Flying Industry Development S1F2-DC06 Manuale utente

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver

This is the DC motor controller. The DC motor controller can remote control one DC motor (DC6V/9V/12V/24V) rotates in positive/ reversal

direction. You can connect two restrictive switches to receiver and use them to stop motor rotation.

Package Include:

1 x Receiver: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24

2 x Transmitter: CWC-3

1 x User manual

Features:

Wireless control, easy to install

Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with

voltage DC6V / 9V / 12V / 24V.

You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the

wireless signal can pass through walls, floors and doors.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/several transmitters can control one/several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No: S1F2-DC06 / S1F2-DC09 / S1F2-DC12 / S1F2-DC24

Coding Type: Fixed code or learning code

Coding Setting: By learning

Power Supply (Operating Voltage): DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)

Output: DC6V (S1F2-DC06), DC9V±1V (S1F2-DC09), DC12V±1V (S1F2-DC12), DC24V±1V (S1F2-DC24)

Case Size: 74mm x 54mm x 28mm

Quiescent Current: 5mA

Rated Current: 5A

The Maximum Instantaneous Current of Starting Motor: 10A

Transmitter:

Model No.: 0021102(CWC-3)

Channel: 3 CH

Waterproof

Remote Control Distance: 50m / 300ft (theoretically)

Encode: Fixed code by soldering

Unit Size: 58mm x 30mm x 12mm

Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Power supply:

Connect power supply DC6V / 9V / 12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”. You can exchange the output wires of

motor to change the rotating direction of motor.

Setting control mode Latched: Connect Jumper S1

Function of transmitter:

Press button ▲on remote: terminal “Output” output DC power, motor rotates in positive direction.

Press button ▼on remote: terminal “Output” output DC power, motor rotates in reversal direction.

Press button on remote: motor stops.

Function of manual buttons in receiver:

Press button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction.

Press button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction.

Press button K2 in receiver: motor stops.

Setting control mode Momentary: Connect Jumper S2

Function of transmitter:

Press and hold button ▲on remote: terminal “Output” output DC power, motor rotates in positive direction. Release button: motor stops.

Press and hold button ▼on remote: terminal “Output” output DC power, motor rotates in reversal direction. Release button: motor stops.

Function of manual buttons in receiver:

Press and hold button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction. Release button: motor stops.

Press and hold button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction. Release button: motor stops.

Restrictive function:

You can connect two restrictive switches to terminals “X1” and “X2”, if the restrictive switch X1 or X2 is connected, the motor will work normally; if

the restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1” is connected, the

motor will work in reversal direction; when the restrictive switch “X1” is disconnected, motor will stop automatically. When the restrictive switch

“X2” is connected, the motor will work in positive direction; when the restrictive switch “X2” is disconnected, motor will stop automatically.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

When you don't want to use the restrictive switches, you need to connect the terminals “X1” and “X2” by two wires.

Learning the button of transmitter:

1) Press and hold “K3”button of receiver; when signal LED on the receiver is on, release “K3”button. Press ▲button of transmitter within 5

seconds, if the signal LED off, that means learning is successful.

2) Press and hold “K1”button of receiver; when signal LED on the receiver is on, release “K1”button. Press ▼button of transmitter within 5

seconds, if the signal LED off, that means learning is successful.

3) Press and hold “K2”button of receiver; when signal LED on the receiver is on, release “K2”button. Press button of transmitter within 5

seconds, if the signal LED off, that means learning is successful.

Delete the button of transmitter:

We have learned transmitter to the receiver. If you don’t want the receiver to work with transmitter, you can delete all codes of transmitter which

are stored in the receiver. You can operate as following:

Press and hold “K3”button of receiver more 3 seconds; when signal LED on the receiver begin to flicker, then off, that means deleting is

successful.

Press and hold “K1”button of receiver more 3 seconds; when signal LED on the receiver begin to flicker, then off, that means deleting is

successful.

Press and hold “K2”button of receiver more 3 seconds; when signal LED on the receiver begin to flicker, then off, that means deleting is

successful.

Note: Before you change from motor rotates in positive direction to reversal direction or from motor rotates in reversal direction to positive

direction, you should stop rotating of motor firstly, then remote control motor.

Signal LED

Relay

Application Circuit

OUTPUT

Power LED

RF module

Antenna

Jumper S1

Jumper S2

INPUT

Power supply

DC Motor

Restrictive switches

When you use the restrictive switches

Antenna

RF module

Jumper S2

Jumper S1

Signal LED

Power LED

Relay

OUTPUT

Restrictive switches

INPUT

DC Motor

Power supply

When you don’t use the restrictive switches

Application Circuit

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Flying Industry Development Telecomando

Flying Industry Development

Flying Industry Development S1F2-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 4S1PFC-AC220+CV-8-3 Manuale utente

Flying Industry Development

Flying Industry Development S1UD-DC06 Manuale utente

Flying Industry Development

Flying Industry Development S1DA-DC09 Manuale utente

Flying Industry Development

Flying Industry Development Z-06 Manuale utente

Flying Industry Development

Flying Industry Development S1X2-DC Manuale utente

Flying Industry Development

Flying Industry Development 0020130 Manuale utente

Flying Industry Development

Flying Industry Development S1PS1-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0020481 Manuale utente

Flying Industry Development

Flying Industry Development S2PX-DC09-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0020703 Manuale utente

Flying Industry Development

Flying Industry Development 15S1PXB-DC12+1CP-15 Manuale utente

Flying Industry Development

Flying Industry Development 0020080 Manuale utente

Flying Industry Development

Flying Industry Development S1PUB-DC09 Manuale utente

Flying Industry Development

Flying Industry Development S1T-AC110 Manuale utente

Flying Industry Development

Flying Industry Development 0020210 Manuale utente

Flying Industry Development

Flying Industry Development S1X-DC06 Manuale utente

Flying Industry Development

Flying Industry Development S1XB-DC06 Manuale utente

Flying Industry Development

Flying Industry Development S1XB-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 3S2UB-DC12+CV-6 Manuale utente

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0020386 Manuale utente

Flying Industry Development

Flying Industry Development S2U-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0021112 Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione