FeiYu Tech SCORP Mini Manuale utente
Instructions V 1.0
Tutorial Videos
Catalogue
1. Overview …………………………………………………………………………………………………… 1
2. Getting started ……………………………………………………………………………………………… 2
2.1 Charging ……………………………………………………………………………………………………………… 2
2.2 Adjust the gimbal to gimbal balancing position ……………………………………………………………… 2
3. Mounting the Camera/Smartphone …………………………………………………………………… 3
3.1 Attach the quick release plate …………………………………………………………………………………… 3
3.2 Install lens holder (Optional) ……………………………………………………………………………………… 3
3.3 Mount camera on gimbal ………………………………………………………………………………………… 4
4. Gimbal Balancing ………………………………………………………………………………………… 4
4.1 Balancing the tilt axis ……………………………………………………………………………………………… 5
4.2 Balancing the roll axis ……………………………………………………………………………………………… 6
4.3 Balancing the pan axis …………………………………………………………………………………………… 6
5. Power ON/ OFF& Wake up ……………………………………………………………………………… 7
5.1 Power ON/ OFF ……………………………………………………………………………………………………… 7
5.2 Lock/Unlock screen ………………………………………………………………………………………………… 8
5.3 Sleep/Wake up ……………………………………………………………………………………………………… 8
6. Function/Modes introduction …………………………………………………………………………… 8
6.1 Follow modes introduction ……………………………………………………………………………………… 8
6.2 Other function introduction ……………………………………………………………………………………… 9
7. App Connecting ………………………………………………………………………………………… 10
7.1 Connect App ………………………………………………………………………………………………………… 10
7.2 Function introduction of Feiyu SCORP App …………………………………………………………………… 11
7.3 Function introduction of Feiyu ON App ………………………………………………………………………… 15
8. Operation ………………………………………………………………………………………………… 17
8.1 Button operation …………………………………………………………………………………………………… 17
8.2 Touch screen operation …………………………………………………………………………………………… 20
8.3 Function operation ………………………………………………………………………………………………… 23
8.4 Control ports ………………………………………………………………………………………………………… 28
9. Specications …………………………………………………………………………………………… 29
Introduction
Feiyu SCORP-Mini is a professional 3-axis handheld gimbal for mirrorless camera,
pocket camera, action camera, smartphone which developed by Guilin Feiyu
Technology Incorporated Company.
Feiyu SCORP-Mini is designed with button area, multifunction knob and touch
screen, which can switch follow modes, control the rotation, control focus motor
and the parameters settings by one hand. The camera shutter cable is equipped for
controlling the photo taking, video recording and focusing directly at handle.
Feiyu SCORP- Mini also come with camera control port and extension port, which
support to connect focus motor and other extension device.
Tutorial
·The tutorial videos can be watched at FeiyuTech ocial
website or scan the QR code.
https://www.feiyu-tech.com/play/
Download the App
When mounting mirrorless camera, pocket camera or action camera on gimbal for
shooting, please download "Feiyu SCORP".
When mounting smartphone on gimbal for shooting, please download "Feiyu ON".
Scan the QR code to download the app, or search for "Feiyu SCORP", "Feiyu ON" in
the App Store or Google Play.
* Feiyu SCORP: Requires iOS 10.0 or above, Android 6.0 or above.
Feiyu ON: Requires iOS 9.0 or above, Android 6.0 or above.
iOS Android
Feiyu SCORP Feiyu ON Feiyu SCORP Feiyu ON
- 1 -
1. Overview
* Not include camera.
[14]
[11]
[13]
[10]
[12]
[9]
[15] [16] [27]
[4]
[3]
[22]
[21]
[20]
[25] [26]
[28]
[18]
[17]
[5]
[19]
[8]
[2]
[24]
[23]
[1]
[29]
[6]
[7]
[1] Power button
[2] Trigger button
[3] F2 button
[4] Touch screen
[5] F1 button
[6] Shutter button
[7] Mode button
[8] Joystick
[9] FPV button
[10] Knob function
switching button
[11] Multifunction knob
[12] Slider lock
[13] Quick release plate safety lock
[14] Quick release plate
[15] Fixed plate slider
[16] Fixed plate
[17] Slide arm
[18] Roll axis
[19] Roll lock
[20] Tilt axis
[21] Tilt lock
[22] Cross arm
[23] Pan axis
[24] Pan lock
[25] Mounting hole for focus
motor support rod
[26] Slider safety lock
[27] Lens holder
[28] Versatile arm
[29] Handle
- 2 -
2. Getting started
2.1 Charging
Please fully charge the battery before power on the gimbal for the rst time.
Charging with USB 2.0 to Type-C cable, supports quick charge which charging
power ≤ 18W.
2.2 Adjust the gimbal to gimbal balancing position
The gimbal is folded by default, please unlock all the three axes and adjust the
gimbal to gimbal balancing position, and then lock the three axes.
1
2
3
Gimbal folded position Gimbal balancing position
- 3 -
3. Mounting the Camera/Smartphone
Take camera mounting as an example.
Before mounting the camera, make sure the camera is ready for shooting (Install the
camera lens, and the lens cover should be removed, the memory card and battery
needs to be inserted to the camera, and battery is fully charged) , complete all the
steps which mentioned in chapter "2. Getting started" and the gimbal is adjusted to
gimbal balancing position. Make sure the gimbal is powered o or in sleep mode
before mounting the camera.
3.1 Attach the quick release plate
Attach the quick release plate to camera by
tightening the screw.
If the camera doesn't have the 1/4-20 inch screw
hole, please put the camera on mount adapter,
which has 1/4-20 inch screw hole, and then
follow the steps above to mount it.
Users can mount smartphone into the optional
smartphone holder, and follow the steps above
to install it on the gimbal.
3.2 Install lens holder (Optional)
Install the lens holder on the quick release plate if needed, the rubber of the lens
holder must be directly under the lens. It is recommended to use the lens holder
when using a long or heavy lens.
- 4 -
3.3 Mount camera on gimbal
Unlock the quick release plate safety lock ①, install the plate with the mounted
camera into the slot ② in direction of icon, lock the safety lock ① once the camera is
roughly balanced. It is recommended to push the camera against the tilt axis. Unlock
the slider lock ③ to move the camera left or right according to camera's width, then
lock the slider lock ③.
1
!
2
3
3
4. Gimbal Balancing
Please balance the gimbal before shooting. Take camera
mounting as an example. Make sure the camera and lens are
ready for shooting, and the gimbal is powered o or in sleep
mode before balancing. It is recommended to hold up the
camera rst, then move the slide arm, cross arm and
vertical arm.
Tutorial Videos
- 5 -
4.1 Balancing the tilt axis
4.1.1 Balancing the vertical tilt
a. Unlock the tilt lock ① , and loosen the slide arm lock knob ②.
b. Rotate the tilt axis so that the camera lens is pointing upward. Check the direction
which the lens tilts to.
c. If the lens tilts to one side, then the camera is that side heavy, move the slide
arm ③ to the opposite direction, until the camera is steady pointing upward.
d. Tighten the slide arm lock knob ② while holding the camera.
3
2
1
4.1.2 Adjust depth for the tilt axis
a. Rotate the tilt axis so that the camera lens is pointing forward. Check the direction
which the lens tilts to.
b. If the lens tilts to one side, then the camera is that side heavy, unlock the quick
release plate safety lock ① and then move the quick release plate to the opposite
direction, until the camera is steady pointing forward.
c. Lock the quick release plate safety lock ① while holding the camera.
The tilt axis is balanced when the camera is steady while tilted up or down by 45° .
- 6 -
2
1
4.2 Balancing the roll axis
a. Unlock the roll lock ① , check the direction which the camera tilts to.
b. If the camera tilts to one side, then the camera is that side heavy, loosen the cross
arm lock knob ②and then move the cross arm to the opposite direction, until the
camera can stay still and horizontal to the ground.
c. Tighten the cross arm lock knob ②.
The roll axis is balanced when the camera can stay still and horizontal to the ground.
3
2
1
4.3 Balancing the pan axis
a. Unlock the pan lock ①. Hold the tripod, and tilt the gimbal forward until it is
horizontal to the ground.
b. If the camera tilts to one side, then the camera is that side heavy, loosen the
vertical arm lock knob ② and then move the vertical arm ③ to the opposite
direction, until the camera can stay still and horizontal to the ground.
c. Tighten the vertical arm lock knob ②.
The pan axis is balanced when the camera can stay still and horizontal to the ground.
- 7 -
3
1
2
5. Power ON/ OFF& Wake up
5.1 Power ON/ OFF
(1) Before power on the gimbal, make sure you have balanced gimbal, and
unlocked all the three axes.
(2) If you haven't unlocked all the 3 axes, gimbal will enter sleep mode to
protect itself. Please single tap power button to wake up gimbal after
unlocked all the 3 axes.
! Please set motor power rst after powering on gimbal for the rst time or after
changing a new camera/lens. (Please refer to chapter 8.3.1)
Long press the power button and release it when you hear the beep sound to power
on/ o.
Altri manuali per SCORP Mini
1
Indice
Altri manuali FeiYu Tech Accessori per fotocamere
FeiYu Tech
FeiYu Tech FY-G3 Ultra Manuale utente
FeiYu Tech
FeiYu Tech G4 Plus Manuale utente
FeiYu Tech
FeiYu Tech FY-G3 Ultra Manuale utente
FeiYu Tech
FeiYu Tech VB 4SE Manuale utente
FeiYu Tech
FeiYu Tech MG Lite Guida rapida
FeiYu Tech
FeiYu Tech G5 Manuale utente
FeiYu Tech
FeiYu Tech QING Manuale utente
FeiYu Tech
FeiYu Tech MG Manuale utente
FeiYu Tech
FeiYu Tech G6 Manuale utente
FeiYu Tech
FeiYu Tech SPG Manuale utente
FeiYu Tech
FeiYu Tech WG2 Manuale utente
FeiYu Tech
FeiYu Tech Feiyu-WCP2 Manuale utente
FeiYu Tech
FeiYu Tech G5 Manuale utente
FeiYu Tech
FeiYu Tech FY WG2 Manuale utente
FeiYu Tech
FeiYu Tech VIMBLE ONE Manuale utente
FeiYu Tech
FeiYu Tech VIMBLE 3 Manuale utente
FeiYu Tech
FeiYu Tech SCORP-C Manuale utente
FeiYu Tech
FeiYu Tech vimble 2 Istruzioni operative
FeiYu Tech
FeiYu Tech AKFI Manuale utente
FeiYu Tech
FeiYu Tech SPG 2 Manuale utente
