Feig Electronic ID ISC.LRU3500 Manuale utente

INSTALLATION

final – public (B)

2013-01-17 – M21016-1e-ID-B.docx

ID ISC.LRU3000 / ID ISC.LRU3500

UHF Long Range Reader

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 2 of 32 M21016-1e-ID-B.docx

Note

FEIG ELECTRONIC GmbH

Lange Strasse 4

D-35781 Weilburg

Tel.: +49 6471 3109-0

http://www.feig.de

With the edition of this document, all previous editions become void. Indications made in this manual may be

changed without previous notice.

Copying of this document, and giving it to others and the use or communication of the contents thereof are

forbidden without express authority. Offenders are liable to the payment of damages. All rights are reserved

in the event of the grant of a patent or the registration of a utility model or design.

Composition of the information in this document has been done to the best of our knowledge. FEIG

ELECTRONIC GmbH does not guarantee the correctness and completeness of the details given in this

manual and may not be held liable for damages ensuing from incorrect or incomplete information. Since,

despite all our efforts, errors may not be completely avoided, we are always grateful for your useful tips.

The instructions given in this manual are based on advantageous boundary conditions. FEIG ELECTRONIC

GmbH does not give any guarantee promise for perfect function in cross environments and does not give

any guaranty for the functionality of the complete system which incorporates the subject of this document.

FEIG ELECTRONIC call explicit attention that devices which are subject of this document are not designed

with components and testing methods for a level of reliability suitable for use in or in connection with surgical

implants or as critical components in any life support systems whose failure to perform can reasonably be

expected to cause significant injury to a human. To avoid damage, injury, or death, the user or application

designer must take reasonably prudent steps to protect against system failures.

Use Exclusion in Transportation Market: Devices which are subject of this document may NOT be sold,

used, leased, offer for sale, or otherwise transferred, exported, and imported by anyone in the Transportation

Market. “Transportation Market” means (i) Electronic Toll and Traffic Management (ETTM), (ii) Public Sector

Vehicle Registration, Inspection and Licensing Programs, (iii) Railroad Locomotive and Wagon tracking, (iv)

airport based ground transportation management systems (GTMS) and taxi dispatch, (v) revenue based

parking, and (vi) vehicle initiated mobile payment applications, where the RFID sticker/tag is initially attached

to the vehicle but not incorporated at the point of vehicle manufacture.

FEIG ELECTRONIC GmbH assumes no responsibility for the use of any information contained in this docu-

ment and makes no representation that they free of patent infringement. FEIG ELECTRONIC GmbH does

not convey any license under its patent rights nor the rights of others.

OBID®and OBID i-scan®are registered trademarks of FEIG ELECTRONIC GmbH.

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 3 of 32 M21016-1e-ID-B.docx

General information's regarding this document

•The sign "" indicates extensions or changes of this manual compared with the former issue.

•If bits within one byte are filled with "-", these bit spaces are reserved for future extensions or

for internal testing- and manufacturing-functions. These bit spaces must not be changed, as this

may cause faulty operation of the reader.

•The following figure formats are used:

0...9: for decimal figures

0x00...0xFF: for hexadecimal figures,

b0...1 for binary figures.

•The hexadecimal value in brackets "[ ]" marks a control byte (command).

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 4 of 32 M21016-1e-ID-B.docx

Contents

1. Safety Instructions / Warning - Read before start-up ! 6

2. Performance Features of Reader Family ID ISC.LRU3000 7

2.1. Performance features........................................................................................................7

2.2. Available Reader types .....................................................................................................7

2.3. Available Accessories.......................................................................................................7

3. Installation 8

4. Terminals 9

4.1. Antenna Connection .......................................................................................................10

4.2. Power Supply...................................................................................................................11

4.2.1. Power Supply via connection X1................................................................................11

4.2.2. Power Supply via Power over Ethernet (PoE)............................................................12

4.3. Interfaces .........................................................................................................................13

4.3.1. Ethernet Interface on connector X2............................................................................13

4.3.2. USB Interface on connector X3..................................................................................13

4.3.3. USB Interface on connector X4 (WLAN) ....................................................................14

4.3.4. RS232 Interface on connector X6 ..............................................................................14

4.3.5. RS485 Interface on connector X6..............................................................................15

4.3.5.1. Address assignment of RS485 for bus operation ...........................................16

4.3.6. Data-Clock Interface on connector X5........................................................................16

4.4. Digital Inputs on connector X5.......................................................................................18

4.5. Outputs on connector X5................................................................................................19

4.5.1. Digital outputs on connector X5 .................................................................................19

4.5.2. Relay outputs on connector X5..................................................................................20

5. Operating and Display Elements 22

5.1. Status LEDs.....................................................................................................................22

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 5 of 32 M21016-1e-ID-B.docx

5.2. Reset Push Buttons ........................................................................................................23

5.3. Reader Power adjustment...............................................................................................24

5.3.1. EU-Reader according to EN302 208..........................................................................24

5.3.2. FCC-Reader according to FCC 47 Part 15.................................................................25

6. Technical Data 26

7. Radio Approvals 29

7.1. Europe (CE)......................................................................................................................29

7.2. Declaration of Conformity (Directive 1999/5/EC - R&TTE)............................................30

7.3. USA (FCC) and Canada (IC)............................................................................................31

7.3.1. USA (FCC) and Canada (IC) warning notices............................................................31

7.3.2. Label Information.......................................................................................................32

7.3.3. Installation with FCC / IC Approval.............................................................................32

7.3.4. USA (FCC) and Canada (IC) approved antennas ......................................................32

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 6 of 32 M21016-1e-ID-B.docx

1. Safety Instructions / Warning - Read before start-up !

•The device may only be used for the intended purpose designed by for the manufacturer.

•The operation manual should be conveniently kept available at all times for each user.

•Unauthorized changes and the use of spare parts and additional devices which have not been

sold or recommended by the manufacturer may cause fire, electric shocks or injuries. Such

unauthorized measures shall exclude any liability by the manufacturer.

•The liability-prescriptions of the manufacturer in the issue valid at the time of purchase are valid

for the device. The manufacturer shall not be held legally responsible for inaccuracies, errors,

or omissions in the manual or automatically set parameters for a device or for an incorrect

application of a device.

•Repairs may only be executed by the manufacturer.

•Installation, operation, and maintenance procedures should only be carried out by qualified

personnel.

•Use of the device and its installation must be in accordance with national legal requirements

and local electrical codes .

•When working on devices the valid safety regulations must be observed.

•Special advice for carriers of cardiac pacemakers:

Although this device doesn't exceed the valid limits for electromagnetic fields you should keep

a minimum distance of 25 cm between the device and your cardiac pacemaker and not stay in

an immediate proximity of the device respective the antenna for some time.

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 7 of 32 M21016-1e-ID-B.docx

2. Performance Features of Reader Family ID ISC.LRU3000

2.1. Performance features

The Reader has been developed for reading passive data carriers, so-called „Smart Labels“, using

an operating frequency in the UHF range.

2.2. Available Reader types

The following Readers are available:

Table 1: Available Reader Types

Reader type Description

ID ISC.LRU3500-EU Device version for Europe with PoE (max. 4Watt)

ID ISC.LRU3000-EU Device version for Europe without PoE (max. 2Watt)

ID ISC.LRU3500-FCC Device version for USA with PoE (max. 4Watt)

ID ISC.LRU3000-FCC Device version for USA without PoE (max. 2Watt)

2.3. Available Accessories

The following optional accessories are currently available:

Table 2: Optional Reader Accessories

Reader type

Description

ID ISC.LR.CSC-IP64 Connector

Sealing Cap

Protection cap for IP 64

Art.No.: 3558.000.00

ID ISC.LRU3x00-MS Mounting

Rail Set

Rail Mounting Set for ID ISC.LRU3000/3500

Art.No.: 3831.000.00

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 8 of 32 M21016-1e-ID-B.docx

3. Installation

The Reader is designed for wall-mount, including outdoors. Holes for mounting on a wall are

provided in the housing.

It is not necessary to open the reader housing mounting.

261,3 (10.29)

157,3 (6.19)

241,7 (9.52)

34 (1.34)25,5 (1.00)

68 (2.68)

Figure 1: Installation Drawing

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 9 of 32 M21016-1e-ID-B.docx

4. Terminals

On the lower side of the reader housing the different cable connectors are positioned. Figure 2:

Connection Overview shows the arrangement of the connectors and Table 3: Connection terminals

shows which connection for the different cables are used for. Table 4: Push button function shows

the available push buttons.

X2 X3 X4

T1 T2

X1 ANT1 ANT2 ANT3 ANT4

Figure 2: Connection Overview

Table 3: Connection terminals

Connector Description

ANT 1-4 Connection of the external antennas (Impedance 50Ω)

X1 Power supply 24VDC +-5%

X2 10/100Tbase network connection with RJ-45 (with PoE)

X3 USB interface for host communication

X4 USB interface for WLAN-Sticks

X5 Digital input and output and relay output

X6 RS232 / 485 interface

Table 4: Push button function

Push button Description

T1 Internal push button for complete configuration reset

T2 External push button for CPU-Reset

OBID

i-scan

UHF

Installation

ID ISC.LRU3000/3500

FEIG ELECTRONIC GmbH Page 10 of 32 M21016-1e-ID-B.docx

4.1. Antenna Connection

The external SMA antenna connectors are positioned on the lower side of the reader.

The maximum tightening torque for the SMA sockets is 0.45 Nm (4.0 lbf in).

CAUTION:

Exceeding the tightening torque will destroy the plug.

Table 5: External antenna connection

Terminal Description

ANT 1 - 4 Connection for external antennas (input impedance 50Ω)

Figure 3: External antenna connection ANT1-4 and X1 for the power supply

CAUTION:

A direct connection of an antenna to an antenna output with activated DC Voltage (24 VDC,

500 mA) may damage the antenna.

Altri manuali per ID ISC.LRU3500

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Feig Electronic Sistema RFID

Feig Electronic

Feig Electronic ID CPR50.10-E Manuale utente

Feig Electronic

Feig Electronic OBID classic-pro ID CPR.04.P/AB-USB Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANT1710/690 Crystal Gate Excellence... Manuale utente

Feig Electronic

Feig Electronic ID ISC.LRU3500 Manuale utente

Feig Electronic

Feig Electronic OBID ID RW40.30-USB Manuale utente

Feig Electronic

Feig Electronic ID CPR60 Manuale utente

Feig Electronic

Feig Electronic OBID i-scan HF ID ISC.ANT1300/680-GPC Manuale utente

Feig Electronic

Feig Electronic OBID classic-pro ID CPR.02.10-AD Manuale utente

Feig Electronic

Feig Electronic ID ISC.ANT.U500/270 Manuale utente

Feig Electronic

Feig Electronic OBID classic-pro ID CPR.03.20-CD Manuale utente

Feig Electronic

Feig Electronic OBID classic-pro ID CPR40.30-A Manuale utente

Feig Electronic

Feig Electronic OBID i-scan ID ISC.ANT.UMUX Manuale per l'uso e la cura

Feig Electronic

Feig Electronic OBID i-scan RFID-Tunnel Istruzioni per l'installazione e il funzionamento

Feig Electronic

Feig Electronic ID LRU500i-BD Series Manuale utente

Feig Electronic

Feig Electronic ID ISC.MR102 Manuale utente

Feig Electronic

Feig Electronic OBID i-scan ID ISC.MR101-USB Manuale utente

Feig Electronic

Feig Electronic OBID i-scan ID ISC.MR101-USB Manuale utente

Feig Electronic

Feig Electronic ID HyWEAR compact Manuale utente

Feig Electronic

Feig Electronic OBID classic-pro ID CPR.M04.P/AB-U2 Manuale utente

Feig Electronic

Feig Electronic ID ISC.PRH101-A Manuale utente

Feig Electronic

Feig Electronic OBID i-scan ID ISC.MRU200i Manuale utente

Feig Electronic

Feig Electronic OBID i-scan ID ISC.LRM2500-A Manuale utente

Feig Electronic

Feig Electronic OBID ID ISC.ANT40/30 Manuale utente

Feig Electronic

Feig Electronic OBID i-scan ID ISC.ANT.MUX Manuale utente

Manuali Sistema RFID popolari di altre marche

Chainway

Chainway R1 Manuale utente

IFM

IFM DTC600 Manuale utente

Elatec

Elatec TWN4 MULTITECH NANO LEGIC 63 M Manuale utente

RHOMBUS

RHOMBUS DR20 Manuale utente

Sirit

Sirit IDentity 6204 Manuale utente

SOREX

SOREX FLEX Manuale utente

Omron

Omron V780-HMD68-EIP-KR Manuale utente

IDENTEC SOLUTIONS

IDENTEC SOLUTIONS iPOINT Si Istruzioni per l’uso

Shuttle

Shuttle BR06 Istruzioni utente

Digilock

Digilock Curve Keypad Basic Manuale utente

Atid

Atid AT870 Manuale utente

Chacon

Chacon 34958 Manuale utente

Paxton

Paxton PROXIMITY architectural reader Manuale utente

CipherLab

CipherLab 1800 series Manuale utente

Brady

Brady FR22 Manuale utente

Kronotech

Kronotech BLUEBOX GEN2 M30 UHF Manuale utente

Unitech

Unitech RH767 Manuale utente

Honeywell

Honeywell 026366.00 Manuale utente