and a
temperature.
There is no OFF time, only a higher and a lower temperature.
If the user wants the thermostat to be OFF at a certain time, set the
temperature for this time to be low. The thermostat will turn ON if the
room temperature is lower than the setpoint for the current period.
Example: If P1 is set to be 21˚C at 6am, and if P2 is set to be 10˚C at
8am, the thermostat will look for the temperature to be 21˚C between
6am and 8am.
How your programmable thermostat works
9
RFRP-OT Room Thermostat CombiPack4
Mounting & Installation
Caution!
Installation and connection should only be carried out by a qualied person.
Only qualied electricians or authorised service sta are permitted to open the
thermostat.
If the thermostat is used in a way not specied by the manufacturer, its safety may be
impaired.
Prior to setting the thermostat, it is necessary to complete all required settings
described in the section.
This thermostat can be mounted in the following ways:
1) Directly mounted on wall
2) Free standing - Stand Included
10 RFRP-OT Room Thermostat CombiPack4
1) The mounting height should be 1.5 metres above the oor level.
2) The thermostat should be wall mounted in the room where the
heating is to be controlled.
The place of installation should be chosen so that the sensor can
measure the room temperature as accurately as possible.
Choose the mounting location to prevent direct exposure to
sunlight or other heating / cooling sources when mounted.
3) Fix the mounting plate directly to the wall with the screws provided.
4) Attach the thermostat to the mounting plate.
5) Lower the ap at the front of the thermostat. There is a battery
compartment located below the buttons. Apply downward
pressure to remove the cover.
6) Insert the 2 x AA batteries and the thermostat will turn on.
Close the battery compartment.
Mounting & Installation (Continued)
Indice
Altri manuali EPH Controls Termostato
EPH Controls
EPH Controls T37-RFi Manuale utente
EPH Controls
EPH Controls RFCA-RF Manuale utente
EPH Controls
EPH Controls RDTP Istruzioni operative
EPH Controls
EPH Controls RFRA Manuale utente
EPH Controls
EPH Controls E 15402 Manuale utente
EPH Controls
EPH Controls CDT2-24 Manuale utente
EPH Controls
EPH Controls HRT Istruzioni operative
EPH Controls
EPH Controls HRT Istruzioni operative
EPH Controls
EPH Controls curve crtp Manuale utente
EPH Controls
EPH Controls RFRP Manuale utente
EPH Controls
EPH Controls CP4M Istruzioni operative
EPH Controls
EPH Controls RFRB Manuale utente
EPH Controls
EPH Controls CDTP2 Manuale utente
EPH Controls
EPH Controls CRTP2 Istruzioni operative
EPH Controls
EPH Controls T27-RFi Manuale utente
EPH Controls
EPH Controls RDT Istruzioni operative
EPH Controls
EPH Controls R37 Manuale utente
EPH Controls
EPH Controls RFRP-OT Manuale utente
EPH Controls
EPH Controls RFRP-HW-OT Manuale utente
EPH Controls
EPH Controls TRFPi2 Manuale utente
