FrSky FWTM Manuale utente
Instruction Manual for FrSky FWTM Lite Module
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
Introduction
The FWTM Lite trainer module is an alternative option for pilots who do not have the radio with the PARA trainer
system but still expect to use the trainer system remotely. Power the trainer module by attaching it to the radio
module bay, now the student radio can bind the trainer module in ACCST or ACCESS mode and work at low
latency, so a simple wireless trainer system build is completed very quickly. By plugging an Audio type trainer
cable into the trainer module, this module system also provides a wired way to create wireless connections
between master and student radios.
● Frequency: 2.4GHz
● Dimension: 62.4*30*14.5mm (L*W*H)
● Weight: 18.5g
● Operating Voltage Range: 6.5-8.4V
● Operating Current: [email protected]
● Compatible with Lite Type Module Bay
Specifications
LED State
Green LED
On
Flash
On
On
On
Off
Blue LED (Lite TYPE)
On
Flash
On
Off
Off
On
Status
Register
Register successfully
Bind
Bind successfully
Working normally
Failsafe
ACCESS
Overview
62.4mm
14.5mm 30mm
● Wireless Trainer Control with Low Latency
● Supports wireless connection to student radio with FWTM Lite module attached on master radio via audio port.
● Smart-Matched ACCESS & ACCST D16 Modes
Features
Operation steps
ACCESS Mode:
1. Set the master radio/trainer module to [Reg] mode.
1.1 Turn on the student radio and navigate to Menu-Model Setup-Page 2. Choose Internal or External RF and
select [Reg].
2. Press and hold the binding button on the trainer module while turning on the master radio. The blue and green
LEDs on the trainer module will light up, indicating that it entered [Reg] mode. On the student radio, select
[ENTER], and the blue and green LEDs on the trainer module will blink with the student radio displaying
[Registration ok].
3. Turn off the trainer module.
4. Move the cursor to the [Bind] option for selecting Receiver 1.
5. Turn on the trainer module, and the green LED will blink, indicating it entered [Bind] mode. Choose the module,
and the green LED will remain lit, with the student radio displaying [Bind successful].
6. The trainer module exits [Bind] mode, and the green LED will stay lit, while the blue LED will turn off, indicating
normal operation.
7. Select Master/SBUS Module for wireless trainer mode.
8. Enable the wireless trainer function on the radio and set a switch.
Instruction Manual for
FrSky FWTM Lite Module
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
ACCST D16
Green LED
On
Off
On
Off
Blue LED (Lite TYPE)
On
Flash
Off
On
Status
Bind
Bind successfully
Working normally
Disconnect
Instruction Manual for
FrSky FWTM Lite Module
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
9. Choose Enable to complete the setup.
ACCST D16 Mode:
1. Press and hold the binding button on the FWTM module while turning on the master radio. Release the button.
The blue LED on the FWTM module will flash, and the green LED will light up, indicating that the trainer module
is ready to be bound with the student radio.
2. Turn off the master radio.
3. Turn on the master radio. The steady green LED on the trainer module indicates that the module is receiving
commands from the student radio. Unless one of the devices is replaced, there is no need to repeat the binding
process between the receiver and the master radio module.
4. Select the Master/SBUS Module for wireless trainer mode.
5. Enable the wireless trainer function on the radio and set a switch.
6. Choose Enable to complete the setup.
Wired connection method
1. Please connect the audio port of the module to the audio port of master radio and power the module.
2. Please change the trainer mode of the radio used for binding with the module to Master/Jack.
FrSky is continuously adding features and improvements to our products. To get the most from your product, please check
the download section of the FrSky website www.frsky-rc.com for the latest update firmware and manuals
Instruction Manual for
FrSky FWTM Lite Module
Add: F-4,Building C, Zhongxiu Technology Park, No.3 Yuanxi Road, Wuxi, 214125, Jiangsu, China Technical Support: [email protected]
Indice
Altri manuali FrSky Unità di controllo
FrSky
FrSky TWIN Lite Pro Manuale utente
FrSky
FrSky R9M Lite Pro Manuale utente
FrSky
FrSky ESC Neuron 40 Manuale utente
FrSky
FrSky R9M Lite Pro Manuale utente
FrSky
FrSky R9M 2019 Manuale utente
FrSky
FrSky RB-25 Manuale utente
FrSky
FrSky XJT Lite Manuale utente
FrSky
FrSky D6FR Manuale utente
FrSky
FrSky RB-35 Manuale utente
FrSky
FrSky R9M Lite Pro Manuale utente
Manuali Unità di controllo popolari di altre marche
Festo
Festo Compact Performance CP-FB6-E Manuale elenco delle parti
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuale utente
JS Automation
JS Automation MPC3034A Manuale utente
JAUDT
JAUDT SW GII 6406 Series Guida rapida
Spektrum
Spektrum Air Module System Manuale utente
BOC Edwards
BOC Edwards Q Series Manuale utente
