Flying Industry Development S1XB-AC220-ANT2 Manuale utente

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control Radio Controller / Transmitter & Receiver

Package Include:

12 x Receiver: S1XB-AC220-ANT2 (1 Channel / Three Control Modes)

1 x Transmitter: CB-12

1 x User manual

Feature:

Wireless control, easy to install

Control Lights, Motors, Fans, electrically operated Doors / Locks / Windows / Blinds / Cars or OtherAppliances with AC 110~240V or DC 0~28V.

You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass

through walls, floors and doors.

With characteristics of reverse power protection and over current protection

Audible / visual indication

Use microcontroller model of EM78P156, an 8-bit microprocessor designed and developed with low-power and high-speed CMOS technology.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/several transmitters can control one/several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Working distance of transmitter and receiver with external extend antenna: 2000M / 6000ft (theoretically)

Receiver:

Model No.: S1XB-AC220- ANT2

Channel: 1 CH

Control Modes: Toggle, Momentary, Latched

Coding Type: Fixed code

Coding Setting: By learning

Power Supply (Operating Voltage):AC100~240V (S1XB-AC220-ANT2)

Output: AC 100~240V

PCB size: 75mm x 54mm x 22mm

Case size: 79mm x 58mm x 36mm

Maximum Working Current: 10A

External Extend Antenna:

Frequency Range: 300~450MHz

Impedance: 50Ω

Antenna Length: 15cm

Cable Length: 150cm

Weight: 35g

Anti-interference, waterproof, shielded wire set inside

Magnetic stand design for easy to install

Transmitter:

Model No.: CB-12

Channel: 12 CH

Remote Control Distance: 1000m / 3000ft (theoretically)

Encode: Fixed code by soldering

Unit size: 135mm x 42mm x 25mm

Power Supply: 1 x 6F22-9V battery (included, can be used for 12 months)

Usage:

Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you want to use other control modes, do as

following):

1) Setting control mode Toggle: Only connect Jumper-2.

Press button 1: Turn on the relay, terminal OUT of receiver 1 outputsAC power.

Press button 1 again: Turn off the relay, terminal OUT of receiver 1 no output.

…

Press button 12: Turn on the relay, terminal OUT of receiver 12 outputs AC power.

Press button 12 again: Turn off the relay, terminal OUT of receiver 12 no output.

2) Setting control mode Momentary: Only connect Jumper-1.

Press and hold button 1: Turn on the relay, terminal OUT of receiver 1 outputs AC power.

Release button 1: Turn off the relay, terminal OUT of receiver 1 no output.

…

Press and hold button 12: Turn on the relay, terminal OUT of receiver 12 outputs AC power.

Release button 12: Turn off the relay, terminal OUT of receiver 12 no output.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

3) Setting control mode Latched: Do not connect Jumper-1 and Jumper-2.

Press button 1: Turn on the relay, terminal OUT of receiver 1 outputsAC power.

Press other buttons: Turn off the relay, terminal OUT of receiver 1 no output.

…

Press button 12: Turn on the relay, terminal OUT of receiver 12 outputs AC power.

Press other buttons: Turn off the relay, terminal OUT of receiver 12 no output.

We have learned remote control to the receiver. If you don’t want the receiver to work with the remote control, you can delete all codes of remote

controls, which are stored in the receiver.

Operation: Press and hold the button of receiver until signal LED flashes slowly; release the button, LED keeps slow flash. That means all stored

codes have been deleted successfully.

LEARNING the remote control:

1) Press the button of receiver; signal LED on the receiver keeps shining. The receiver enters into status of LEARNING.

2) Press any one button on remote control. If signal LED flashes quickly 15 times and turns off, it means learning is successful.

3) Press any button on the transmitter; the receiver will learn the corresponding button on the transmitter.

4) When receiver is inthe status of LEARNING, press again the button of receiver, signal LED turns off, it means learning process is discontinued.

5) The receiver can learn several remote controls with different codes.

Relay

OUT

Jumper-2

Jumper-1

Power LED

Signal LED

Button

Live wire

Antenna

RF module

Power supply

Application Circuit

Lamp

Zero wire

Indice

Altri manuali Flying Industry Development Telecomando

Flying Industry Development

Flying Industry Development S1X-DC06 Manuale utente

Flying Industry Development

Flying Industry Development S1F2-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 0020481 Manuale utente

Flying Industry Development

Flying Industry Development S1PF-DC12 Manuale utente

Flying Industry Development

Flying Industry Development 0020794 Manuale utente

Flying Industry Development

Flying Industry Development S4C-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 002028 Manuale utente

Flying Industry Development

Flying Industry Development S2PX-DC09-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development S4PUA-AC220 Manuale utente

Flying Industry Development

Flying Industry Development 0020703 Manuale utente

Flying Industry Development

Flying Industry Development 0020109 Manuale utente

Flying Industry Development

Flying Industry Development S2U-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development S1X2-DC Manuale utente

Flying Industry Development

Flying Industry Development Z-06 Manuale utente

Flying Industry Development

Flying Industry Development 0020027 Manuale utente

Flying Industry Development

Flying Industry Development S1XB-DC06 Manuale utente

Flying Industry Development

Flying Industry Development S1T-AC110 Manuale utente

Flying Industry Development

Flying Industry Development S1F2-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 0020130 Manuale utente

Flying Industry Development

Flying Industry Development S2T-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0020386 Manuale utente

Flying Industry Development

Flying Industry Development 0020080 Manuale utente

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0021112 Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione