ESAB LAF 1251 Manuale utente
Instruction manual
0449 505 101 GB 20230412 Valid for: serial no. 126-xxx-xxxx
LAF 1251 / LAF 1251M
TABLE OF CONTENTS
0449 505 101 © ESAB AB 2023
1SAFETY ....................................................................................................... 4
1.1 Meaning of symbols ............................................................................... 4
1.2 Safety precautions ................................................................................. 4
2INTRODUCTION.......................................................................................... 8
3TECHNICAL DATA ...................................................................................... 9
4INSTALLATION............................................................................................ 10
4.1 Location................................................................................................... 10
4.2 Connections............................................................................................ 11
5OPERATION ................................................................................................ 12
5.1 Controls................................................................................................... 12
6MAINTENANCE........................................................................................... 13
6.1 Cleaning .................................................................................................. 13
6.1.1 Welding power source.......................................................................... 13
6.1.2 Contactor.............................................................................................. 13
7ORDERING SPARE PARTS ........................................................................ 14
DIAGRAM ............................................................................................................ 15
CONNECTION INSTRUCTION............................................................................ 19
ORDERING NUMBERS....................................................................................... 21
Rights reserved to alter specifications without notice.
1 SAFETY
0449 505 101 -4- © ESAB AB 2023
1 SAFETY
1.1 Meaning of symbols
As used throughout this manual: Means Attention! Be Alert!
DANGER!
Means immediate hazards which, if not avoided, will result in immediate,
serious personal injury or loss of life.
WARNING!
Means potential hazards which could result in personal injury or loss of life.
CAUTION!
Means hazards which could result in minor personal injury.
WARNING!
Before use, read and understand the instruction manual
and follow all labels, employer´s safety practices and
Safety Data Sheets (SDSs).
1.2 Safety precautions
Users of ESAB equipment have the ultimate responsibility for ensuring that anyone who
works on or near the equipment observes all the relevant safety precautions. Safety
precautions must meet the requirements that apply to this type of equipment. The following
recommendations should be observed in addition to the standard regulations that apply to
the workplace.
All work must be carried out by trained personnel well-acquainted with the operation of the
equipment. Incorrect operation of the equipment may lead to hazardous situations which can
result in injury to the operator and damage to the equipment.
1. Anyone who uses the equipment must be familiar with:
○ its operation
○ location of emergency stops
○ its function
○ relevant safety precautions
○ welding and cutting or other applicable operation of the equipment
2. The operator must ensure that:
○ no unauthorised person is stationed within the working area of the equipment
when it is started up
○ no-one is unprotected when the arc is struck or work is started with the
equipment
3. The workplace must:
○ be suitable for the purpose
○ be free from drafts
1 SAFETY
0449 505 101 -5- © ESAB AB 2023
4. Personal safety equipment:
○ Always wear recommended personal safety equipment, such as safety glasses,
flame-proof clothing, safety gloves
○ Do not wear loose-fitting items, such as scarves, bracelets, rings, etc., which
could become trapped or cause burns
5. General precautions:
○ Make sure the return cable is connected securely
○ Work on high voltage equipment may only be carried out by a qualified
electrician
○ Appropriate fire extinguishing equipment must be clearly marked and close at
hand
○ Lubrication and maintenance must not be carried out on the equipment during
operation
WARNING!
Arc welding and cutting can be injurious to yourself and others. Take precautions
when welding and cutting.
ELECTRIC SHOCK - Can kill
• Install and ground the unit in accordance with instruction manual.
• Do not touch live electrical parts or electrodes with bare skin, wet gloves or
wet clothing.
• Insulate yourself from work and ground.
• Ensure your working position is safe
ELECTRIC AND MAGNETIC FIELDS - Can be dangerous to health
• Welders having pacemakers should consult their physician before welding.
EMF may interfere with some pacemakers.
• Exposure to EMF may have other health effects which are unknown.
• Welders should use the following procedures to minimize exposure to
EMF:
○ Route the electrode and work cables together on the same side of
your body. Secure them with tape when possible. Do not place your
body between the torch and work cables. Never coil the torch or work
cable around your body. Keep welding power source and cables as
far away from your body as possible.
○ Connect the work cable to the workpiece as close as possible to the
area being welded.
FUMES AND GASES - Can be dangerous to health
• Keep your head out of the fumes.
• Use ventilation, extraction at the arc, or both, to take fumes and gases
away from your breathing zone and the general area.
ARC RAYS - Can injure eyes and burn skin
• Protect your eyes and body. Use the correct welding screen and filter lens
and wear protective clothing.
• Protect bystanders with suitable screens or curtains.
NOISE - Excessive noise can damage hearing
Protect your ears. Use earmuffs or other hearing protection.
1 SAFETY
0449 505 101 -6- © ESAB AB 2023
MOVING PARTS - Can cause injuries
• Keep all doors, panels and covers closed and securely in place. Have only
qualified people remove covers for maintenance and troubleshooting as
necessary. Reinstall panels or covers and close doors when service is
finished and before starting engine.
• Stop engine before installing or connecting unit.
• Keep hands, hair, loose clothing and tools away from moving parts.
FIRE HAZARD
• Sparks (spatter) can cause fire. Make sure that there are no inflammable
materials nearby.
• Do not use on closed containers.
HOT SURFACE - Parts can burn
• Do not touch parts bare handed.
• Allow cooling period before working on equipment.
• To handle hot parts, use proper tools and/or insulated welding gloves to
prevent burns.
MALFUNCTION - Call for expert assistance in the event of malfunction.
PROTECT YOURSELF AND OTHERS!
CAUTION!
This product is solely intended for arc welding.
WARNING!
Do not use the power source for thawing frozen pipes.
CAUTION!
Class A equipment is not intended for use in residential
locations where the electrical power is provided by the
public low-voltage supply system. There may be
potential difficulties in ensuring electromagnetic
compatibility of class A equipment in those locations,
due to conducted as well as radiated disturbances.
1 SAFETY
0449 505 101 -7- © ESAB AB 2023
NOTE!
Dispose of electronic equipment at the recycling
facility!
In observance of European Directive 2012/19/EC on
Waste Electrical and Electronic Equipment and its
implementation in accordance with national law,
electrical and/or electronic equipment that has reached
the end of its life must be disposed of at a recycling
facility.
As the person responsible for the equipment, it is your
responsibility to obtain information on approved
collection stations.
For further information contact the nearest ESAB dealer.
ESAB has an assortment of welding accessories and personal protection equipment
for purchase. For ordering information contact your local ESAB dealer or visit us on
our website.
2 INTRODUCTION
0449 505 101 -8- © ESAB AB 2023
2 INTRODUCTION
LAF 1251 / LAF 1251M are remote-controlled 3-phase welding power sources designed for
high-efficiency mechanical submerged-arc welding (SAW).
The welding power sources are fan-cooled and are monitored by a thermal cutout against
overload. When the thermal cutout is deployed the yellow lamp on the front panel illuminates
automatically. The reset is carried out automatically when the temperature has decreased to
a permitted level.
3 TECHNICAL DATA
0449 505 101 -9- © ESAB AB 2023
3 TECHNICAL DATA
LAF 1251 LAF 1251M
Mains connection 380/400/415/500 V, 3~50 Hz 220/230/400/415/500 V, 3~50 Hz
440/550 V, 3~60 Hz 230/400/440/550 V, 3~60 Hz
Primary current Imax 104 A Imax 171 A
Permissible load at:
100 % duty cycle 1250 A / 44 V 1250 A / 44 V
Setting range 100-1250 A / 24-44 V 100-1250 A / 24-44 V
No-load voltage 53 V 53 V
No-load power 210 W 210 W
Efficiency at max current 89 % 88 %
Power factor at max
current 0.89 0,94
Apparent power at max
current 69 kVA
Active power at max
current 61.7 kW
Operating temperature -10 to +40 °C
Continual sound pressure
at no-load <70 dB(A)
Weight 490 kg 490 kg
Dimensions L × W × H 774 × 598 × 1430 mm 774 × 598 × 1430 mm
Insulation class
(transformer) H H
Enclosure class IP 23 IP 23
Application class
Enclosure class
The IP code indicates the enclosure class, i.e. the degree of protection against penetration
by solid objects or water.
Equipment marked IP23 is intended for indoor and outdoor use.
Application class
The symbol indicates that the power source is designed for use in areas with increased
electrical hazard.
4 INSTALLATION
0449 505 101 - 10 - © ESAB AB 2023
4 INSTALLATION
The installation must be carried out by a professional.
NOTE!
Mains supply requirements
High power equipment may, due to the primary current drawn from the mains
supply, influence the power quality of the grid. Therefore connection restrictions or
requirements regarding the maximum permissible mains impedance or the required
minimum supply capacity at the interface point to the public grid may apply for some
types of equipment (see "TECHNICAL DATA" chapter). In this case it is the
responsibility of the installer or user of the equipment to ensure, by consultation with
the distrubution network operator if necessary, that the equipment may be
connected.
4.1 Location
WARNING!
Secure the equipment - particularly if the ground is uneven or sloping.
• Place the welding power source on a level foundation.
• Make sure there is nothing to prevent the cooling.
Lifting instructions
Altri manuali per LAF 1251
1
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali ESAB Sistema di saldatura
ESAB
ESAB AristoFeed 30 4 Series Manuale utente
ESAB
ESAB Aristo Arc 4000i Manuale utente
ESAB
ESAB Aristo Mig WeldCloud U5000i Manuale utente
ESAB
ESAB EM 215ic Manuale utente
ESAB
ESAB POWERCUT-1250 Manuale utente
ESAB
ESAB WeldCloud Mobile Manuale utente
ESAB
ESAB LKA 150 Manuale utente
ESAB
ESAB ESABMig C280 Manuale utente
ESAB
ESAB MIG-41 Manuale utente
ESAB
ESAB Migmaster 300i cvcc Manuale di installazione e d'uso
ESAB
ESAB Origo Mig L305 Manuale utente
ESAB
ESAB ESP-50 Manuale utente
ESAB
ESAB Fabricator 181i Manuale utente
ESAB
ESAB LAF 631 Manuale utente
ESAB
ESAB Aristo RoboFeed 3004w Manuale utente
ESAB
ESAB LHJ 750 Guida
ESAB
ESAB Precision Plasmarc EPP-600 Manuale utente
ESAB
ESAB ES 95i Manuale utente
ESAB
ESAB Buddy Arc 145 Manuale utente
ESAB
ESAB ESP-200 Manuale utente
Manuali Sistema di saldatura popolari di altre marche
TAFA
TAFA 30*8B35 Manuale utente
Lincoln Electric
Lincoln Electric INVERTEC V350-PRO CE Manuale utente
CIGWELD
CIGWELD 636804 Guida rapida
Red-D-Arc
Red-D-Arc DC-400 Manuale utente
Hobart Welding Products
Hobart Welding Products Spool Gun DP 3035-10 Manuale utente
Elettro
Elettro HI-MIG 3000 SYNERGIC Manuale utente
