Fein KBM 50 auto Guida all'installazione

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 1/103Version 1.0

Repair instructions

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 2/103Version 1.0

1. Models described

2. Technical data

3. Notes / requirements

4. Tools required

5. Lubricants and auxiliary substances required

6. Disassembly

7. Assembly

8. Troubleshooting

9. Connection diagram

Contents

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 3/103Version 1.0

These instructions describe how to repair the following models:

Model Order no.

KBM 50 Auto 7 27 042 00 23 0

JCM 200 Auto 7 27 046 12 36 0

1. Models described

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 4/103Version 1.0

2. Technical data

Technical data

The complete technical data can be found in the operating instructions for the model.

Test data

Up-to-date test data for all models can be found on the FEIN Extranet (Customer Service → Repair Guides).

Lubricants

The lubricants and container sizes available from FEIN can be found on the FEIN Extranet

(Customer Service → Repair Guides).

Lists of spare parts

Lists of spare parts and exploded views are available online at www.fein.com

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 5/103Version 1.0

3. Notes / requirements

Note

These instructions are only intended for persons with suitable technical training. It is assumed

that the reader has mechanical and electrical training.

Only use original FEIN spare parts!

Requirements

Please note that power tools may only be repaired, maintained and checked by a trained

electrician, as improper repair can result in serious risks to the user.

The provisions set out in DIN VDE 0701-0702 should be observed after repairs.

The relevant accident prevention regulations of the employers’ liability insurance associations are

to be observed when commissioning.

The German Equipment and Product SafetyAct applies for correct use.

Outside Germany, the regulations applicable in the relevant country must be observed!

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 6/103Version 1.0

4. Tools required

Standard tool Special tool Order number

- Torx 15 and 20 screwdrivers

- 2x cross screwdriver

- Slotted screwdriver

- Socket wrenches: sizes 2; 2.5; 3; 4;

5; 6

- Arbor press

- 2x plastic hammer

- Size 5 punch

- Rubber hammer

- Circlip pliers for

inner and outer rings

- Inner bearing puller, 6-10 mm

- Inner bearing puller, 12-16 mm

- Inner bearing puller, 18-22 mm

- Torque wrench with

hexagon socket fixture 2.5 mm

- Hammer

- Drift key 6 33 05 003 00 3

- Press-on fixture 6 41 01 019 00 8

- Drawing-off socket cap 6 41 04 150 00 8

- Chuck cone 19mm

26mm 6 41 07 019 00 7

6 41 07 026 00 0

- Hook 6 41 22 121 01 0

- Extractor

NOTE

You can only order special tools with an order number from FEIN.

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 7/103Version 1.0

4. Tools required

Standard tool

- Sleeve Outer diameter

Inner diameter ~65 mm

55 mm

Outer diameter

Inner diameter ~55 mm

40 mm

Outer diameter

Inner diameter ~53 mm

45 mm

Outer diameter

Inner diameter ~52 mm

38 mm

Outer diameter

Inner diameter 40 mm

~30mm

Outer diameter

Inner diameter ~35 mm

25 mm

Outer diameter

Inner diameter 30mm

~15mm

NOTE

You can only order special tools with an order number from FEIN.

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 8/103Version 1.0

4. Tools required

Standard tool

- Sleeve Outer diameter

Inner diameter 28mm

~21mm

Outer diameter

Inner diameter ~25mm

15mm

Outer diameter

Inner diameter 21mm

~10mm

- Ball bearing support 19 mm

26 mm

- Base Height

Width 66 mm

~20 mm

NOTE

You can only order special tools with an order number from FEIN.

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 9/103Version 1.0

5. Lubricants and auxiliary substances

required

Lubricants

Grease 0 40 106 0100 1 5g NILOS ring, sealing rings, shaft (spider), guide,

Feed gearbox (three balls, worm, worm wheel)

Grease 0 40 118 0300 9 120g Gearbox

KBM 50 Auto

FEIN retains all rights of disposal, such as copying and circulation.

C-SC_CSSM 2013-09-01 10/103Version 1.0

1. Remove container (1).

6. Disassembly

Disassembling container

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fein Utensili elettrici

Manuali Utensili elettrici popolari di altre marche

AEG

AEG OMNI-JS Manuale utente

SIP

SIP 01533 Manuale utente

Ribimex

Ribimex PRS499 Manuale utente

3M Fiber Optic Connector Crimp Tool Manuale utente

Ryobi

Ryobi P524 Manuale utente

ROJEK

ROJEK FSN 300A Manuale utente

Kemper

Kemper 1740PRO Manuale utente

WABCO

WABCO OptiTire Manuale utente

EINHELL

EINHELL TE-MS 18/210 Li Manuale utente

Orgapack

Orgapack OR-T 85 Guida rapida

TOUGHCUT

TOUGHCUT Diamond 400 Manuale utente

Yaros

Yaros PB-3603 Manuale utente

Baileigh Industrial

Baileigh Industrial SS-2725 Manuale utente

Milwaukee

Milwaukee 2674-20 Manuale utente

Princess

Princess Electric Multi Sharpener Manuale utente

FOREDOM

FOREDOM K.1050 Manuale

Blaupunkt

Blaupunkt TIF 30 DA Manuale utente

Silca

Silca MARKER 2000 Manuale utente