F&S Bondtec LAB-Tester LT-101 Manuale utente
Service Manual Page 1
Service Manual Page 2
About this quick guide:
Service Manual Page 3
Table of contents
ABOUT THIS QUICK GUIDE: 2
4
4
5
5
5
6
6
6
7
7
8
8
8
8
9
10
11
12
13
13
13
14
15
15
16
16
16
16
17
17
18
Service Manual Page 4
Secure the bond tester off and before switching it
on again:
Service Manual Page 5
Mounting the protective cage
Remove the head cable.
Open the 4 fastening screws on the test head
Careful removal of the test head
Service Manual Page 6
Remove the axis cable.
Open the 4 fastening screws
Service Manual Page 7
Degrease and clean the spindle and linear guides
with cleanroom cloths and industrial alcohol or
spirit.
Then re-lubricate the spindle and the linear guides
with a machine grease suitable for cleanroom use.
(e.g.: ISOFLEX Klüber NBU 15)
Available under the order number VK-DIV-B00007
Service Manual Page 8
Service Manual Page 9
Service Manual Page 10
Altri manuali F&S Bondtec Apparecchiature di prova
Manuali Apparecchiature di prova popolari di altre marche
SMART
SMART KANAAD SBT XTREME 3G Series Manuale utente
Agilent Technologies
Agilent Technologies BERT Serial Manuale utente
Agilent Technologies
Agilent Technologies N3280A Manuale utente
Vernier
Vernier Go Direct Voltage Manuale utente
Lifeloc
Lifeloc R.A.D.A.R. Manuale utente
Fluke
Fluke T5-600 Istruzioni per l'uso e l'installazione
