Fluke 718-100US Manuale utente

718 Series

Pressure Calibrator

Users Manual

July 1998 Rev. 4, 3/06

All product names are trademarks of their respective companies.

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

Table of Contents

Title Page

Introduction..................................................................................................................... 1

Safety Information .......................................................................................................... 2

Getting Acquainted with the Calibrator ........................................................................... 6

Power Saver.............................................................................................................. 6

Switch Test..................................................................................................................... 8

Zeroing with Absolute Pressure Modules ....................................................................... 9

Calibrating a P/I Transmitter........................................................................................... 10

Using the Internal Pump ............................................................................................ 10

Pump Valve Assembly Cleaning Instructions ................................................................. 15

Using an External Pump................................................................................................. 16

External Fluke Pressure Module Compatibility ............................................................... 18

Sourcing Loop Voltage ................................................................................................... 19

Percent Error Setup........................................................................................................ 19

Maintenance................................................................................................................... 20

In Case of Difficulty.................................................................................................... 20

Cleaning .................................................................................................................... 20

Calibration ................................................................................................................. 20

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

718 Series

Users Manual

Replacing the Batteries ............................................................................................. 21

Parts and Accessories ................................................................................................... 22

Specifications................................................................................................................. 25

Pressure Sensor Input .............................................................................................. 25

Pressure Module Input .............................................................................................. 25

DC mA Input ............................................................................................................. 25

Loop Supply .............................................................................................................. 25

General Specifications .............................................................................................. 26

How to Contact Fluke..................................................................................................... 27

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

iii

List of Tables

Table Title Page

1. Input Units ............................................................................................................................. 2

2. Safety Information ................................................................................................................. 3

3. International Electrical Symbols............................................................................................. 5

4. Pushbutton Functions............................................................................................................ 7

5. Pump Features...................................................................................................................... 10

6. Recommended Pressure Modules ........................................................................................ 14

7. Fluke Pressure Module Compatibility .................................................................................... 18

8. Replacement Parts................................................................................................................ 22

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

List of Figures

Figure Title Page

1. Connection Technique........................................................................................................... 5

2. Front Panel Features............................................................................................................. 6

3. Pump Features...................................................................................................................... 9

4. Internal Pressure Sensor with Internal Pump ........................................................................ 12

5. Pressure Module with Internal Pump..................................................................................... 13

6. Pressure Module with External Pump.................................................................................... 17

7. Sourcing Loop Voltage .......................................................................................................... 19

8. Battery Replacement............................................................................................................. 21

9. Replacement Parts................................................................................................................ 24

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

Pressure Calibrator

Introduction

The Fluke 718 Series Pressure Calibrators do the

following:

•Calibrate P/I (pressure to current) transmitters

•Measure pressure via a 1/8-inch NPT pressure fitting

and an internal pressure sensor or via a Fluke 700

Series Pressure Module

•Source pressure

•Measure current up to 24 mA

•Simultaneously display pressure and current

measurements.

•Supply loop voltage

•Calculate mA percentage in Percent Mode

•Calculate mA error % in Percent Error Mode

The 718 Pressure Calibrators (hereafter, “the Calibrator”)

include:

•718 1G

•718 30G

•718 100G

•718 300G

The Calibrator makes 5-digit pressure readings in the

following units: psi, inH2O at 4 °C, inH2O at 20 °C, kPa,

cmH2O at 4 °C, cmH2O at 20 °C, bar, mbar, kg/cm2, inHg,

and mmHg.

Pressure sensor specifications are as listed under

“Pressure Sensor Input”.

The Calibrator measures pressure sensor inputs in the

units shown in Table 1.

For pressure modules, full scale readings for all pressure

ranges can be made in psi, kPa, and inHg units. To avoid

display overflow, full scale readings are limited to 1000 psi

in cmH2O, mbar, and mmHg units, and 3000 psi in inH2O

units. Pressures of at least 15 psi must be measured for

meaningful readings in bar and kg/cm2units.

Your Calibrator is supplied with a holster, two installed 9 V

alkaline batteries, one set of TL75 test leads, one set of

AC70A alligator clips, one 700-ILF In-Line Filter (to protect

the pump), a Product Overview Manual, and a CD-Rom.

If the Calibrator is damaged or something is missing,

contact the place of purchase immediately. Contact your

Fluke distributor for information about accessories. See

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

718 Series

Users Manual

“How to Contact Fluke.” To order replacement parts or

spares, see “Parts and Accessories.”

Table 1. Input Units

Displayed Pressure Units

psi

inH2O at 4°C

inH2O at 20°C

cmH2O at 4°C

cmH2O at 20°C

bar

mbar

kPa

inHg

mmHg

kg/cm2

Safety Information

Use the Calibrator only as specified in this Users Manual,

otherwise the protection provided by the Calibrator may be

impaired.

A Warning identifies conditions and actions that pose

hazard(s) to the user; a Caution identifies conditions and

actions that may damage the Calibrator or the equipment

under test.

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

Pressure Calibrator

Safety Information

Table 2. Safety Information

XW Warning

To avoid possible electric shock or personal injury:

•Never apply more than 30 V between the mA terminals, or between either of the mA terminals and earth

ground.

•Do not use the Calibrator to make measurements in a CAT II, CAT III, or a CAT IV environment.

CAT I equipment is designed to protect against transient from high-voltage, low-energy sources, such

as electronic circuits or a copy machine

•Remove the test leads from the Calibrator before you open the battery door.

•Make sure the battery door is closed and latched before you operate the Calibrator.

•Do not operate the Calibrator if it is damaged.

•Do not operate the Calibrator around explosive gas, vapor, or dust.

•When using probes, keep fingers behind the finger guards on the probes.

•Use only two 9 V batteries, properly installed in the Calibrator case, to power the Calibrator.

•Follow all equipment safety procedures.

•Turn off circuit power before connecting the Calibrator mA and COM terminals in the circuit. Place

Calibrator in series with the circuit.

•When servicing the Calibrator, use only specified replacement parts.

•Do not allow water inside the case.

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

718 Series

Users Manual

Table 2. Safety Information (cont.)

XW Warning

•To avoid false readings, which could lead to possible electric shock or personal injury, replace the

battery as soon as the battery indicator Bappears.

•To avoid a violent release of pressure in a pressurized system, shut off the valve and slowly bleed off

the pressure before you attach or detach the internal pressure sensor or pressure module fitting to the

pressure line.

•To avoid over pressure damages, do not apply pressure that exceeds the limits listed in the Pressure

Specifications table in the “Specifications” section.

•To avoid mechanically damaging the Calibrator, do not apply torque between the pressure fitting and

the Calibrator case. See Figure 1 for the proper use of tools.

•To avoid misleading readings, disconnect the pressure module connector at the Calibrator.

•To avoid damage to the pressure module, refer to the related Instruction Sheet.

•To avoid damage to the pump, use with dry air and non-corrosive gases only. Check test leads for

continuity before using. Inspect Calibrator for cracks or damage, do not use the probes if they are

damaged or show high resistance.

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

Pressure Calibrator

Safety Information

Hold in

fixed

position

wh001f.eps

Figure 1. Connection Technique

Table 3. International Electrical Symbols

Symbol Meaning

J Earth ground

I Fuse

M Battery

W Refer to this instruction sheet for

information about this feature.

X Hazardous voltage. Risk of electric

shock.

T Double insulated

) Conforms to relevant Canadian

Standards Association directives.

P Conforms to relevant European Union

directives

f Pressure

Shop for Fluke products online at: 1.888.610.7664

www.MyFlukeStore.com

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Fluke Apparecchiature di prova

Fluke

Fluke T100 Manuale utente

Fluke

Fluke 5730A/03 Manuale utente

Fluke

Fluke 700G Series Manuale di istruzioni

Fluke

Fluke SPOT Light Manuale utente

Fluke

Fluke 810 Manuale utente

Fluke

Fluke 714 Manuale utente

Fluke

Fluke 1625 Manuale utente

Fluke

Fluke 6109A Manuale utente

Fluke

Fluke 9100 Series Manuale di istruzioni

Fluke

Fluke 6200-2 Manuale utente

Fluke

Fluke 975 AirMeter Manuale utente

Fluke

Fluke BT5300 Series Manuale utente

Fluke

Fluke MS2-100-IE Manuale utente

Fluke

Fluke CertiFiber Manuale utente

Fluke

Fluke 1664 FC Manuale utente

Fluke

Fluke 810 Manuale utente

Fluke

Fluke ScopeMeter 190-104 Manuale di istruzioni

Fluke

Fluke 5730A Manuale utente

Fluke

Fluke TP1000 Istruzioni originali

Fluke

Fluke DTX Series Manuale utente

Fluke

Fluke 1662 Manuale utente

Fluke

Fluke 71 Series Manuale per l'uso e la cura

Fluke

Fluke 712C Manuale utente

Fluke

Fluke 1652C Manuale per l'uso e la cura

Manuali Apparecchiature di prova popolari di altre marche

SMART

SMART KANAAD SBT XTREME 3G Series Manuale utente

Agilent Technologies

Agilent Technologies BERT Serial Manuale utente

Agilent Technologies

Agilent Technologies N3280A Manuale utente

Vernier

Vernier Go Direct Voltage Manuale utente

Lifeloc

Lifeloc R.A.D.A.R. Manuale utente

Mercury

Mercury TSL01 Manuale utente

MAHA

MAHA MBT Series Manuale utente

Fuji Electric

Fuji Electric P-61 Manuale utente

ETC

ETC SealerAtor Manuale utente

Skyfine

Skyfine ETHYWAY V2 Manuale utente

Appion

Appion G5 Twin Manuale utente

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuale utente

BW Technologies

BW Technologies MicroDock II Manuale utente

Sun Nuclear

Sun Nuclear 1027 Manuale utente

Biomark

Biomark HPR LITE READER Manuale utente

Hioki

Hioki 3169-20 Manuale utente

Ashcroft

Ashcroft ATE-100 Manuale utente

Rohde & Schwarz

Rohde & Schwarz RTA4000 Manuale utente