ESI ES1247 Istruzioni operative
ES1247
1 Channel Programmer
User and Installaon
Instrucons
What is a Channel Programmer? 1
Introducon to the 1 Channel Programmer 2
Programming the Unit- The Factory-set Programme 3
- Changing the Programme 4
Operang the Unit - Choosing the Operang Mode 5
- Using the Advance Funcon 6
- Using the +HR Boost Funcon 7
Basic Sengs - Seng the Time & Date 8
- Seng the Backlight 9
- Reseng the Unit 9
- Power Interrupon 9
INDEX
User Instrucons
Installaon Instrucons
Technical Data 10
Installaon Safety Instrucons, Maintenance & Safety Noce 11
Pre-Installaon Unit Set Up 12
Fing the Back Plate 12
New Installaons 13
Exisng Installaons 13
Wiring Diagram 14
Fing the Programmer 15
Commissioning 15
Configuraon 16
INDEX
User
Instrucons
Technical Data 10
Installaon Safety Instrucons, Maintenance & Safety Noce 11
Pre-Installaon Unit Set Up 12
Fing the Back Plate 12
New Installaons 13
Exisng Installaons 13
Wiring Diagram 14
Fing the Programmer 15
Commissioning 15
Configuraon 16
What is a Channel Programmer?...
An explanaon for householders
On some programmers you must also set whether you want the
Heang and Hot Water to run connuously, run under the chosen
‘On’ and ‘Off’ heang periods, or be permanently off. The me on
the programmer must be correct. Some types have to be adjusted in
Spring and Autumn upon the changes between Winter and Summer
me.
You may be able to temporarily adjust the heang programme, for
example, ‘Override’,‘Advance’ or ‘Boost’. These are explained in the
manufacturer’s instrucons. The heang will not work if the room
thermostat has switched the heang off. And, if you have a Hot
Water cylinder, the water heang will not work if the cylinder
thermostat detects that the Central Hot Water has reached the
correct temperature.
1
Programmers allow you to set ‘On’ and ‘Off’ me
periods. Some models switch the Central Heang and
domesc Hot Water on and off at the same me, while
others allow the domesc Hot Water and Heang to come on and
go off at different mes. Set the ‘On’ and ‘Off’ me periods to suit
your own lifestyle.
What is a Channel Programmer?...
An explanaon for householders
Introducon to the 1 Channel Programmer
This programmer can automacally switch your Central Heang or
Hot Water ON and OFF up to 3 mes a day, at whatever mes you
choose. Timekeeping is maintained through power interrupons
by a non replaceable baery designed to last for the lifeme of the
programmer and the clock is automacally put forward 1 hour at
1:00am on the last Sunday of March and back 1 hour at 2:00am on
the last Sunday of October. The clock is factory pre-set to UK me
and date, but you can alter it if you wish. During installaon, the
installer selects 24 hour, or 5 day/ 2day, or 7 day programming and
2 or 3 on/off periods per day, via a 4 posion DIP switch on the back
of the unit (see installaon instrucons).
The large, easy to read display makes programming easy and the
unit is designed to eliminate the possibility of accidental changes to
your programme. Buons normally visible, only affect your set
programme temporarily. All buons which can permanently change
your programme are located behind the flip over facia.
- The 24 hour programmer opon runs the same programme every
day.
- The 5/2 Day programmer opon allows different ON/OFF mes at
weekends.
- The 7 Day programmer opon allows different ON/OFF mes for
each day of the week.
IMPORTANT: These sengs should only be changed by a qualified
person. Contact your installer. This programmer is not suitable for
the switching of devices greater than 6Amp rated. (e.g. Not suitable
for use as an immersion mer)
2
Introducon to the 1 Channel Programmer Programming the Unit
The Factory-Set Programme
This is the factory-set programme built into the unit. If the user
changes from the factory-set programme and wishes to return to it,
pressing the reset buon with a non metallic pointed tool will return
the unit to the factory-set programme. NB. Every me the reset is
pressed, the me and date must be set again (page 8).
If the unit is installed as a 24 hour programmer the built in
programme will be the same for each day (i.e. Sat-Sun be same as
Mon-Fri above).
Changing The Programme (refer to Fig.1, Page 4)
For 7 Day Programmer Opon - the inial programme displayed will
be for Monday. You can go to any day of the week by pressing the
DAY buon repeatedly. The COPY buon will copy the current
programme onto the next day. NB. It is not possible to copy Sunday
to Monday.
For 5/2 Day Programmer Opon - the inial programme displayed
will be for Monday - Friday. Press the DAY buon for Saturday -
Sunday programme. The COPY buon will copy the current
programme onto the next day group. NB. It is not possible to copy
Saturday-Sunday programme to Monday-Friday programme.
For 24 Hour Programmer Opon - the built in programme will be
the same for each day. The COPY & DAY buons have no effect if
installed as a 24 hour programmer.
3
Configuraon
2PU & 2Gr
Configuraon
3PU & 3Gr Mon-Fri Sat-Sun
Programming the Unit
Fig. 1
4
To change the Programme mes
1. Press the SET buon (1) four mes unl the programme icon (2)
flashes, and the first ON me appears.
2. Press the +/- buons (3) to adjust the ON me. Please note, the
me will change quicker if pressed connually.
3. Press the NEXT buon (4). The display will now show 1 OFF (5).
4. Press the +/- buons (3) to adjust the OFF me. Please note, the
me will change quicker if pressed connually.
5. Press the NEXT buon (4) to access the remaining ON/OFF
periods and adjust in the same manner as above.
6. To return to RUN mode, press the SET buon (1) unl the display
indicates RUN on the display.
N.B: Programming is in 10 minute segments.
(1) (3)
(5)
(2) (4)
Fig. 1
Operang the Unit
Choosing the Operang Mode
5
ON : Central Heang and Hot Water is ON connuously
AUTO: Central Heang and Hot Water will be switched ON and
OFF in accordance with set programmes
ALL DAY: Central Heang and Hot Water will switch ON at the first
ON and switch OFF at last OFF
OFF: Central Heang and Hot Water will be permanently OFF
Mode
Indice
Altri manuali ESI Scheda madre
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
