Fiio K3 Manuale utente
1
K3
Complete User manual
2
1、Product introduction
K3 is a multi-function USB DAC for PC-HiFi. Being connected to a
computer, it can work such as USB decoding, USB digital interface, audio
decoding and amplification, etc.
Product features：
Dual USB AUDIO mode
Flagship decoding capability PCM384k/DSD256
RGB work indicator
Dual headphone outputs, dual digital audio outputs
ADC type volume control
List of items included in package（please check to make sure that
all items are included）
1) USB A-Type C cable 1pc
2) Spare foot pad 4pcs
3) Quick user guide 1pc
4) Warranty card 1pc
(Note: The products, accessories, user interface and other illustrations in the
manual are schematic and are for reference only. Due to product updates and
upgrades, the actual product and schematic diagram may be slightly different.
Please refer to the actual product.)
3
2、Ports and indicators explained:
①2.5mm balanced headphone output interface：Connect a 2.5mm
earphone to this jack, balance the boost function will be started up
automatically, which can improve the output power by about 50%.
②3.5mm single-ended headphone output interface ：Connect a
3.5mm headset to this jack
③Bass boost switch：When the switch is turned to the left, bass boost is
OFF; and switch to the right, the bass boost is ON;
④Low/high gain switch: When the switch is turned to the left, it means
low gain, the switch to the right means high gain, and the high gain can
be adjusted based on different types of headphones;
4
⑤RGB indicator: This light is located next to the power/volume knob.
While playing music, the indicator will display different colors according
to the sampling rate.
⑥Power/Volume knob: Turn the knob clockwise to stop and turn the
power on, then continue to rotate to increase the volume. Turn
counterclockwise to decrease the volume, continue to rotate and hear
the beep and turn off the power. When the power is off, the white dot on
the knob points to the RGB light;
⑦Linear output: Directly driven by OPA1612, to ensure the high quality
of sound reproduction, suitable for speakers, amps, decoders, etc.;
⑧USB mode selection switch: When the switch is set to 1.0, it is USB
Audio 1.0 drive-free mode, when the switch is dialed to 2.0, it represents
USB Audio 2.0 drive mode;
⑨Type C USB interface: Connect the computer (Windows system or OS
system) to get power to K3. The audio input must use this port;
⑩COAX OUT: Coaxial output port, this digital output port is used to
connect speakers, amplifiers or decoders with coaxial input;
⑪OPT OUT: Optical output port for connecting speakers, amplifiers or
decoders with optical input.
5
3, the usage steps
Step 1, select the appropriate USB mode and connect to the
computer with the data cable
USB Audio 1.0, decoding sampling rate can reach 96k/24bit, no
need to drive
After connecting the data cable, turn the power/volume knob
clockwise until you hear a click and the device turns on.
Select the K3 device on the computer side.
USB Audio 2.0, decoding sampling rate can reach 384k/DSD256,
driver needs to be install in Windows.
After connecting the data cable, turn the power/volume knob
clockwise until you hear a click and turn the device on.
For the MAC computer, there is no need to install the driver, but
need to select K3 as sound device in Mac.
6
For Windows system computers, please go to FiiO official website to
download and install USB driver, download link www.fiio.com/q1mkiifaq,
driver installation tutorial please see Appendix 1 of this document, select
K3 as output device on the computer.
How to select K3 as sound device:
For example, Windows 7 system, right click on the desktop taskbar
volume icon, then select the playback device to enter the "sound"
management interface, finally Choose speaker “FiiO Q-series” as
default.
note：
USB mode(1.0 to 2.0) switch needs to re-plugged and connected
to the computer
Because K3 needs power from the source, and power supply and
data translate share the same slot, it is designed for desktop
computers or notebooks. Mobile devices are not recommended.
When the phone is turned on or plugged in, the indicator light
will flash then keep ON.
When K3 is turned off or disconnected, the indicator will be off.
Step 2, select output jack according to the usage scene
7
Scene 1: Connect to the headset using a 2.5mm or 3.5mm port
note：
When both headphone jack and a BAL jack are plugged in, only the
BAL jack will be valid;
If you want to use the 3.5mm headphone jack, please unplug the
2.5mm balanced jack device;
8
Scene 2: Connect to active speaker or amplifier with a 3.5mm audio
cable
note：
line out is controlled by the power/volume knob and can work with
2.5mm/3.5mm output at the same time ; but recommend to eject the
2.5mm/3.5mm headphones while using the line out.
9
Scene 3: Connect to the amplifier with coaxial input
note：
The coaxial output supports up to 192k sampling rate and DOP
output of DSD64. If the device does not support, please adjust the
audio output settings of the PC player;
Power/volume knob adjustment is invalid to the coaxial output
volume.
10
Scene 4: Connect to the device with optical input port
note：
The coaxial output supports up to 192k sampling rate and DOP
output of DSD64. If the device does not support, please adjust the
audio output settings of the PC player;
Power/volume knob adjustment is invalid to the optical output
volume.
Step 3, play the song on the computer using the music app
First select K3 as the output device in the playback settings of the
playback software. Take FB2000 as an example. Appendix document 2 is
for reference. Then play the music and adjust the power/volume knob to
Indice
Manuali Interfaccia USB popolari di altre marche
PASCO
PASCO SCIENCEWORKSHOP 750 Manuale utente
Phonic
Phonic FIREFLY 302 USB Manuale utente
OHAUS
OHAUS Scout STX Series Manuale utente
Denon
Denon DN-HC4500 - DJ Mixer USB Controller Manuale utente
Lutron Electronics
Lutron Electronics Stanza SZ-CI-USB-CPN5138 Manuale utente
Paradox
Paradox PMC5-TI00 Manuale utente
