Force Computers SPARC/CPU-5TE Manuale utente
FORCE COMPUTERS Inc./GmbH
All Rights Reserved
This document shall not be duplicated, nor its contents used
for any purpose, unless express permission has been granted.
Copyright by FORCE COMPUTERS
SPARC/CPU-5TE
Installation Guide
P/N 203739 Edition 5.0
February 1999
NOTE
The information in this document has been carefully checked and is believed to be entirely reliable. FORCE COMPUTERS makes no warranty of any kind with
regard to the material in this document, and assumes no responsibility for any errors which may appear in this document. FORCE COMPUTERS reserves the right
to make changes without notice to this, or any of its products, to improve reliability, performance, or design.
FORCE COMPUTERS assumes no responsibility for the use of any circuitry other than circuitry which is part of a product of FORCE COMPUTERS Inc./GmbH.
FORCE COMPUTERS does not convey to the purchaser of the product described herein any license under the patent rights of FORCE COMPUTERS Inc./GmbH nor
the rights of others. All product names as mentioned herein are the trademarks or registered trademarks of their respective companies.
World Wide Web: www.forcecomputers.com
24-hour access to on-line manuals, driver updates, and application notes
is provided via SMART, our SolutionsPLUS customer support program
that provides current technical and services information.
Headquarters
The Americas Europe Asia
FORCE COMPUTERS Inc.
2001 Logic Drive
San Jose, CA 95124-3468
U.S.A.
Tel.: +1 (408) 369-6000
Fax: +1 (408) 371-3382
Email [email protected]
FORCE COMPUTERS GmbH
Prof.-Messerschmitt-Str. 1
D-85579 Neubiberg/München
Germany
Tel.: +49 (89) 608 14-0
Fax: +49 (89) 609 77 93
Email [email protected]
FORCE COMPUTERS Japan KK
Miyakeya Building 4F
1-9-12 Hamamatsucho
Minato-ku, Tokyo 105
Japan
Tel.: +81 (03) 3437 3948
Fax: +81 (03) 3437 3968
Email [email protected]
FORCE COMPUTERS Page i
CPU-5TE Installation Guide Table of Contents
Table of Contents
Getting Started
1.1 Caution............................................................................................................................................ 1
1.2 Location Diagram of the SPARC CPU-5TE Board........................................................................ 1
1.3 Before Powering Up ....................................................................................................................... 4
1.3.1 Default Switch Settings ................................................................................................... 4
1.3.2 Memory Module MEM-5................................................................................................ 8
1.4 Powering Up................................................................................................................................... 9
1.4.1 VME Slot-1 Device ......................................................................................................... 9
1.4.2 VMEbus SYSRESET ...................................................................................................... 9
1.4.2.1 SYSRESET Input ........................................................................................... 9
1.4.2.2 SYSRESET Output......................................................................................... 9
1.4.3 Serial Ports....................................................................................................................... 9
1.4.4 RESET and ABORT Key Enable.................................................................................. 10
1.4.5 Front Panel SCSI#1 Termination .................................................................................. 10
1.4.6 P2 SCSI Termination..................................................................................................... 10
1.4.7 Boot Flash EPROM Write Protection ........................................................................... 11
1.4.8 User Flash EPROM Write Protection............................................................................ 11
1.4.9 Reserved Switches......................................................................................................... 11
1.4.10 Floppy Interface or SCSI#2 Availability on P2............................................................. 12
1.4.11 Network Interface Selection (NIS) for Ethernet............................................................ 13
1.4.12 Parallel Port ................................................................................................................... 13
1.5 OpenBoot Firmware ..................................................................................................................... 14
1.5.1 Boot the System............................................................................................................. 14
1.5.2 NVRAM Boot Parameters............................................................................................. 17
1.5.3 Diagnostics .................................................................................................................... 18
1.5.4 Display System Information.......................................................................................... 21
1.5.5 Reset the System............................................................................................................ 22
1.5.6 OpenBoot Help.............................................................................................................. 22
1.6 Front Panel.................................................................................................................................... 24
1.6.1 Features of the Front Panel............................................................................................ 25
1.8 SPARC CPU-5TE Connectors...................................................................................................... 26
1.8.1 Twisted Pair Ethernet Connector Pinout ....................................................................... 27
1.8.2 Serial Port A and B Connector Pinout........................................................................... 28
1.8.3 Keyboard/Mouse Connector Pinout .............................................................................. 30
Table of Contents CPU-5TE Installation Guide
Page ii FORCE COMPUTERS
1.8.4 VME P2 Connector Pinout............................................................................................ 31
1.8.5 The IOBP-10 Connectors .............................................................................................. 32
1.8.5.1 Jumper Setting for IOBP-10......................................................................... 32
1.9 IOBP-DS....................................................................................................................................... 37
1.9.1 Jumper Setting for IOBP-DS......................................................................................... 37
1.9.2 IOBP-DS P2 Connector Pinout ..................................................................................... 38
1.10 How to Determine the Ethernet Address and Host ID.................................................................. 43
1.11 History of the Manual................................................................................................................... 44
FORCE COMPUTERS Page iii
CPU-5TE Installation Guide Table of Contents
List of Figures
Figure 1. Diagram of the CPU-5TE (Top View) ............................................................................... 2
Figure 2. Diagram of the CPU-5TE (Bottom View) ......................................................................... 3
Figure 3. SCSI Termination ............................................................................................................ 10
Figure 4. Floppy or SCSI #2 Availability on P2 ............................................................................. 12
Figure 5. Diagram of the Front Panel .............................................................................................. 24
Figure 6. Twisted Pair Ethernet ....................................................................................................... 27
Figure 7. Serial Ports A and B Connector Pinout ............................................................................ 29
Figure 8. Keyboard/Mouse Connector ............................................................................................ 30
Figure 9. The IOBP-10 .................................................................................................................... 32
Figure 10. The IOBP-DS ................................................................................................................... 37
Table of Contents CPU-5TE Installation Guide
Page iv FORCE COMPUTERS
List of Tables
Table 1. Default Switch Settings...................................................................................................... 4
Table 2. Device Alias Definitions.................................................................................................. 16
Table 3. Setting Configuration Parameters.................................................................................... 17
Table 4. Diagnostic Routines......................................................................................................... 18
Table 5. Commands to Display System Information..................................................................... 21
Table 6. SPARC CPU-5TE Connectors......................................................................................... 26
Table 7. Twisted Pair Ethernet Connector Pinout.......................................................................... 27
Table 8. Serial Port A and B Connector Pinout............................................................................. 28
Table 9. Keyboard/Mouse Connector Pinout................................................................................. 30
Table 10. VME P2 Connector Pinout .............................................................................................. 31
Table 11. IOBP-10 P1 Pinout........................................................................................................... 33
Table 12. IOBP-10 P2 Pinout (SCSI #1) ......................................................................................... 34
Table 13. IOBP-10 P3 Pinout (Floppy)............................................................................................ 35
Table 14. IOBP-10 P5 Pinout (Serial).............................................................................................. 36
Table 15. IOBP-10 Pinout (Ethernet)............................................................................................... 36
Table 16. IOBP-DS J1 Pinout (SCSI #1)......................................................................................... 39
Table 17. IOBP-DS J2 Pinout (SCSI #2)......................................................................................... 40
Table 18. IOBP-DS J3 Pinout (Ethernet #1 - AUI) ......................................................................... 41
Table 19. IOBP-DS J4 Pinout (Serial A and B)............................................................................... 42
Table 20. IOBP-DS J5 Pinout (Keyboard/Mouse)........................................................................... 42
Table 21. History of Manual............................................................................................................ 44
FORCE COMPUTERS Page 1
SPARC/CPU-5TE Installation Guide
1. Getting Started
This Installation Guide provides guidelines for powering up the SPARC/CPU-5TE board. The
Installation Guide, which you have in your hand now, appears both as Section 2 of the SPARC
CPU-5TE Technical Reference Manual and as a stand-alone Installation Guide. The SPARC
CPU-5TE Technical Reference Manual is also available from FORCE COMPUTERS. The
SPARC/CPU-5TE Technical Reference Manual provides a comprehensive hardware and
software guide to your board and is intended for those persons who require complete
information.
1.1 Caution
Please read this Installation Guide before installing the board. Take a moment to examine the
Table of Contents to see how this documentation is structured. This will be of value to you
when looking for specific information in the future.
CAUTION: Do not plug or remove board under power.
1.2 Location Diagram of the SPARC CPU-5TE Board
A location diagram showing the important components on the CPU-5TE (top view) appears on
the following page. On the page next to it, there is a location diagram of the CPU-5TE (bottom
view) showing the position of five of the on-board switches.
Installation Guide SPARC/CPU-5TE
Page 2 FORCE COMPUTERS
FIGURE 1. Diagram of the CPU-5TE (Top View)
Reset
Abort
Rotary
Status LEDs
User LEDs
Keyboard
and
Mouse
Serial Port
A and B
SCSI #1
Twisted
Pair
Ethernet 2
Micro
S4-VME
"SLAVIO"
"MACIO"
NCR89C100
"MACIO"
NCR89C100
NCR89C105
RTC/NVRAM
LCA
B2 B3 B1
Ethernet 1
SBus Slot #2 at P4 SBus Slot #1 at P3
SW11
SW10
SPARC-II
SW4
SW6
Boot Flash
J 124
J 125
SW 7
B10 B9 B8
B2, B3, B1
and
B 10, B9, B8
are the sockets for
SCSI #2/Floppy
Switch Matrix
Twisted
Pair
Memory
Lower
(#1)
Upper
(#2)
Memory Module #2
Memory Module #1
7-Segment
Display
#2
#1
FORCE COMPUTERS Page 3
SPARC/CPU-5TE Installation Guide
FIGURE 2. Diagram of the CPU-5TE (Bottom View)
SW8
SW12
SW5
SW13
SW9
Installation Guide SPARC/CPU-5TE
Page 4 FORCE COMPUTERS
1.3 Before Powering Up
Before powering up, please make sure that the default switch settings are all set according to
the table below. Check these switch settings before powering up the SPARC CPU-5TE
because the board is configured for power up according to these default settings. For the
position of the switches on the board, please see the diagrams on the previous two pages.
1.3.1 Default Switch Settings
Table 1: Default Switch Settings
Diagram of Switch Switches Default
Setting Function
SWITCH 4
SW4-1 OFF reserved, must be OFF.
SW4-2 ON reserved, must be ON.
SWITCH 5
SW5-1 OFF Test Switch, must be OFF
SW5-2 ON Test Switch, must be ON
SW5-3 OFF SCSI Termination for SCSI # 2 on P2
OFF = Enable, ON = Disable
SW5-4 ON SCSI Termination for SCSI # 1 on P2
OFF = Enable, ON = Disable
SWITCH 6
SW6-1 ON Reset Key Control
ON=Reset Key enable, OFF=Reset Key disable
SW6-2 ON Abort Key Control
ON=Abort Key enable, OFF=Abort Key disable
ON
1
2
ON
1
2
3
4
ON
1
2
Indice
Manuali Scheda madre popolari di altre marche
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuale utente
Gigabyte
Gigabyte GA-9IVDT Manuale utente
Texas Instruments
Texas Instruments ADS8372EVM Manuale utente
Commell
Commell MS-C73 Manuale utente
IBT Technologies
IBT Technologies MB860 Manuale utente
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuale utente
