Fluke 106 Manuale utente
June 2013, Rev. 1,10/15
© 2013-2015 Fluke Corporation. All rights reserved. Specifications are subject to change without notice.
All product names are trademarks of their respective companies.
106/107
Digital Multimeters
Users Manual
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
i
Table of Contents
Title Page
Introduction...............................................................................................................1
How to Contact Fluke...............................................................................................1
Safety Information ....................................................................................................2
Instrument Overview.................................................................................................8
Terminals..............................................................................................................8
Display..................................................................................................................9
Auto Power Off .........................................................................................................10
Auto Backlight Off.....................................................................................................11
Measurements..........................................................................................................11
Data Hold .............................................................................................................11
Measure AC and DC Voltage...............................................................................12
Measure AC or DC Current..................................................................................14
Measure Resistance.............................................................................................16
Test for Continuity ................................................................................................16
Test Diodes (107 Only) ........................................................................................18
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
106/107
Users Manual
ii
Measure Capacitance...........................................................................................19
Measure Frequency and Duty Cycle (107 Only) ..................................................19
Maintenance.............................................................................................................20
General Maintenance ...........................................................................................21
Test the Fuse........................................................................................................22
Replace Batteries and the Fuse ...........................................................................22
Service and Parts .....................................................................................................24
General Specifications..............................................................................................25
Accuracy Specifications............................................................................................28
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
Digital Multimeters
Safety Information
3
Warning
To prevent possible electrical shock, fire, or personal injury:
•Carefully read all instructions.
•Read all safety information before you use the Product.
•Use the Product only as specified, or the protection supplied by the Product
can be compromised.
•Do not use the Product around explosive gas, vapor, or in damp or wet
environments.
•Do not use the Product if it is damaged.
•Disable the Product if it is damaged.
•Do not use the Product if it operates incorrectly.
•Examine the case before you use the Product. Look for cracks or missing
plastic. Carefully look at the insulation around the terminals.
•Use only correct measurement category (CAT), voltage, and amperage rated
probes, test leads, and adapters for the measurement.
•Measure a known voltage first to make sure that the Product operates
correctly.
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
106/107
Users Manual
4
•Do not use test leads if they are damaged. Examine the test leads for damaged
insulation and measure a known voltage.
•Do not apply more than the rated voltage, between the terminals or between
each terminal and earth ground.
•Do not use the HOLD function to measure unknown potentials. When HOLD is
turned on, the display does not change when a different potential is measured.
•Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
•Keep fingers behind the finger guards on the probes.
•Remove all probes, test leads, and accessories before the battery door is
opened.
•Do not exceed the Measurement Category (CAT) rating of the lowest rated
individual component of a Product, probe, or accessory.
•Remove the input signals before you clean the Product.
•Have an approved technician repair the Product.
•Remove the batteries if the Product is not used for an extended period of time,
or if stored in temperatures above 50 °C. If the batteries are not removed,
battery leakage can damage the Product.
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
Digital Multimeters
Safety Information
5
•Replace the batteries when the low battery indicator shows to prevent
incorrect measurements.
•Use only specified replacement parts.
•Use only specified replacement fuses.
•Limit operation to the specified measurement category, voltage, or amperage
ratings.
•Do not use test leads if they are damaged. Examine the test leads for damaged
insulation and measure a known voltage.
•Do not use in CAT III or CAT IV environments without the protective cap
installed. The protective cap decreases the exposed probe metal to <4 mm.
This decreases the possibility of arc flash from short circuits.
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
106/107
Users Manual
6
Table 1 is a list of the symbols used on the Product and in this manual.
Table 1. Symbols
Consult user documentation. WARNING. RISK OF DANGER.
Static awareness. Static discharge
can damage part(s). WARNING. HAZARDOUS VOLTAGE.
Risk of electric shock.
AC (Alternating Current) Earth
DC (Direct Current) Capacitance
Both direct and alternating current Diode
Battery Fuse
Conforms to relevant South Korean
EMC Standards Certified by TÜV SÜD Product Service.
Conforms to European Union
directives. Certified by CSA Group to North American
safety standards.
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
Digital Multimeters
Safety Information
7
Table 1. Symbols (cont.)
Measurement Category II is applicable to test and measuring circuits connected directly to
utilization points (socket outlets and similar points) of the low-voltage MAINS installation.
Measurement Category III is applicable to test and measuring circuits connected to the
distribution part of the building’s low-voltage MAINS installation.
Measurement Category IV is applicable to test and measuring circuits connected at the
source of the building’s low-voltage MAINS installation.
This product complies with the WEEE Directive marking requirements. The affixed label
indicates that you must not discard this electrical/electronic product in domestic household
waste. Product Category: With reference to the equipment types in the WEEE Directive
Annex I, this product is classed as category 9 "Monitoring and Control Instrumentation"
product. Do not dispose of this product as unsorted municipal waste.
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
106/107
Users Manual
8
Instrument Overview
Terminals
1 2 3
hhc01.eps
Item Description
Input terminal for ac and dc current measurements to 10 A and current frequency (107 only)
measurements.
Common (return) terminal for all measurements.
Input terminal for voltage, resistance, continuity, diode (107 only), capacitance, and
frequency (107 only) measurements.
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
Digital Multimeters
Instrument Overview
9
Display
Figure 1 and Table 2 show the items on the Product display.
1 2 3 4 5 6 7 8
9
10
11
12
1314
hhc02.eps
Figure 1. Display
Shop for Fluke products online at: 1.888.610.7664
www.MyFlukeStore.com
Altri manuali per 106
5
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Fluke Multimetro
Fluke
Fluke 117 Manuale utente
Fluke
Fluke 771 Manuale per l'uso e la cura
Fluke
Fluke 76 Manuale utente
Fluke
Fluke 76 Istruzioni per il montaggio
Fluke
Fluke 8050A Manuale utente
Fluke
Fluke 8505A Manuale utente
Fluke
Fluke Digital Multimeter Manuale per l'uso e la cura
Fluke
Fluke 233 Manuale utente
Fluke
Fluke 8508A Manuale utente
Fluke
Fluke 8845A Manuale utente
Fluke
Fluke 110 Manuale utente
Fluke
Fluke 8060A Manuale utente
Fluke
Fluke 373 Manuale utente
Fluke
Fluke 867B Manuale utente
Fluke
Fluke Ti30 Manuale utente
Fluke
Fluke 110 Manuale per l'uso e la cura
Fluke
Fluke 114 Manuale per l'uso e la cura
Fluke
Fluke 106 Manuale utente
Fluke
Fluke 8845A Manuale utente
Fluke
Fluke 233 Manuale utente
Manuali Multimetro popolari di altre marche
PeakTech
PeakTech 4000 Manuale per l'uso e la cura
YOKOGAWA
YOKOGAWA 90050B Manuale utente
Gossen MetraWatt
Gossen MetraWatt METRALINE DMM16 Manuale utente
Tempo Communications
Tempo Communications MM200 Manuale utente
Elenco Electronics
Elenco Electronics CM-1555 Manuale utente
Mastech
Mastech MS8238C Manuale utente
