Freescale Semiconductor MC33696MOD Series Guida all'installazione

MC33696MODxxx Quick Start Guide

Laurent GAUTHIER-TSPG-MCD-ARC Page 1

Last update: February 5, 2007

MC33696MODxxx KIT

Quick Start User Guide

This document provides first information to use MC33696 tools.

Last update:

V1.1: Note for FCC

Important:

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

Note: the manufacturer is not responsible for any radio or TV interference caused by unauthorized

modifications to this equipment. Such modifications could void the user’s authority to operate the

equipment.

1 OVERVIEW

MC33696MODxxx operation requires:

An MC33696xxx RF Module with attached Printed antenna

A DEMO9S08RG60-SP MCU board

An RS232 cable

A PC with RS232 port, CD player and Hyper Terminal.

A 9V Battery

The operation of MC33696 is done by sending with Hyper Terminal a script to the MCU board that will

configure MC33696 in a defined configuration.

MC33696MODxxx Quick Start Guide

Laurent GAUTHIER-TSPG-MCD-ARC Page 2

Available script files:

standby configuration

continuous CW transmission

continuous 4.8kHz OOK transmission

continuous 4.8kHz FSK transmission

1 frame transmission using ID and HD

1 frame reception using ID and HD

2 LAUNCHING THE KIT

Plug the RF Module on the MCU board

Connect the MCU board to the PC using the RS232 cable

Launch HyperTerminal using the proper xxx.ht file according to available COM port

Connect the 9V battery

Screen on HyperTerminal receives status of MC33696 Registers and Pin levels

3 SENDING A SCRIPT FILE

3.1 Configuration in Receive mode

With the mouse, click on “Transfer/Send text file”

Select the xxx.txt Script file corresponding to the wanted configuration

For exemple :“RX OOK 433.92MHz IDHD00.txt” will configure the kit in receive mode at 433.92MHz

to receive any Square modulated signal at 4800bps :

433.92MHz, OOK

Receive with Data Manager

ID=00h, ID length=2 bits

HD=00h, HD length=1 bit

MC33696MODxxx Quick Start Guide

Laurent GAUTHIER-TSPG-MCD-ARC Page 3

At the end: “Receive Mode Active” indicates that the kit is waiting for data.

If an RF signal is transmitted using another kit or an RF generator properly configured (433,92MHz, Pulse

modulation at 4800bps), then the screen will be filled with received data:

3.2 Configuration in Transmit mode

With the mouse, click on “Transfer/Send text file”

Select the xxx.txt Script file corresponding to the wanted configuration

For exemple :“TX OOK 433.92MHz Square 4800bps.txt” will configure the kit in Transmit mode at

433.92MHz to send a modulated signal at 4800bps.

MC33696MODxxx Quick Start Guide

Laurent GAUTHIER-TSPG-MCD-ARC Page 4

At the end: “Sending square wave” indicates that the kit is sending a continuous modulation

Indice

Altri manuali Freescale Semiconductor Unità di controllo

Freescale Semiconductor

Freescale Semiconductor TWR-RF-MRB Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-LCD Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-WIFI-RS2101 Manuale utente

Freescale Semiconductor

Freescale Semiconductor MCF5249 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-MEM Manuale utente

Freescale Semiconductor

Freescale Semiconductor MCF5441X Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-P1025 Manuale di installazione

Freescale Semiconductor

Freescale Semiconductor Kinetis TWR-K24F120M Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-VF65GS10 Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-LCD Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-MEM-PISMO Manuale utente

Freescale Semiconductor

Freescale Semiconductor NXP TWR-LCDC-EPSON Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-K21F120MA Manuale utente

Freescale Semiconductor

Freescale Semiconductor TWR-KL25Z Manuale utente

Freescale Semiconductor

Freescale Semiconductor 56F826 Manuale utente

Freescale Semiconductor

Freescale Semiconductor 56852 Manuale utente

Freescale Semiconductor

Freescale Semiconductor MC33493MOD Series Guida all'installazione

Manuali Unità di controllo popolari di altre marche

Festo

Festo Compact Performance CP-FB6-E Manuale elenco delle parti

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuale utente

JS Automation

JS Automation MPC3034A Manuale utente

JAUDT

JAUDT SW GII 6406 Series Guida rapida

Spektrum

Spektrum Air Module System Manuale utente

BOC Edwards

BOC Edwards Q Series Manuale utente

KHADAS

KHADAS BT Magic Manuale utente

Etherma

Etherma eNEXHO-IL Manuale utente

PMFoundations

PMFoundations Attenuverter Manuale utente

GEA

GEA VARIVENT Manuale utente

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuale utente

Altronix

Altronix LINQ8PD Istruzioni per il montaggio

Eaton

Eaton Powerware Series Manuale utente

WAGO

WAGO 750-407/040-000 Manuale utente

Sony

Sony CCU-590 Manuale utente

Graco

Graco 25D614 Manuale utente

Task Force Tips

Task Force Tips YE-RF-900 Manuale di programmazione

Shini

Shini SPV-U Series Manuale utente