Esko XPS CRYSTAL TOUCH 18.0 Manuale utente
XPS CRYSTAL TOUCH 18.0
USER MANUAL
21.06.2018
XPS Crystal Touch 18.0 –Operating Manual
2
© Copyright 2018
Esko-Graphics Imaging GmbH, 25524 Itzehoe, Germany
All rights reserved. This document and all information and instructions contained within are the property
of Esko-Graphics. These documents contain the product descriptions according to their current state at
the time of publication, but no responsibility whatsoever is taken for the correctness of this information.
No guarantees are granted or expanded upon by this document. Furthermore, Esko-Graphics does not
guarantee the illustrations relating to the usage of the products, or for the results from using the software
or the use of the information contained herein. Esko-Graphics is not responsible for direct or indirect
damages caused by the logical consequences or latent damages which may result from the use of the
software, or from the impossibility of software use or of the information contained herein.
The technical data contained herein and the content of this manual are subject to change without prior
notification. Revisions which point out such changes and/or supplements may be issued from time to
time.
Without express written consent, no part of this document may be reproduced, transferred, electronically
stored or published, irrespective of the reasons and irrespective of the method or means used, i.e.
electronic, mechanical, by printing, microfilm, etc.
These documents replace all previous versions.
Grapholas® is a registered trademark of Esko-Graphics Imaging GmbH.
Cyrel®, Cyrel® Digital Imaging System and Cyrel® Digital Imager (CDI) are registered trademarks of
DuPont.
Microsoft and the Microsoft Logo are registered trademarks of Microsoft Corporation in the USA and
other countries.
Esko-Graphics software may include the "RSA Data Security, Inc. MD5 Message-Digest Algorithm".
JDF and the JDF Logo are trademarks of the CIP4-Organisation. Copyright 2001 The International
Cooperation for the Integration of Processes in Prepress, Press and Postpress (CIP4). All rights
reserved.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun
Microsystems in the U.S. and/or other countries.
Some parts of this software use technologies of JGoodies, Barbecue (Copyright 2003, International
Barcode Consortium), and Jakarta (licensed by Apache: www.apache.org/licenses/LICENSE-2.0.txt).
All other product names are trademarks or registered trademarks of their respective owners.
XPS Crystal Touch 18.0 –Operating Manual
3
TABLE OF CONTENTS
1Operation of the XPS Crystal Touch Software ..................................................... 4
1.1 Start UV exposure ........................................................................................................4
1.2 Stop UV exposure.........................................................................................................5
1.3 Add new plate types .....................................................................................................6
1.4 Delete plate type...........................................................................................................7
1.5 Change desired relief....................................................................................................8
1.6 Update plate list database ............................................................................................9
1.7 Check back exposure "Check Floor"...........................................................................12
1.8 Shut down XPS Crystal...............................................................................................15
2Changing the basic settings ............................................................................... 16
2.1 Change language .......................................................................................................16
2.2 Show time...................................................................................................................17
2.3 Set date and time........................................................................................................18
2.4 Switch units (inch/mm)................................................................................................20
3Support............................................................................................................... 21
3.1 Call Teamviewer for support.......................................................................................21
XPS Crystal Touch 18.0 –Operating Manual
4
1 Operation of the XPS Crystal Touch Software
This software is designed for a touch-sensitive screen.
1.1 Start UV exposure
1 Select plate
2 Press the start button –exposure starts immediately
3 The remaining time is shown in the progress display
XPS Crystal Touch 18.0 –Operating Manual
5
The end of the exposure is shown. The removal of the plate from the XPS Crystal must be
confirmed (4).
1.2 Stop UV exposure
Exposure can be stopped at any time:
In this case, the plate is not exposed to UV fully and evenly!
XPS Crystal Touch 18.0 –Operating Manual
6
1.3 Add new plate types
1 Switch to the options menu
2 Select "Manage Plates"
3 Select the "Add" field
XPS Crystal Touch 18.0 –Operating Manual
7
4 Select the plate manufacturer
5 Select the plate type
6 In long lists, the fields can be scrolled upwards and downwards
7 "OK" adds the plate to the active plate list
1.4 Delete plate type
1 Select in the options menu
2 Select "Manage Plates"
XPS Crystal Touch 18.0 –Operating Manual
8
3 Select the plate type
4 Delete the plate type with "Remove"
1.5 Change desired relief
1 Select in the options menu
2 Select "Manage Plates"
XPS Crystal Touch 18.0 –Operating Manual
9
3 Select the plate type
4 Change the value to the select relief in the "Relief" field
1.6 Update plate list database
Copy the plate database file to the main folder on a USB stick.
1 Select in the options menu
2 Select "Manage Plates"
XPS Crystal Touch 18.0 –Operating Manual
10
3 Select "Update Platelist"
4 Follow the instructions and then insert the USB stick
Indice
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
