FS S3400-24T4SP Manuale utente
ETHERNET POE SWITCH
ETHERNET POE SWITCH
SWITCH ETHERNET POE
V1.0
Quick Start Guide
Quick Start Anleitung
Guide de Démarrage Rapide
S3400-24T4SP
CON
MGMT
1 2 3 4
17 18 19 20 21 22 23 24
9 10 11 12 13 14 15 16
1 2 3 4 5 6 7 8
SYS ID MGMT POE
S5850-24XMG-U POE+
Breakout
26 100G
25
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 2019 2221 2423
1817
SFP+
25 26 27 28
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 2019 2221 24231817
SFP+
25 26 27 28
EN
Introduction
Thank you for choosing the S3400-24T4SP PoE Switch. This guide is designed to familiarize you with
the layout of the switch and describes how to deploy it in your network.
Accessories
S3400-24T4SP
1
Rubber Pad x4
Console Cable x1
Mounting Bracket x2
Power Cord x1
M3 Screw x8
Grounding Cable x1
EN
2
Front Panel Ports
Ports Description
CONSOLE
RJ45
An RJ45 console port for serial management
10/100/1000BASE-T ports for Ethernet connection
SFP+ SFP+ port for 10G connection
Hardware Overview
Front Panel LEDs
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 2019 2221 24231817
SFP+
25 26 27 28
CONSOLE RJ45 SFP+
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 2019 2221 24231817
SFP+
25
26
27 28
PWR POE SFP+
RJ45
SYS
LEDs State
SYS
PWR
RJ45
POE
Blinking Green
O
O
Solid Green
Solid Orange
O
Solid Yellow
O
Solid Green
The system is not working.
The system is started and works normally.
The switch is powered on.
The switch is powered o.
The port is running at 1000Mbps.
The port is running at 10/100Mbps.
The port is not linked.
The PD is connected and the PoE power supply is normal.
The PD is not connected or the PoE power supply is not provided.
Description
EN
Front Panel Button
Back Panel
SFP+
3
LEDs State
OFF
Solid Green
Solid Orange
The port is running at 10000Mbps.
The port is running at 1000Mbps.
The port is not linked.
Description
Reset
Button
Press the button for 6s to restore the factory default settings.
Description
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 2019 2221 24231817
SFP+
25 26 27 28
RESET
Grounding Point AC Power Socket
EN
Installation Requirements
Before the installation, make sure that you have the following conditions
ready:
Phillips screwdriver, related bolts and ESD tools.
Standard-sized, 19" wide rack with a minimum of 1U height available.
Category 5e or higher RJ45 Ethernet cables for connecting network devices.
1. Attach four rubber pads to the bottom.
2. Place the switch on the desk.
Mounting the Switch
Site Environment:
Make sure that the temperature of the installation site is maintained at -20℃~65℃.
Make sure that the relative humidity of the installation site is maintained at 10%~90%.
The installation site must be free from leaking, dripping water, heavy dew, or humidity.
Keep the installation site dust-free.
The installation site must be well-ventilated. Make sure that there is adequate airow around the
switch.
Make sure that the switch is level and stable to avoid any hazardous conditions.
Make sure that the rack and working platforms are well-earthed.
Desk Mounting
4
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2
PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 2019 2221 2423
1817
SFP+
25 26 27 28
CON
MGMT
1 2 3
SYS ID MGMT POE
S5850-24XMG-U POE+
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87
EN
5
Rack Mounting
1. Secure the mounting brackets to the two sides of the switch with eight M3 screws.
2. Install the switch on the rack with four M6 screws and cage nuts.
1 2 3 4
17 18 19 20 21 22 23 24
9 10 11 12 13 14 15 16
45 6 7 8
Breakout
26 100G
25
CONSOLE
21 43 65 87 109 1211 1413 1615 2019 2221 2423
1817
SFP+
25 26 27 28
NOTE: Do not place heavy objects on the switch.
109 1211 1413 1615 2019 2221 2423
1817
SFP+
25 26 27 28
EN
6
Grounding the Switch
1. Connect an Ethernet cable to the RJ45 port of IP cameras, IP telephones, Access Points (AP), or
other network devices.
2. Connect the other end of the Ethernet cable to the RJ45 port of the switch.
Connecting the RJ45 Ports
CAUTION: The earth connection must not be removed unless all supply connections have
been disconnected.
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 1413 1615 19
1817
1. Connect one end of the grounding cable to a proper earth ground, such as the rack in which the
switch is mounted.
2. Secure the grounding lug to the grounding point on the switch back panel with the screw
and washers.
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 7
EN
7
Connecting the SFP+ Ports
Connecting the Console Port
1. Plug the compatible SFP+ transceiver into the SFP+ port.
2. Connect a ber optic cable to the ber transceiver. Then connect the other end of the cable to the
other ber device.
1. Insert the RJ45 connector into the RJ45 console port on the front panel of the switch.
2. Connect the DB9 female connector of the console cable to the serial port on the PC.
20 2221 2423
SFP+
25 26 27 28
8109 1211 1413 1615 2019 2221 2423
1817
SFP+
25 26 27 28
S3400-24T4SP PoE+
1 3 5 7 9 11 13 15 17 19 21 23
Link/Act
PoE
PoE
2PWR
SYS
4 6 8 10 12 14 16 18 20 22 RESET
CONSOLE
24 25 26 27 28
21 43 65 87 109 1211 13
EN
8
1. Plug the AC power cord into the power port on the back panel of the switch.
2. Connect the other end of the power cord to an AC power source.
Connecting the Power
1413 1615 2019 2221 2423
1817
SFP+
25 26 27 28
Step 1: Connect a computer to any Ethernet port of the switch using the network cable.
Step 2: Set the IP address of the computer to 192.168.1.x. ("x" is any number from 2 to 254.). Set the
subnet mask of the computer to 255.255.255.0.
Conguring the Switch Using the Web-Based Interface
Internet Protocol Version 4 (TCP/IPv4) Properties
Cancel
Advanced...
OK
x
General
You can get IP settings assigned automatically if your network
supports this capability. Otherwise, you need to ask your network
a dministrator for the appropriate IP settings
Obtain an IP address automatically
Use the following IP address:
IP address:
Subnet mask:
Default gateway
Obtain DNS server address automatically
Use the following DNS server address:
Validate settings upon exit
192 . 168 . 1 . 2
225 . 225 . 225 . 0
. . .
Preferred DNS server . . .
Alternate DNS server . . .
?
Conguring the Switch
100-240V AC50/60Hz
WARNING: Do not install the power cord while the power is on.
EN
9
Conguring the Switch Using the Console Port
Step 3: Open a browser, type http://192.168.1.1 and enter the default username and password,
admin/admin.
Step 4: Click Login to display the web-based conguration page.
Step 1: Connect a computer to the console port of the switch with the console cable.
Step 2: Start the terminal simulation software, such as HyperTerminal on the computer.
Step 3: Set the parameters of the HyperTerminal: Baud rate to 115200, Data bits to 8, Parity to None,
and Stop bits to 1.
Step 4: After setting the parameters, click Connect to enter.
x
Quick Connect
Protocol:
The port may be manually entered or selected from the list.
Serial
Flow Control
DTR/DSR
RTS/CTS
XON/XOFF
Save sessionShow quick connect on startup
Open in a tab
Connect Cancel
COM3
115200
8
None
1
Port:
Baud rate:
Data bits:
Parity:
Stop bits:
Name of pipe:
Indice
Lingue:
Altri manuali FS Interruttore
FS
FS S3900 Series Manuale utente
FS
FS S5800-48MBQ Manuale utente
FS
FS S5300-12S Manuale utente
FS
FS S5860-20SQ Manuale utente
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S5850-24XMG-U Series Manuale utente
FS
FS S3410 Series Manuale utente
FS
FS S3910 Series Manuale utente
FS
FS S5500-48T8SP Manuale utente
FS
FS S1900-8TP Manuale utente
FS
FS S5500-48T6SP-R Manuale utente
FS
FS Fiberstore S8050-20Q4C Manuale utente
FS
FS N5860 Series Manuale utente
FS
FS S3150-8T2FP Manuale utente
FS
FS S5850-24S2Q-DC Manuale utente
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S3910-24TF Manuale operativo
FS
FS S3700-24T4F Manuale di istruzioni
FS
FS S5860-24XB-U Manuale utente
