Flying Industry Development S1PF3-DC12 Manuale utente

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

RF Wireless Remote Control DC Motor Controller / Transmitter & Receiver

This is the DC motor controller. The DC motor controller can remote control one DC motor (DC12V/24V) rotates in positive/ reversal direction.

You can connect two restrictive switches to receiver and use them to stop motor rotation.

Package Include:

1 x Receiver: S1PF3-DC12 / S1PF3-DC24

2 x Transmitter: CWC-3

1 x User manual

Features:

Wireless control, easy to install

Waterproof case

With high power of 30A

Control DC motors of rolling blinds / doors, projection screens, awnings, pumps, winches, conveyors or other appliances and mechanicals with

voltage DC12V / 24V.

You can rotate the motor in positive or reversal direction with the transmitter (remote control) from any place within a reliable distance; the

wireless signal can pass through walls, floors and doors.

Reliable control: The transmitter (Encoding) and the receiver (Decoding) use an 8-bit code.

One/several transmitters can control one/several receivers simultaneously.

If you use two or more receivers in the same place, you can set them with different codes.

Transmitting Frequency: 315MHz / 433MHz

Receiver:

Model No.: S1PF3-DC12 / S1PF3-DC24

Coding Type: Fixed code or learning code

Coding Setting: By learning

Power Supply (Operating Voltage): DC12V±1V (S1PF3-DC12), DC24V±1V (S1PF3-DC24)

Output: DC12V (S1PF3-DC12), DC24V (S1PF3-DC24)

Case Size: 100mm x 67mm x 39mm

Quiescent Current: 5mA

Rated Current: 15A

The Maximum Instantaneous Current of Starting Motor: 30A

Transmitter:

Model No.: 0021102(CWC-3)

Channel: 3 CH

Waterproof

Remote Control Distance: 50m / 300ft (theoretically)

Encode: Fixed code by soldering

Unit Size: 58mm x 30mm x 12mm

Power Supply: 1 x 23A -12V battery (included, can be used for 12 months)

Usage:

Power supply:

Connect power supply DC12V / 24V to terminal “INPUT”; connect motor to terminal “OUTPUT”. You can exchange the output wires of motor to

change the rotating direction of motor.

Function of transmitter:

Press button ▲on remote: terminal “Output” output DC power, motor rotates in positive direction.

Press button ▼on remote: terminal “Output” output DC power, motor rotates in reversal direction.

Press button on remote: motor stops.

Function of manual buttons in receiver:

Press button K3 in receiver: terminal “Output” output DC power, motor rotates in positive direction.

Press button K1 in receiver: terminal “Output” output DC power, motor rotates in reversal direction.

Press button K2 in receiver: motor stops.

Restrictive function:

You can connect two restrictive switches to terminals “X1”and “X2”, if the restrictive switch X1 or X2 is connected, the motor will rotate; if the

restrictive switch X1 or X2 is disconnected, the motor will stop automatically. That means when the restrictive switch “X1”is connected, the motor

will rotate in positive direction; when the restrictive switch “X1”is disconnected, motor will stop automatically. When the restrictive switch “X2”is

connected, the motor will rotate in reversal direction; when the restrictive switch “X2”is disconnected, motor will stop automatically.

Learning the button of transmitter:

1) Press and hold “K3” button of receiver; when signal LED on the receiver begin to shine, release “K3”button. Before signal LED shines 5

seconds, press ▲button of transmitter, if the signal LED off, that means learning is successful.

2) Press and hold “K2” button of receiver; when signal LED on the receiver begin to shine, release “K2”button. Before signal LED shines 5

seconds, press button of transmitter, if the signal LED off, that means learning is successful.

SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD

Http://www.carymart.com E-Mail: sale@carymart.com

3) Press and hold “K1” button of receiver; when signal LED on the receiver begin to shine, release “K1”button. Before signal LED shines 5

seconds, press ▼button of transmitter, if the signal LED off, that means learning is successful.

Delete the button of transmitter:

We have learned transmitter to the receiver. If you don’t want the receiver to work with transmitter, you can delete all codes of transmitter which

are stored in the receiver. You can operate as following:

Press and hold “K3” button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.

Press and hold “K2” button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.

Press and hold “K1” button of receiver; when signal LED on the receiver begin to shine, then flicker, finally off, that means deleting is successful.

Note: Before you change from motor rotates in positive direction to reversal direction or from motor rotates in reversal direction to positive

direction, you should stop rotating of motor firstly, then remote control motor.

Signal LED

Relay 1

Relay 2

Application Circuit

OUTPUT

RF module

Antenna

INPUT

Power supply

DC Motor

Restrictive switches

Questo manuale è adatto per i seguenti modelli

Indice

Altri manuali Flying Industry Development Telecomando

Flying Industry Development

Flying Industry Development S1X2-DC Manuale utente

Flying Industry Development

Flying Industry Development S1PS1-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0020210 Manuale utente

Flying Industry Development

Flying Industry Development 0020027 Manuale utente

Flying Industry Development

Flying Industry Development 0020481 Manuale utente

Flying Industry Development

Flying Industry Development S1PUB-DC09 Manuale utente

Flying Industry Development

Flying Industry Development 4S1PFC-AC220+CV-8-3 Manuale utente

Flying Industry Development

Flying Industry Development S1XB-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 15S1PXB-DC12+1CP-15 Manuale utente

Flying Industry Development

Flying Industry Development S1UD-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 0020386 Manuale utente

Flying Industry Development

Flying Industry Development S2U-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 0020080 Manuale utente

Flying Industry Development

Flying Industry Development 0020794 Manuale utente

Flying Industry Development

Flying Industry Development 6S2UB-DC12+1CV-12 Manuale utente

Flying Industry Development

Flying Industry Development S2T-DC06-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development S1UD-DC06 Manuale utente

Flying Industry Development

Flying Industry Development 3S2UB-DC12+CV-6 Manuale utente

Flying Industry Development

Flying Industry Development 0020130 Manuale utente

Flying Industry Development

Flying Industry Development 002028 Manuale utente

Flying Industry Development

Flying Industry Development S1PX-DC-ANT2 Manuale utente

Flying Industry Development

Flying Industry Development 00200261 Manuale utente

Flying Industry Development

Flying Industry Development S1DA-DC09 Manuale utente

Flying Industry Development

Flying Industry Development 0020703 Manuale utente

Manuali Telecomando popolari di altre marche

Panasonic

Panasonic EUR7622KB0 Manuale utente

Bang & Olufsen

Bang & Olufsen Beo4 Manuale utente

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuale utente

Multiplex

Multiplex PROFI TX 9 Manuale utente

One Remote

One Remote RMB4 Manuale utente

FUTABA

FUTABA 9ZAP - PART2 Manuale utente

HR Matic

HR Matic HR MULTI 3 Manuale utente

Yamaha

Yamaha ACC-GNRST-30-20 Manuale utente

EisSound

EisSound KBSOUND Manuale utente

Marantz

Marantz RC101 Manuale utente

Conrad

Conrad FS20 TC6 Manuale utente

Anritsu

Anritsu MP1777A Manuale utente

Niles

Niles WVC100 Guida alla risoluzione dei problemi

RCA

RCA RCU1300 Manuale utente

Bang & Olufsen

Bang & Olufsen BEO6 Manuale utente

GE 94901 Manuale utente

Onbon

Onbon YQ1-75 Manuale utente

FUTABA

FUTABA R7108SB Istruzioni per l'installazione