FS S3410-24TS-P Manuale utente

S3410-24TS-P/S5860-24XB-U

Quick Start Guide

24-PORT GIGABIT L2+/L3 POE

MANAGED SWITCHES

PoE

Status M1 M2 PWR1PWR2 PoE

1 2 3 4 5 6 7 8 910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24 25 2623

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=OverLoad

CONSOLE

SFP+

S3410-24TS-P

PoE+

S5860-24XB-U

29 30 31 32

25 26 27 28

13 14 15 16 17 18 19 20 21 22 23 24

Yellow=OverLoad

5678910 11 12

On=Link Flashing=ACT PoE LED Mode:Green=GoodSupplyYellow=100M

1234

Green=10G/5G/2.5G/1G

MGMT

SYS PWR FAN PoE

PoE FUNC

CONSOLE

V1.1

Introduction

Accessories

S5860-24XB-U

S3410-24TS-P

Thank you for choosing S3410-24TS-P & S5860-24XB-U POE Switches. This guide is designed

to familiarize you with the layout of the switches and describes how to deploy the switches in your

network.

Grounding Cable x1

Power Cord x2

M4 Screw x8

Rubber Pad x4

Mounting Bracket x2

PoE

Status M1 M2 PWR1PWR2 PoE

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24 25 2623

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad

CONSOLE

SFP+

S3410-24TS-P PoE+

MGMT

SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

PoE FUNC

S5860-24XB-U

Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=OverLoad

CONSOLE Yellow=100M

NOTE: S3410-24TS-P & S5860-24XB-U POE switches have dust plugs delivered with

them. Keep the dust plugs properly and use them to protect idle optical ports.

S5860-24XB-U

S3410-24TS-P

Hardware Overview

Front Panel Ports

PoE

Status M1 M2 PWR1 PWR2 Po E

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24 25 2623

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad

CONSOLE

SFP+

S3410-24TS-P PoE+

CONSOLE

MGMT

USB CONSOLE

USB RJ45

RJ45 SFP+ SFP28

RJ45/SFP Combo SFP+

Ports Description

RJ45

SFP+

RJ45/SFP Combo

USB

CONSOLE

10/100/1000BASE-T ports for Ethernet connection

One RJ45 port and one SFP slot, with one port active at a time

SFP+ ports for 1/10G connection

Reserved

An RJ45 console port for serial management

MGMT

SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

PoE FUNC

S5860-24XB-U

Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=Over Load

CONSOLE Yellow=100M

S5860-24XB-U

S3410-24TS-P

Front Panel Buttons

MGMT

SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

PoE FUNC

S5860-24XB-U

Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=Over Load

CONSOLE Yellow=100M

PoE

Status M1 M2 PWR1 PWR2 Po E

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24 25 2623

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad

CONSOLE

SFP+

S3410-24TS-P PoE+

PoE

Ports Description

RJ45

SFP28

SFP+

USB

CONSOLE

MGMT

100M/1G/2.5G/5G/10G ports for Ethernet connection

SFP+ ports for 1/10G connection

SFP28 ports for 10/25G connection

A USB management port for software and conguration backup and

oine software upgrade

An RJ45 console port for serial management

Button Description

PoE

PoE FUNC

Switch the display mode between PoE mode and switch mode.

Button Description

PoE

FUNC

Switch the display mode between PoE mode and switch mode.

NOTE: Press PoE Mode Switch-Over Button to switch the display mode between PoE mode

and switch mode.

The switch will restart after you press the FUNC button for more

than ve seconds and wait for another ten seconds.

An out-of-band Ethernet management port

M1SFANI-F

Status

M1SFANI-F

Status

M1SFANI-F

Status

FAN1 FA N2 FA N3 PWR1 PWR2

Input

Output

Input

Output

S5860-24XB-U

S3410-24TS-P

Back Panels

Power

Input

Module1 Module2

Output

Input

Output

Dual Power Supplies

Expansion Module Slot

Grounding Point Fan Slot

Grounding Point

Front Panel LEDs

PoE

Status M1 M2 PWR1 PWR2 Po E

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24 25 2623

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoELED:Green=Good Supply Yellow=OverLoad

CONSOLE

SFP+

S3410-24TS-P PoE+

RJ45

Status

PWR1

PoE

PWR2

SFPPoE (1-24)

SFP+

LEDs DescriptionStatus

Status

O Switch is not receiving power.

System is being initialized. Continuous blinking indicates

errors.

The switch is operational.

Temperature warning, check the working environment of

the switch immediately.

Switch is faulty.

Blinking Green

Solid Green

Solid Yellow

Solid Red

Dual Power Supplies

LEDs DescriptionStatus

M1/M2

O

Solid Green

Solid Yellow

PWR1/PWR2

PoE

RJ45

SFP

O

Solid Green

Solid Red The power module is in place but the AC power cord or

switch is abnormal.

The power supply is operational.

The power module is not in place.

O

Indicates the PoE state.

The port is not connected.

Solid Green The port is connected at 1000 Mbps.

Blinking Green The port is receiving or transmitting trac at 1000 Mbps.

Solid Yellow

O

Solid Green

Solid Yellow

The port is connected at 10/100 Mbps.

Blinking Yellow

Solid Yellow

Blinking Yellow

The port is receiving or transmitting trac at 10/100 Mbps.

O The port is not connected.

The port is not connected.

Solid Green The port is connected at 1000 Mbps.

Blinking Green

O

Solid Green

Blinking Green

The port is receiving or transmitting trac at 1000 Mbps.

The port is connected at 100 Mbps.

The port is receiving or transmitting trac at 100 Mbps.

Indicates the switching state.

There is no expansion module or the expansion module is

not correctly installed.

The expansion module is correctly installed.

PoE (1-24)

PoE is not enabled.

PoE is enabled. The port is operational.

The port has a PoE fault of overload.

SFP+

The port is connected.

The port is receiving or transmitting trac at 10Gbps.

S5860-24XB-U

MGMT

SYS PWR FAN PoE 1 2 3456 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

PoE FUNC

S5860-24XB-U

Green=10G/5G/2.5G/1G On=Link Flashing=ACT PoE LED Mode:Green=Good Supply Yellow=Over Load

CONSOLE Yellow=100M

LEDs DescriptionStatus

SYS

O

The system is powered o.

1.A system fault occurs.

2.The temperature reaches the upper limit.

Initialization is in progress.

The system works properly.

The locator takes eect. It is controlled by O&M personnel

remotely.

1.The temperature reaches the threshold value.

2.Dierent power modules are used together.

Blinking Green

Solid Green

Solid Yellow

O

Blinking Green

Solid Green

Solid Yellow

Blinking Yellow

Solid Yellow

Solid Blue

RJ45

PoE (1-24) SFP+

SFP28

MGMT

SYS

PWR

FAN

PoE

Solid Red

Both power modules are NOT in the position.

The power module works properly.

1.A power fault occurs.

2.No AC power cable is plugged in.

3.The power model does not match.

The fan works properly.

1.A fan fault occurs.

2.The fan model does not match with the system.

3.Not all fans are in position.

Indicates the switching state.

Indicates the PoE state.

The MGMT port is NOT connected.

The MGMT port is connected at 1000Mbps.

The MGMT port is transmitting or receiving data at 1000Mbps.

The MGMT port is connected at 10/100Mbps.

The MGMT port is transmitting or receiving data at 10/100Mbps.

M1SFANI-F

Status

M1SFANI-F

Status

M1SFANI-F

Status

FAN1 FA N2 FA N3

PWR1 PWR2

Input

Output

Input

Output

Installation Requirements

Before you begin the installation, make sure that you have the following:

Category 5e or higher RJ-45 Ethernet cables, ber optical cables and console cable for

connecting network devices.

Phillips screwdriver.

Related electric cables and optical cables.

Standard-sized, 19" wide rack with a minimum of 1U height available.

O

Blinking Green

Solid Green

Yellow

Blinking Yellow

Back Panel LED

FAN Indicator

LEDs DescriptionStatus

RJ45

The RJ45 port is NOT connected.

The RJ45 port is connected at 1G/2.5G/5G/10G.

The RJ45 port is transmitting or receiving data at

1G/2.5G/5G/10G.

The RJ45 port is connected at 100Mbps.

PoE works properly.

PoE is o.

A PoE fault or overload occurs.

The RJ45 port is transmitting or receiving data at 100Mbps.

PoE

(

1-24)

Solid Yellow

SFP+

The SFP+ port is NOT connected.

The SFP+ port is connected at 10G/1G.

The SFP+ port is transmitting or receiving data at 10G/1G.

SFP28

The SFP28 port is NOT connected.

The SFP28 port isconnected at 25G/10G.

The SFP28 port is transmitting or receiving data at 25G/10G.

S5860-24XB-U

PoE

Status M1 M2 PWR1PWR2 PoE

1 2

3456 7 8 9 10 11 12

12 14 24

13 14 15 16 17 18 19 20 21 22 23 24

Green=1000M Yellow=10/100MOn=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=Over Load

Console

25F 26F 27F

RG-S2910-24GT2XS-UP-E

SFP+

PoE

Status M1 M2 PWR1 PWR2 PoE

12345678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=OverLoad

CONSOLE

Site Environment:

Desk Mounting

1. Attach four rubber pads to the bottom.

2. Place the chassis on a desk.

PoE

Status M1 M2 PWR1 PWR2 PoE

12345678910 11 12 13 14 15 16 17 18 19 20 21 22 23 24

24 25 26

Green=1000M Yellow=10/100M On=Link Flashing=ACT PoE LED:Green=Good Supply Yellow=OverLoad

CONSOLE

SFP+

S3410-24TS-P

PoE+

Mounting the Switch

Do not operate it in an area that exceeds an ambient temperature of 50°C.

The installation site must be free from leaking or dripping water, heavy dew, and humidity.

Ensure rack and working platforms are well earthed.

Standard-sized, 19" wide rack with a minimum of 1U height available.

Be sure that the switch is level and stable to avoid any hazardous conditions.

Do not install the equipment in a dusty environment.

1. Secure the mounting brackets to the two sides of the S3410-24TS-P switch with eight M4 screws.

(S5860-24XB-U switch with six M4 screws by default, another 2 screws for redundant.)

Rack Mounting

RG-S2910-24GT2XS-UP-E

2. Attach the switch to the rack using four M6 screws and cage nuts.

SYS

24 25 26

SFP+

C3440-24T2F2SP PoE+

Questo manuale è adatto per i seguenti modelli

Indice

Manuali Interruttore popolari di altre marche

URC

URC Total Control MFS-8 Manuale utente

Azbil

Azbil HPQ-D11 Manuale utente

Sony

Sony DFS-900M Manuale utente

SICK

SICK i17S Manuale utente

F&F

F&F SZR-277 Manuale utente

Shure

Shure UAMS/BK Manuale utente

Dräger

Dräger X-zone Switch Off Manuale utente

Asco

Asco Joucomatic 349 Series Manuale utente

BT Mini Hub Manuale utente

D-Link

D-Link DES-1226G Manuale utente

Johnson Controls

Johnson Controls FS80-C Manuale utente

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuale utente

MicroNet

MicroNet SP1200A Manuale utente

Ruijie

Ruijie RG-PF2920 Series Manuale di installazione e funzionamento

Altinex

Altinex DA1914SX Manuale utente

MiLAN

MiLAN MIL-SM2401M Manuale utente

RJM

RJM MASTERMIND PBC/6X Manuale utente

Atlas

Atlas MMK-KVM8 Manuale utente