Fike FIK-RVM Manuale utente

PN LS10311-000FK-E:A 03/04/2021 ECN: 2890

FIK-RVM

Remote Voice Module

FIKE CORPORATION

704 SW 10th Street

Blue Springs, MO 64015

www.fike.com

1 Description

The FIK-RVM Remote Voice Module is contained within the FIK-LOC or FIK-2100LOC Local Operator Console. It provides a supervised micro-

phone to be used for live communication and operates as an interface for the Emergency Communication System.

1.1 Compatibility

The FIK-RVM is compatible with the following Fike Series, Fire Alarm Control Panels (FACPs).

For information on the programming, the DIP switch settings, the addressing and the wire connections, refer to following FACP Installation Manuals.

The documents are located on the Fike Series website, www.fike.com.

1.2 Specifications

The following list the specifications.

2 Board Layout and Mounting

1. Open the cabinet door and the dead front panel.

2. Remove the AC power and disconnect the backup batteries from the Main Control Panel.

3. Mount the FIK-RVM in the middle section of the dead front on the six mounting studs. See Figure 1.1.

Figure 1.1 FIK-RVM Back View

NOTE: The installation and wiring of this device must be done in accordance with the NFPA 72 and the local ordinances.

• FCP-2100ECS • FCP-300ECS

Document Document Part Number

FCP-2100ECS Manual LS10143-002FK-E

FCP-300ECS Manual LS10145-002FK-E

• Standby Current: 60mA

• Alarm Current: 80mA

SBUS address

DIPs

dead front panel

mounting holes

SBUS

VBUS1

Audio

AUX

Input

AUX

Audio

Trigger

VBUS2

2FIK-RVM Product Installation Document — P/N LS10311-000FK-E:A 03/04/2021

3 Wiring to a FACP

To properly wire the FIK-RVM to the FACP SBUS, see Figure 1.2.

Figure 1.2 Wiring the FIK-RVM to the FACP

supervised

power-limited

FIK-RVM

FIK-RVM Product Installation Document — P/N LS10311-000FK-E:A 03/04/2021 3

3.1 Microphone Installation

1. Clip the microphone into the microphone clip. See Figure 1.3.

Figure 1.3 Hang Microphone into the Microphone Clip

2. Insert the microphone cord through the hole at the bottom of

the dead front panel. See Figure 1.4.

Figure 1.4 Microphone Cord Inserted Through the Dead Front

Panel Hole

3. Attach the strain relief clip to the microphone cord. The strain

relief clip should have about 2¾”(6.98cm) of the microphone

cord through it. See Figure 1.5.

4. Push the strain into the hole in the dead front panel.

5. Connect to the FIK-RVM board.

6. Restore the AC power and reconnect it to the backup batteries.

Figure 1.5 Strain Relief Clip Installation

microphone

clip

2 3/4” (6.98cm)

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fike Unità di controllo

Fike

Fike FIK-CR-6 Manuale utente

Fike

Fike TWINFLEX SRM 100-0010 Manuale utente

Fike

Fike MICROMIST 10-2340 Manuale utente

Fike

Fike FIK-M500M Manuale utente

Fike

Fike FAV Manuale utente

Fike

Fike TWINFLEX IRM 100-0011 Manuale utente

Fike

Fike FIK-IM-10 Manuale utente

Fike

Fike EIV Manuale utente

Fike

Fike 55-043 Manuale utente

Fike

Fike 55-046 Manuale utente

Fike

Fike Lantronix XPort 10-2627 Istruzioni operative

Fike

Fike P Manuale di servizio

Fike

Fike FIK-FML Manuale tecnico

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente