EtherWAN EX43000 series Manuale utente
EX43000 series www.etherwan.com
Quick Start Guide
This quick start guide describes how to install and use the
Industrial Ethernet Switch. This is the switch of choice for
harsh environments constrained by space.
Physical Description
The Port Status LEDs
1
EX43000 series www.etherwan.com
LED State Indication
Steady Power on.
Power 1, 2 (Green) Off Power off.
Steady Relay starts alarm.
Fault (Red) Off Relay non-alarm.
Ports
Steady A valid network connection established.
Blinking Transmitting or receiving data.
ACT stands for Activity.
Link/ACT (Green)
Off No link.
2
EX43000 series www.etherwan.com
The Terminal Block and Power Inputs
Power Input Assignment
＋12~48VDC
Power 1
－Power Ground
＋12~48VDC
Power 2
－Power Ground
Earth Ground
Terminal Block
Relay Output Rating 1A @ 250VAC
DC Terminal Block Power Inputs: The DC Terminal Block
power inputs can be used to power up this Switch.
DIP Switch Settings
DIP No. On Off
1 Port 1 Alarm Enable. Port 1 Alarm Disable.
2 Port 2 Alarm Enable. Port 2 Alarm Disable.
3 Port 3 Alarm Enable. Port 3 Alarm Disable.
4 Port 4 Alarm Enable. Port 4 Alarm Disable.
5 Port 5 Alarm Enable. Port 5 Alarm Disable.
6 Port 6 Alarm Enable. Port 6 Alarm Disable.
7 Port 7 Alarm Enable. Port 7 Alarm Disable.
8 Port 8 Alarm Enable. Port 8 Alarm Disable.
9
Broadcast Storm Protection
Enable. (Broadcast Storm will
be dropped off when more than
3000pps.)
Broadcast Storm Protection
Disable.
10 Reserved
3
EX43000 series www.etherwan.com
The 10/100Base-TX and 100Base-FX/BX Connectors
1. The 10/100Base-TX Connections
The following lists the pinouts of 10/100Base-TX ports.
Pin Regular Ports Uplink port
1 Output Transmit Data + Input Receive Data +
2 Output Transmit Data - Input Receive Data -
3 Input Receive Data + Output Transmit Data +
4 NC NC
5 NC NC
6 Input Receive Data - Output Transmit Data -
7 NC NC
8 NC NC
2. The 100Base-FX Connections
The fiber port pinouts: The Tx (transmit) port of device I is
connected to the Rx (receive) port of device II, and the Rx
(receive) port of device I to the Tx (transmit) port of device II.
3. The WDM 100Base-BX Connections
The fiber port pinouts: Only one optical fiber is required to
transmit and receive data.
4
EX43000 series www.etherwan.com
4. The 100Base-FX/BX SFP Socket Connections
The SFP socket for fiber optic expansion.
Functional Description
Meets EN61000-6-2 & EN61000-6-4 EMC Generic
Standard Immunity for industrial environment.
Supports 802.3/802.3u/802.3x. Auto-negotiation:
10/100Mbps, full/half-duplex. Auto MDI/MDIX.
100Base-FX: Multi mode/Single mode SC or ST type.
100Base-BX: WDM Multi mode/Single mode SC type.
SFP socket for fiber optic expansion.
Supports 1024 MAC addresses. Provides 448K bits
memory buffer.
Alarms for power and port link failure by relay output 1A
@ 250VAC.
Power consumption: 6W Max.
Power Supply: Redundant 12~48VDC Terminal Block
power inputs.
-20°C to 60°C (-4°F to 140°F) operating temperature
range.
Supports DIN-Rail or Panel Mounting installation.
Assembly, Startup, and Dismantling
Assembly: Place the device on the DIN Rail from above
using the slot. Push the front of the device toward the
mounting surface until it audibly snaps into place.
Startup: Connect the supply voltage to start up the
device via the terminal block.
5
EX43000 series www.etherwan.com
Dismantling: Pull out the lower edge and then remove
the device from the DIN Rail.
6
EX43000 series www.etherwan.com
7
Preface
A member of the growing family of rugged switches, this
switch addresses a need for a smaller switch. This switch
provides an affordable solution for rugged and outdoor
environment, transportation road-side cabinet, industrial floor
shop, multitenant dwellings or Fiber To The Home (FTTH)
applications. Capable of operating at temperature extremes of
-20°C to +60°C, this is the switch of choice for harsh
environments constrained by space.
Plug-and-Play Solution:
The switch is a plug-and-play Fast Ethernet Switch in
compact size. It doesn't have any complicated software to set
up.
This manual describes how to install and use the Industrial
Ethernet Switch. This switch integrates full wire speed
switching technology. This switch brings the answer to
complicated hardened networking environments.
To get the most out of this manual, you should have an
understanding of Ethernet networking concepts.
In this manual, you will find:
Features on the switch
Illustrative LED functions
Installation instructions
Specifications
EX43000 series www.etherwan.com
8
Table of Contents
QUICK START GUIDE 1
PHYSICAL DESCRIPTION 1
The Port Status LEDs 1
The Terminal Block and Power Inputs 3
DIP Switch Settings 3
The 10/100Base-TX and 100Base-FX/BX Connectors 4
FUNCTIONAL DESCRIPTION 5
ASSEMBLY,STARTUP,AND DISMANTLING 5
PREFACE 7
TABLE OF CONTENTS 8
PRODUCT OVERVIEW 9
INDUSTRIAL ETHERNET SWITCH 9
PACKAGE CONTENTS 9
PRODUCT HIGHLIGHTS 10
Basic Features 10
FRONT PANEL DISPLAY 11
PHYSICAL PORTS 12
INSTALLATION 13
SELECTING A SITE FOR THE SWITCH 13
DIN RAIL MOUNTING 14
CONNECTING TO POWER 15
Redundant DC Terminal Block Power Inputs 15
Alarms for Power and Port Failure 16
DIP Switch Settings 16
CONNECTING TO YOUR NETWORK 17
Cable Type & Length 17
Cabling 18
SPECIFICATIONS 19
APPENDIX A–CONNECTOR PINOUTS 21
EX43000 series www.etherwan.com
Product Overview
Industrial Ethernet Switch
Package Contents
When you unpack the product package, you shall find the
items listed below. Please inspect the contents, and report
any apparent damage or missing items immediately to your
authorized reseller.
This Switch
User’s Manual
9
EX43000 series www.etherwan.com
10
Product Highlights
Basic Features
Meets EN61000-6-2 & EN61000-6-4 EMC Generic
Standard Immunity for industrial environment.
Supports 802.3/802.3u/802.3x. Auto-negotiation:
10/100Mbps, full/half-duplex. Auto MDI/MDIX.
100Base-FX: Multi mode/Single mode SC or ST type.
100Base-BX: WDM Multi mode/Single mode SC type.
SFP socket for fiber optic expansion.
Supports 1024 MAC addresses. Provides 448K bits
memory buffer.
Alarms for power and port link failure by relay output 1A
@ 250VAC.
Power consumption: 6W Max.
Power Supply: Redundant 12~48VDC Terminal Block
power inputs.
-20°C to 60°C (-20°F to 140°F) operating temperature
range.
Supports DIN-Rail or Panel Mounting installation.
Altri manuali per EX43000 series
1
Indice
Altri manuali EtherWAN Interruttore
EtherWAN
EtherWAN EX73900 Series Manuale utente
EtherWAN
EtherWAN EX32905 Series Manuale utente
EtherWAN
EtherWAN EG97203 Series Manuale utente
EtherWAN
EtherWAN EX16926 Manuale utente
EtherWAN
EtherWAN EX45900 series Manuale utente
EtherWAN
EtherWAN EX87000 Series Manuale utente
EtherWAN
EtherWAN EX78600 Manuale utente
EtherWAN
EtherWAN EX17008 Manuale utente
EtherWAN
EtherWAN EX29000 Manuale utente
EtherWAN
EtherWAN EX41941 Manuale utente
EtherWAN
EtherWAN EX33000 Series Manuale utente
EtherWAN
EtherWAN EX26262F Series Manuale utente
EtherWAN
EtherWAN EX19082 Manuale utente
EtherWAN
EtherWAN EX83000 Manuale utente
EtherWAN
EtherWAN EX17082A Manuale utente
EtherWAN
EtherWAN EX46910F Manuale utente
EtherWAN
EtherWAN EX17908 Series Manuale utente
EtherWAN
EtherWAN EX42908 series Manuale utente
EtherWAN
EtherWAN EX42300 series Manuale utente
EtherWAN
EtherWAN EX87000 Series Manuale utente
