FOREVER SW-800 Manuale utente
USER MANUAL
SW-800
4
EN
EN
Thank you for purchasing a product by Forever. Before use, please refer to the User’s manual,
and save it for future reference. Do not disassemble the device on your own – all repairs should
be done by a service technician. Use only original parts and accessories provided by the ma-
nufacturer. We hope that the product by Forever fullls your expectation.
Introduction:
Before using the kids watch, carefully read the instruction manual to ensure correct operation.
Kids watch is a small telecommunication device, used to locate its position and send data.
Operation of the device is based on GSM/GPRS mobile network.
In the box:
1. Smartwatch
2. Charging cable
3. User manual
4. Extra strap
Frequency range Bluetooth 2402 – 2480 MHz
Maximu emitted power -0,08 dBm EiRP
Description:
1. Touch screen
2. Sports function
3. Main on/o button
4. Back to home button
5. Charging pins
6. Biometric sensor
Charging:
1. Before using your smartwatch for the rst time, make sure it is fully charged.
2. It will take approximately 3 hours to fully charge the smartwatch. After connecting the char
ger, the smartwatch charges automatically.
3. Make sure the charging pins on the charging cable align correctly with the charging pins
on the back of the smartwatch, then connect the other end of the cable to a power source.
Turning on/o the smartwatch:
Press and hold the „Main Button” until the smartwatch starts up. Swipe down the screen and
press the power o button.
Install „Forever Smart” app on the phone:
Search and install „Forever Smart” app from Google Play or App Store, or scan the QR code
below to install the app directly.
5
EN
Connect the smartwatch withe the phone:
1. Turn on Bluetooth on your phone.
2. Open the „Forever Smart” app on your phone, then enter all the required information in
the „Settings” menu.
3. Select „Connect Smartwatch” in the „Settings” menu.
4. Select the name of your device to connect it to your phone.
NOTE: The minimum operating system requirements for the phone to run the app and smar-
twatch are: Android 6.0 or later iOS 12.0 or later.
NOTE: To be able to use all the functions of the application and the smartwatch, you must
agree to access all the content requested by the application when you rst start the applica-
tion, and then also enable access to notications.
Unbind the smartwatch with the phone:
1. Open the „Forever Smart” app on your smartphone.
2. Press „Disconnect smartwatch” in the „Settings” menu and then conrm with „OK”.
3. To disconnect the smartwatch from the iOS smartphone, click „Disconnect device” in the
„Settings” menu of the „Forever Smart” application, then go to the iPhone’s Bluetooth settings
and select the „Forget this device” option.
Operation introduction:
• The screen can be turned on by raising your hand or pressing a function button.
• Press and hold the watch face interface, then swipe left or right to change the watch face. To
conrm your selection, click once on the selected style.
• To turn the watch on or o, press and hold the function button.
Control:
Power on: Press and hold the main button for 3 seconds.
Go to the menu: Swipe the watch face interface to the right.
Select a feature: Swipe up or down in the menu and select a feature icon.
Conrm: Select the icon.
Exit the menu: Swipe the interface to the right.
Return to the watch face: Briey press the main or bottom button on any interface.
Notications: Swipe up the watch face interface.
Quick access: Swipe down the watch face interface.
IOS Android
6
EN
Quick access:
In the „Quick access” area you can: mute notications, adjust display brightness, turn o the
device, check device information, open settings.
Notications:
In the „Notications” place, you can view notications such as: incoming calls, text messages,
app notications, etc.
Menu:
Once the smartwatch face is visible, swipe right to enter and view all functions in the menu.
Click on the icon to enter the submenu. Swipe from left to right to return.
7
EN
Functions:
1. Activity
The device automatically counts daily activity data. Select the „Activity” icon to see your steps,
distance traveled and calories burned for the day. If your device is connected to the applica-
tion, you can check its history.
2. Heart rate
Press the icon to start heart rate monitoring. If the smartwatch is connected to the „Forever
Smart” app via Bluetooth and automatic heart rate monitoring is enabled in the advanced
settings, you can also check your heart rate data in the app.
8
EN
3. Thermometer
To start measuring skin and body temperature, press the „Thermometer” icon and wait until
the device takes the measurement. The measurement takes approximately 60 seconds, after
which the results will appear on the screen. The top result shows body temperature and the
bottom result shows skin temperature.
• Wear the watch on your wrist for at least 5 minutes before taking a measurement. Otherwi-
se, the temperature sensor may show inaccurate results due to a dull ambient temperature
remaining on the sensor.
• The temperature detection function is not a medical function and is not intended for use in
medical diagnosis, treatment or any other medical purpose.
4. Blood oxygenation
To start the measurement, press the „Blood oxygenation” icon. Wait until the device takes the
measurement and displays the result. After synchronizing the data, you can check the measu-
rement history in the application.
5. Sleep
The smartwatch automatically monitors your sleep at night. When you wake up the next day,
the smartwatch will display the total number of hours you have slept. After synchronizing the
data, you can check the measurement history in the application.
9
EN
6. Sport
Select the „Sports” icon to go to the sports selection. Select the sport you want and then start
practicing it. The smartwatch will record training data.
7. Sport records
Check your recent training history.
10
EN
8. Notications
Check the notication history of your smartwatch. To decide from which sources you will re-
ceive notications, launch the application, open the device tab and „Notications”.
9. Alarm
10. Weather
If the smartwatch is connected to the „Forever Smart” app via Bluetooth, the smartwatch will
display the weather forecast. It is recommended to set the city manually, but you can also let
the „Forever Smart” app do it automatically.
Indice
Lingue:
Altri manuali FOREVER Orologio
FOREVER
FOREVER IGO PRO Manuale utente
FOREVER
FOREVER CAREME KW-400 Manuale utente
FOREVER
FOREVER SIVA ST-100 Manuale utente
FOREVER
FOREVER LOOK ME! 2 Manuale utente
FOREVER
FOREVER ForeFit SB-130 Manuale utente
FOREVER
FOREVER ForeVigo Smartwatch SW-320 Manuale utente
FOREVER
FOREVER GRAND SW-700 Manuale utente
FOREVER
FOREVER ForeVigo 2 SW-310 Manuale utente
FOREVER
FOREVER SW-500 Manuale utente
FOREVER
FOREVER vive2 slim Manuale utente
FOREVER
FOREVER SEE ME! 2 Manuale utente
FOREVER
FOREVER Look Me KW-500 Manuale utente
FOREVER
FOREVER ForeVigo 2 SW-310 Manuale utente
FOREVER
FOREVER SB-305 Manuale utente
FOREVER
FOREVER iGO PRO JW-200 Manuale utente
FOREVER
FOREVER ForeVive Lite Manuale utente
FOREVER
FOREVER Icon II AW-110 Manuale utente
FOREVER
FOREVER CALL ME! KW-50 Manuale utente
FOREVER
FOREVER Forevive SB-320 Manuale utente
FOREVER
FOREVER Care Me Manuale utente
