Fluke 8808A Guida alla configurazione

Altri manuali per 8808A

6

Indice

Manuali Multimetro popolari di altre marche

Agilent Technologies

Agilent Technologies 34420A Manuale utente

Hameg

Hameg HM 8012 Manuale utente

Mastech

Mastech MY70 Manuale utente

Steren

Steren MUL-300 Manuale utente

Somogyi Elektronic

Somogyi Elektronic home SMA 92 Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRAmax 6 Manuale utente

PeakTech

PeakTech 4000 Manuale per l'uso e la cura

YOKOGAWA

YOKOGAWA 90050B Manuale utente

Gossen MetraWatt

Gossen MetraWatt METRALINE DMM16 Manuale utente

Tempo Communications

Tempo Communications MM200 Manuale utente

Elenco Electronics

Elenco Electronics CM-1555 Manuale utente

Mastech

Mastech MS8238C Manuale utente

SDAR

SDAR 830A, 830B, 830D, 830C Manuale utente

RS PRO

RS PRO RS-9519BT Manuale utente

BGS technic

BGS technic 8890 Manuale utente

Amprobe

Amprobe Hexagon 60 Manuale utente

Morris

Morris 57074 Manuale utente

Agilent Technologies

Agilent Technologies 34450A 5 Digit Multimeter Manuale utente

Manual Supplement

© 2010-2012 Fluke Corporation. All rights reserved. 



Manual Title: 8808A Calibration Supplement Issue: 4

Print Date: October 2008 Issue Date: 12/12

Revision/Date: Page Count: 2

This supplement contains information necessary to ensure the accuracy of the

above manual. This manual is distributed as an electronic manual on the

following CD-ROM:

CD Title: 8808A

CD Rev. & Date: 3, 12/2009

CD PN: 2713002

.

8808A Calibration Manual Supplement

9/11 1

Change #1

On page 3-11, replace Table 3-8 with the following:

Table 3-8. Frequency Verification Steps

Nominal Input Range 90-Day Test Limit 1-Year Test Limit

Ampl. Freq. High Low High Low

0.1 V 20 Hz 2000 Hz 20.04 Hz 19.96 Hz 20.06 Hz 19.94 Hz

0.1 V 50 Hz 2000 Hz 50.02 Hz 49.98 Hz 50.03 Hz 49.97 Hz

0.1 V 1900 Hz 2000 Hz 1900.24 Hz 1899.76 Hz 1900.26 Hz 1899.74 Hz

0.1 V 19 kHz 20 kHz 19.0023 Hz 18.9977 Hz 19.0025 Hz 18.9975 Hz

0.1 V 195 kHz 200 kHz 195.024 Hz 194.977 Hz 195.026 Hz 194.975 Hz

0.1 V 1000 kHz 1000 kHz 1000.14 Hz 999.86 Hz 1000.16 Hz 999.84 Hz

Change #2

On page 2-6, replace the Current-Input Fuses section with the following:

Current-Input Fuses

The 200 mA and 10 A inputs are protected by user-replaceable fuses.

The 200 mA input is protected by a fuse (F1) rated at 440 mA, 1000 V (fast blow), 10,000 A

minimum breaking capacity.

The 10 A input is protected by a fuse (F2) rated at 11 A, 1000 V (fast blow), 10,000 A

minimum breaking capacity.

Current Input Fuse Table

F1 F1 - Fuse, 11 A, 1000 V, Fast blow or equivalent 803293

F2 F2 - Fuse, 440 mA, 1000 V, Fast blow or equivalent 943121

On page 2-6, under the first Warning replace step 3 with:

Press to set the range to 200 .

On page 2-6, under the second Warning replace step 5 with:

5. Remove the defective fuse and replace it with a fuse of an appropriate rating. See the Current

Input Fuse Table

Manual Supplement 8808A Calibration

2 12/12

Change #3, 64137, 64189

On page 1-4, add the following to the Symbols, table:

Conforms to relevant South Korean EMC Standards.

Conforms to CAN/CSA-C22.2 No. 61010-1, second edition,

including Amendment 1.

On page 1-9, add Electromagnetic Environment and replace Safety and EMC with:

Safety ................................................................ IEC 61010-1, 600 V CAT II / 1000 V CAT I, Pollution Degree 2

Electromagnetic Environment.............. IEC 61326-1, Basic

EMC.................................................................... Applies to use in Korea only. Class A Equipment (Industrial Broadcasting &

Communication Equipment) [1]

[1] This product meets requirements for industrial (Class A)

electromagnetic wave equipment and the seller or user should take

notice of it. This equipment is intended for use in business

environments and is not to be used in homes.