Fesing SSIF2P15S48100C Istruzioni per l’uso

LITHIUM

BATTERY

Application Manual

Read and follow these instructions!

The following precautions are intended to ensure your safety and prevent property damage. Before

installing this product, be sure to read all safety instructions in this document for proper installation.

Failure to comply with the instructions with this symbol may result in a

serious accident, causing death or a severe injury.

Failure to comply with the instructions with this symbol may result in a

serious accident, causing a severe injury.

Failure to comply with the instructions with this symbol may result in

minor or moderate injury.

Provides information considered important but not hazard-related.

The information relates to property damage.

Read instruction before use

Risk of electric shock

Operate as specified by the manual

This product is designed to an integrated system, which must be performed by a qualified person

trained in electrical engineering and familiar with the characteristics and safety requirements of

lithium batteries. Do not use this product if you are unsure if you possess the necessary skills to

complete this integration.

 
 
 
 
Table of Contents 
Precautions.................................................................................................................................4 
1 General Safety Precautions......................................................................................................4 
2 Installation Precautions.............................................................................................................4 
Product Introduction....................................................................................................................5 
1. Front Panel Function Introduction............................................................................................5 
2 Product Specifications ..............................................................................................................6 
3 State Indicator ..........................................................................................................................8 
Unpack the Battery......................................................................................................................8 
1 Parts List...................................................................................................................................9 
2 Visual Inspection of the Modules ............................................................................................10 
Battery Installation........................................................................................................................10 
1 Battery Module Installation......................................................................................................12 
Cable Connection.........................................................................................................................13 
1 Single Battery Connection ..................................................................................................13 
2 Connect Cables of the Multiple Batteries in Parallel................................................................17 
3 Visual Inspection of the Connection........................................................................................20 
Activate the Product.....................................................................................................................20 
1 Start the Battery......................................................................................................................20 
2 Monitoring the Battery.............................................................................................................20 
Inspection, Cleaning and Maintenance.........................................................................................22 
1 General Information................................................................................................................22 
2 Inspection...............................................................................................................................23 
3 Cleaning .................................................................................................................................23 
4 Maintenance...........................................................................................................................23 
5 Storage...................................................................................................................................23 
Troubleshooting ...........................................................................................................................24 
Battery recovery...........................................................................................................................25 
Transportation Requirements.....................................................................................................26 
 
 

1. Precautions

1.1 General Safety Precautions

The product provides a safe source of electrical energy when operated as intended and as designed.

Potentially hazardous circumstances such as excessive heat or electrolyte mist may occur under

improper operating conditions, damage, misuse and/or abuse. The following safety precautions and

the warning messages described in this part must be observed.

If any of the following precautions are not fully understood, or if you have any questions, contact us

for guidance.

Risks of explosion



Do not subject the battery to strong impacts.



Do not crush or puncture the battery.



Do not dispose of the battery in a fire.

Risks of fire



Do not expose the battery o temperatures in excess of 60℃.



Do not place the battery near a heat source such as a fireplace.



Do not expose the battery to direct sunlight.



Do not allow the battery connectors to touch conductive objects such as wires.

Risks of electric shock



Do not disassemble the battery.



Do not touch the battery with wet hands.



Do not expose the battery to moisture or liquids.



Keep the battery away from children and animals.

Risks of damage to the battery



Do not allow the battery to come into contact with liquids.



Do not subject the battery to high pressures.

1.2 Installation Precautions

Please be aware that a battery presents a risk of electrical shock including high short-circuit current.

Follow all safety precautions while operating the batteries.



Remove watches, rings, and other metallic accessories.



Use tools with insulated handles in order to avoid inadvertent short circuits.



Wear rubber gloves and safety boots.



Do not put tools or any metal parts on the top of the batteries.



Disconnect charging source and load before connecting or disconnecting terminals.



When moving batteries and wear all appropriate safety clothing and equipment.



Do not open or mutilate the batteries.

▪Verify polarity at all connections before energizing the system. Reverse

polarity at the battery terminals will void the Warranty and destroy the

batteries. Do not short circuit the batteries.

▪Do not combine Lithium Batteries with other brands or chemistries; Do

not mix Lithium Batteries from different installations, clients, or job sites.

▪Do not disassemble or modify the battery. If the battery housing is

damaged, do not touch exposed contents.

2. Product Introduction

48 V series lithium iron phosphate battery system has been designed to provide power backup for

remote or outside telecom plants like Access Terminals, Base Transceiver Stations, and Base

Station Controllers. This system has the characteristics of high system integration, well reliability,

long service life, and wide operating temperature range.

2.1. Front Panel Function Introduction

In order to operate the product correctly, please carefully view the function of the front panel of the

battery.

Figure 2-2: Front Panel Function Introduction

1. Reset: When the BMS is in the dormant state, press the button for 1S to activate the BMS.

Meanwhile, the LED indicator will be lit to show SOC of the battery. When the BMS is in the active

state, press the button for 3S to cause battery dormant. Then the LED indicator light will be lit from

"RUN" for 0.5 seconds.

2. ADD: DIP switch, used for setting the product communication address when communication

cascade;

3. SOC: These 4 LEDs are used to display the pack SOC. The lightning of these LEDs indicates the

SOC of 25%, 50%, 75%, and 100%. For example, when SOC >75%, all 4 LEDS will be light up. If

SOC> 50% and <75%, 3 LEDs will be light up. Etc.

4. ALM: Warning light;

5. RUN: Indicate the alarm or the run status of the battery.

6. RS485: Communication interface: Used for RS485/CAN communication;

7. RS232: Connect with upper computer for battery system debugging and software upgrade.

8. Handle: It was used to carry/move the battery.

9. Used for fixing with cabinet.

10. Positive output terminal.

11. Negative output terminal.

2.2 Product Specifications

Table 2-1: Product Specifications

Basic Parameters

Model

SSIF2P15S48100C

Anode Material

LiFePO4

Nominal Voltage（V）

Layout

15S1P

Rated Capacity（Ah）

100（0.5C，25℃）

Rated Energy（kWh）

4.8

Dimensions(W×D×H)mm

440×350×222（5U）

Weight（kg）

43.5(About)

Communication

RS485,CAN

Cycle Life

6000+（80%DOD,25℃）

Electrical Characteristics

Voltage Window（V）

40.5～54

Charge Current（A）

50(Recommend)

Max Charge Current（A）

100

Max Discharge Current（A）

100

Operation Environment

Charge Temperature（℃）

0℃～50℃（Optimum15℃～30℃）

Discharge Temperature（℃）

﹣20℃～50℃（Optimum5℃～45℃）

Storage Temperature（℃）

﹣20℃～55℃

Storage Humidity（RH）

5%～90%

Working Humidity（RH）

5%～90%

Protection Class

IP20

Products specifications described herein are subject to change without prior notification.

2.3 State Indicator

Table 2-2: State Indicator

System Mode

Abnormal event

RUN

ALM

Capacity LED



De-energized/

shutdown Mode

No light

All no light

Stand-by Mode

Normal

Flash 1

No light

Indicate the SOC

Alarm

Flash 1

Flash 2

Indicate the SOC

Charging

Normal

Light

No light

Indicate the SOC, the higher LED flash 2

Alarm

Light

Flush 2

Indicate the SOC, the higher LED flash 2

Over charge

protection

Light

No light

All light

Temp

protection

Flash 1

Flash 2

Indicate the SOC

Overcurrent,

fail protection

No light

Light

All no light

Discharging

Normal

Flash 3

No light

Indicate the SOC

Alarm

Flash 3

Flash 2

Indicate the SOC

Low voltage

protection

Flash 3

No light

All no light

Overcurrent,

Short Circuit

protection

No light

Light

All no light

Failure

No light

Light

All no light

Flush 1: Light 0.25s and no light 3.75s; Flash 2: Light 0.50s and no light 0.50s;

Flush 3: Light 0.50s and no light 1.50s

3. Unpack the Battery

The battery and the related accessories are packed in the carton box and steel belt wooden box. Use

tools to open the packing box. After open the packing box, confirm the product components

according to the parts list.

3.1 Parts List

Check the parts during unpacking.

Table 3-1: Parts Lists

No.

Items

Appearance

Usage

Remarks

Battery

Provide power

Positive output

cable

Connect the battery and

inverter

Negative output

cable

Connect the battery and

inverter

RS485

communication

line

Apply to Modbus

protocol. Connect the

battery and the

computer.

Used to

monitor and

debug the

battery

RS485

communication line

Battery cascade line.

Connect the RS485

communication interface

between the adjacent

battery

Standard

RJ45

network

cable

Violent unpacking is strictly prohibited. If the battery system is found to be

broken, deformed or other abnormal conditions, the user shall immediately

stop using the battery and contact us.

Cabinet bolt

Fix the battery on the

rack or cabinet

Table 3-2: Recommended Tools andInstruments

No.

Items

Usage

Appearance

Phillips Screwdriver or Bit

To fasten battery and

assemblies

Box Cutter

Opening boxes

Insulated TorqueWrench

Installing cables and busbars

Insulated Sockets

Installing cables and busbars

Battery Tester

Measure battery module’s

voltage

3.2 Visual Inspection of the Modules

After transporting the modules to the installation location, check for:



Physical damage to the exterior



Damaged or protruding screws

4. Battery Installation

This system must be installed by qualified, trained workers familiar with the required instruments.

The battery can be used in indoor environments where the ambient temperature and humidity are not

controlled where the humidity can reach 90%.

Indice

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente

fesing SSIF2P15S48100C Istruzioni per l’uso

Manuali Unità di controllo popolari di altre marche