Accessories
1 x Bluetooth speaker, 1 x Micro USB-cable, 1x remote control, 1 x User manual
Compatibility
This p roduct is compatible with Bluetooth enabled mobile phones and devices.
Charge
1. Con nect speaker with PC/Laptop/Mac or any 5V USB adapter (not included) by the USB cable included.
2. Red LED turns ON duringcharging, turns OFF after fully charged.
3. Unp lug USB cable after fully charged.
4. Red LED twinkles when low power (<21%), with a warning sound.
Turning ON/OFF
Hold the p ower button for approx. 2 seconds to turn on, you would hear a starting chime.
Hold it again for approx. 2 seconds to turn off.
Pairing
1. Turn o n the speaker to be ready for pairing. After 3-4 seconds, you wo uld hear a chimed Bluetooth sound.
2. Activate the Bluetooth function on your mo bi le p hone o r any Bluetooth devices, search the speaker and select the
name “GlowSound1”, and connect the speaker with the device via Bluetooth pairing
3. The Bluetooth soundis chimed once more after p aired.
Note:
1. Keep the range of 1 meter wh en pairing. If the pairing was not successful,turn off th espeaker and re-pair again.
2. After successful pairing, paired devices will remembereach other so there is no need to pair again unless pairing
information is deleted.
3. To pair with a new device, fo llowsteps 1-3 above after d isconnected from existing device.
TWS (True Wireless Stereo) Function: to pairone mobile phone with 2 speakers together
1. Make sure you have 2 GlowSound1 speakers at your hand,turn on both sp eakers together, then quickly double
click “Power” button s of bo th speakers, both speakers will into pairing mode to pair with each other first.
2. Wait for aro und 5-10 seconds until two speakers “beep” o nce in sequence, which means both speakers paired with
each oth er already.
3. Then, activate Bluetooth function of your device and pair with Bluetooth name GlowSound1. You would enjoy
music in True Wireless Stereo sound from two speakers simultaneously.
Warm notes:
1. You can only enjoy TWS function when you have 2 ES652800 speakers.
2. If you want to disconnect existingTWS connection, double click “Power” button of either speaker, the sub-speaker
will d isconnect, the host speaker will keep playing music.
3. If you want to establish TWS connection with 2nd speaker after your device connected with o ne speaker already,
please lo ng press” power “button to disconnect from your existingpaired device, then follow above steps 1-3.
Operation by remote control (please remove the plastic tab from the battery coverbefore use).
1.Standby: press to into/out of Standby mode afterpoweringon the speaker.
2.Change brightness.
3.Switch on/off the light.
4. Switch to Bluetooth mode.
5. Go to selected single color directly.
6. Repeatedly press it to change colors in a loop.
7. Switch light to Flash mode(Beats to music).
8. Switch light to Smooth mode(Breathing light slowly change colors)
9. Switch to white color directly.
10. Go to previous/next track (not workable under AUX mode).
13. Play and Pause.
14.Voice - and +
15. Switch to AUX or USB-play mode.
