EtherWAN ER58000 Series Manuale utente

ER58000 rev. 1.0

12/2/2014

1 Unpacking

Unpack the items. Your package should include:

One ER58000 Series hardened managed

switch

Rack-mounting hardware brackets

One CD containing this user’s guide

If items are missing or damaged, notify your

EtherWAN representative. Keep the carton and

packing material.

2 What Else You Need

Appropriate cables for data ports

Personal computer or laptop

3 Select a Location

Desktop installations: Mount on a flat table

or shelf surface.

Rack installations: Use a 19-inch (48.3-

centimeter) EIA standard equipment rack

that is grounded and physically secure.

Identify a power source within 6 feet (1.8

meters).

Choose a dry area with ambient temperature

between -40 and 75ºC (-40 and 167ºF).

Be sure there is adequate airflow.

4 Connect to the Data Ports

Your switch has the following ports:

8 10/100Base-M12 D-Code 4-pin female ports

2 Gigabit-M12 A-Code 8-pin female/LC ports

10/100Base-M12 Ports

These ports support Power over Ethernet (PoE).

They conform to IEEE802.3at and provide up to

30W per port, with a total power budget of

120W. Use these ports to connect to devices such

as an IP surveillance camera or a Voice Over

Internet Protocol (VoIP) phone.

Gigabit-M12 Ports

These ports come as 10/100/1000Base-TX,

1000Base-SX, or 1000Base-LX interfaces.

These ports can connect to network devices such

as a computer, printer, network video recorder

(NVR), network storage, or they can connect to

the network itself. Wear an ESD-preventive wrist

strap before connecting to these ports.

5 Apply DC Power

The switch supports two sets of power supplies —

power input 1 and power input 2.The M23 6-pin

male connector on the front panel is used for the

dual power inputs. Use a power cord with an M23

6-pin female connector to connect the power

inputs to the switch.

Description

Power 2



24-48VDC



Power Ground

Power 1



24-48VDC



Power Ground

Earth Ground

Relay Output Rating

1A @ 250VAC

Description

PWR1 Live / DC + (24-48VDC)

PWR1 Neutral / DC -

Chassis Ground

PWR2 Neutral / DC -

PWR2 Live / DC + (24-48VDC)

ER58000 Series Hardened Managed Ethernet Switch

Installation Guide

Continued on next page

ER58000 Managed Switch Installation Guide

ER58000 rev. 1.0

12/2/2014

Power-Up Sequence

When you apply DC power:

All Link/ACT LEDs blink momentarily.

The Power LED goes ON.

LEDs for ports connected to a device flash.

6 Front Panel LEDs

LED

Color

Status

Power 1

Power 2

Green

ON = power on.

OFF = power off.

10/100Base-TX LEDs

Link/Act

Green

ON = valid network connection established.

Flashing = port sending or receiving data.

10/100/1000Base-TX LEDs

Link/Act

Green

ON = valid network connection established.

Flashing = port sending or receiving data.

1000Base-SX/LX LEDs

Link/Act

Orange

ON = valid network connection established.

Flashing = port sending or receiving data.

7 Managing the Switch

The following procedures are optional, but

recommended for a basic configuration.

A. Connect a PC to an available switch port

using an appropriate cable.

B. Confirm that the Link/ACT LED for the switch

port to which the PC is connected is ON. If

not, choose a different port.

C. Configure the PC’s TCP/IP settings to use the

subnet 192.168.1.Xand subnet mask

255.255.255.0, where Xis a number from 2

to 254 other than 10.

D. In a Web browser address bar, type

http://192.168.1.10 and press Enter.

E. Log in to the management interface:

F. Change the system name:

- In the left pane, click +next to System,

then click System Name/Password.

- On the right side, click in the System

Name text box.

- Replace the name shown with a name you

want to assign to the switch.

- Click the Update Setting button.

G. By default there is no password assigned to

the switch. To add a password:

- In the page above, click in the Password

text box, enter a password, and retype it

in the Retype Password text box.

- Click Update Setting below the

Retype Password text box.

H. Change the switch’s IP address and subnet

mask to match the scheme on your network:

Altri manuali EtherWAN Interruttore

EtherWAN

EtherWAN EX73000 Series Manuale utente

EtherWAN

EtherWAN EX87000 Series Manuale utente

EtherWAN

EtherWAN EX42008 Series Manuale utente

EtherWAN

EtherWAN EX61000A Manuale utente

EtherWAN

EtherWAN EX83304 Series Manuale utente

EtherWAN

EtherWAN EX70900 Manuale utente

EtherWAN

EtherWAN EX1624W Manuale utente

EtherWAN

EtherWAN EX32905 Series Manuale utente

EtherWAN

EtherWAN EX26262F Series Manuale utente

EtherWAN

EtherWAN EX77900 Series Manuale utente

EtherWAN

EtherWAN EX42000 Series Manuale utente

EtherWAN

EtherWAN EX17242 Manuale utente

EtherWAN

EtherWAN EX17242 Manuale utente

EtherWAN

EtherWAN EX83000 Manuale utente

EtherWAN

EtherWAN OttoE TF100 Sereis Manuale utente

EtherWAN

EtherWAN EX77000 Series Manuale utente

EtherWAN

EtherWAN EX19162 Manuale utente

EtherWAN

EtherWAN ER59000 Series Manuale utente

EtherWAN

EtherWAN EX78162 Series Manuale utente

EtherWAN

EtherWAN OttoE TG103 Series Manuale utente

EtherWAN

EtherWAN EX32905 Series Manuale utente

EtherWAN

EtherWAN EX19162A Manuale utente

EtherWAN

EtherWAN EX78000R Manuale utente

EtherWAN

EtherWAN EX17162 Manuale utente

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente