FujiFilm FM-DP L Manuale utente
FM-DP L
Service Manual
INSTALLATION
B-1
FM-DP L
Service Manual
B-1
INSTALLATION CONTROL SHEET
006-252-05
06.30.01 FM3040
CONTROL SHEET
Revision Number Reason Pages AffectedIssue Date
03/18/99 00 New release (FM2437) All pages
06/15/99 01 Revised(FM2514) 1-1~8-5, A1-1~A2-2, A2-5,
A2-7~A2-10
10/22/99 02 Revised(FM2569) B-1~B-15, B1-3~B1-11, B2-1~B2-4,
B2-8, B2-11, B2-13, B2-14,
B2-18~B2-57, B3-2, B3-3,
B4-3~B4-9, B5-1~B5-7, B7-2, B7-6,
B7-7, B8-2, B8-4~B8-7
05/20/00 04 Revised(FM2742) B-1~B1-6, B-9, B-10, B1-5, B1-9,
B1-10, B2-18, B2-19,
B2-19.1~B2-19.4, B2-23, B2-54,
B2-55, B3-2, B3-3, B4-4, B4-5, B5-2
06/30/01 05 Revised(FM3040) B-1~B-5, B-9~B-10, B-12, B-14,
B-15, B1-1, B1-2, B1-9, B2-14,
B2-16~B2-20, B2-22,
B2-23.1~B2-25, B3-2~B3-5, B4-4,
B4-5, B5-2, B7-3~B7-11, B8-1~B8-3,
B9-1~B9-7
B-8INSTALLATION CONTENTS
006-252-02
10.22.99 FM2569 FM-DP L
Service Manual
B-8
INSTALLATION PROCEDURE FLOW
(Remove the fixing materials according to the strings.)
A
START
1.2 Unpacking, Unloading
1.1 Precautions on Installation
1.3 Carrying
1.4 Preparations
1.5 Checking Installation Package Contents
2.1 Removing the External Packaging of the
Equipment Main Body
2. INSTALLATION
1. WORK BEFORE INSTALLATION
2.2 Removing Covers
2.3 Removing Fixing Materials
2.3.1 Removal Unit (Rear of equipment)
2.3.2 Before-Sub-Scanning/Sub Scanning Unit
(Rear of equipment)
2.3.3 Transport Unit (Left side of equipment)
2.3.6 Removal Unit (Front of equipment)
2.3.7 Heat Development Unit (Top of equipment)
2.3.4 Before-Sub-scanning/Sub Scanning Unit
(Left side/Front side of equipment)
2.3.5 Storing Fixtures Securing the Unit
(rear of Equipment)
FP3B0001.EPS
B-9
006-252-05
06.30.01 FM3040 FM-DP L
Service Manual
B-9
INSTALLATION CONTENTS
A
2.5 Setting the Film Tray Size
2.4.1 Installing the Pre-Rotary Idler Roller
2.4.2 Installing the Cleaning Roller
2.4.3 Installing the Image Memory Board
Setting and Installing HAV90A Board
Setting and Installing HAV90B Board
Setting and Installing DIV90A Board
Setting and Installing
DPI06A/06B Board
Setting and Installing ORP06A Board
2.4.6 Installing the Memory Card
2.4.7 Setting and Installing the Image Interface Board
FP3B0002.EPS
E-I/F Imager
Setting and Installing FIX90A Board
(Installing two MMB90A to the MTH11A board.)
(Installing the memory card into the CPU90G board.)
(Setting and installing the optional image I/F boards.)
(E-I/F board)
(Change film tray size to 26 x 36, 35 x 43 if necessary.)
(Analog video)
(High speed analog video)
(Digital video)
(Digital)
(Optical tramsmission unit type-II)
B
2.5.1 Setting Film Tray Size for Machine Numbers
to #3024, #3027 to #3099
2.5.3 Attaching Position of Guide
(For All Machine Numbers)
2.5.2 Setting Film Tray Size for Machine Numbers
#3025, #3026, and #3100 Onwards
2.4.4 CPU Board for DICOM Connection
(Notice for DICOM connection)
E-I/F
2.4.5 Installing the MEM11A Board
(Install the MEM11A board for 20 Pix/mm recording)
2.4 Installing Separately Packaged Items
B-10INSTALLATION CONTENTS
006-252-05
06.30.01 FM3040 FM-DP L
Service Manual
B-10
B
FP3B0003.EPS
2.10
Checking the Power Supply Settings and Resistance
2.11 Checking the Short-Circuiting of NFB
2.12 Reinstalling Covers
2.11.1 Front Side of Equipment
2.11.2 Right Side and Rear Side of the Equipment
2.11.3 Left Side of the Equipment
2.11.4 Sorter
2.7 Installing the Optional HDD Kit
2.8 Assembling the Optional Optical Transmission Unit-II
2.9 Installing the Optional Sorter
2.7.1 Unpacking the Optional HDD Kit
2.7.2 Installing the HDD Kit
2.10.1 Equipment Main Body
2.10.2 Sorter
2.9.1 Installing Kit Parts and Adjusting Height and Gap
(Refer to APPENDIX 2 OPTICAL TRANSMISSION UNIT TYPE-II)
(Reconnect the cable to the terminal for the power supply
used and check the non short circuit of the power supply board.)
C
2.6 Installing the Optional Lower Removal Kit/Replacing with
Optional Rollers for Using 20 x 25 cm Size Film
2.6.1 Installing the Optional Lower Removal Kit
2.6.2 Replacing with Optional Rollers for Using
20 x 25 cm Size Film
B-11
006-252-02
10.22.99 FM2569 FM-DP L
Service Manual
B-11
INSTALLATION CONTENTS
C
FP3B0004.EPS
D
2.14 Checking the Power Supply Voltage
2.15 Power ON and Starting the M-Utility
2.15.1 Power ON
2.15.2 Starting the M-Utility
2.15.3 Turning ON the Power of the Optical Transmission Unit Type-II
2.15.4 Turning ON the Sorter Power
(Check the power supply voltage of the outlet.)
(Refer to APPENDIX 2 OPTICAL TRANSMISSION UNIT TYPE-II)
(Turn ON the power switch on the rear side of the
equipment, forthed stop switch and remote/local switch.)
2.13 Connecting Interface Cables
2.13.1 Connections for E-I/F Specifications
2.13.5 Connecting Interface Cables
Between the Sorter and Equipment
2.13.2 Connections for Imager
Specifications (FM-DP)
2.13.3 Connecting the Remote Panel
(FM-DP)
2.13.4
Connecting the Optical
Transmission Unit Type-II (FM-DP)
Connecting to HAV90A board
Connecting to HAV90B board
Connecting to DVI90A board
Connecting to DPI06A/DPI06B board
Connecting to OPR06A board
Connecting to FIX90A board
E-I/F Imager
(Refer to APPENDIX 2 OPTICAL
TRANSMISSION UNIT TYPE-II)
(Refer to APPENDIX 1 SETTING,
CONNECTING, ADJUSTING THE
IMAGE I/F BOARD.)
B-12INSTALLATION CONTENTS
006-252-05
06.30.01 FM3040 FM-DP L
Service Manual
B-12
2.16.2
Checking the Operations of the Optical Transmission Unit Type-II Fan
2.17.1 Checking the Voltage of the Equipment Main Body
2.17 Checking Voltage
2.18.1 Checking the Upper Cover Interlock
2.18 Checking the Interlock
2.17.3 Checking the Voltage of the Sorter
2.18.2 Checking the Front Cover Interlock
2.16.1 Checking Fan Operations of the Equipment
2.16 Checking Fan Operations
E
D
3.1 Setting the System Date and Time
3. SYSTEM SETTINGS
3.2 Parameter Continuous Setting
3.3 Setting Input CH
(Refer to APPENDIX 2 OPTICAL TRANSMISSION UNIT TYPE-II)
(Check the DC voltage of the optical transmission unit type-II)
(check the operation of the FANJ1, FANJ3, FANG1 and FANG2.)
(Check theDC voltage by the check pin on the SCN11A board and
MTH11A board. Adjust the respective voltage by the trimmer on the power supply board.)
2.18.3 Checking the Film Tray Interlocks
FP3B0005.EPS
2.17.2 Checking the Voltage of the Optical Transmission Unit Type-II
B-13
006-252-02
10.22.99 FM2569 FM-DP L
Service Manual
B-13
INSTALLATION CONTENTS
F
E
FP3B0006.EPS
4.1 Setting the Lower Removal Unit
4.2 Setting the HDD
4.3 Setting the Sorter
4.3.1 Setting the Sorter Presence
4.3.2 Setting the Sorter Parameters
4.3.3
Example of System Configuration and Settings
5.4 Correcting the Density
5. CHECKING THE OPERATIONS OF THE EQUIPMENT
4. SETTING OPTIONS
5.4.1 Moving the Density Measuring Position
of the Optical Head (Approx. 4 min. )
5.4.2 Automatic Density Correction
5.4.3 Checking Density
5.1 Checking Film Image Unevenness, Flaws,
Recording Image Format, and Conveyance Operations
5.3 Checking Conveyance and Seratches
on Film Image of the Sorter
(Initialize optical head position of the density
measurement unit may caused move during transportation.)
(24-steps pattern [AUTO F. D. C.])
(24-steps pattern [Check Density])
5.2 Chacking the sorter interlock
B-14INSTALLATION CONTENTS
006-252-05
06.30.01 FM3040 FM-DP L
Service Manual
B-14
F
FP3B0007.EPS
CHECKING CONNECTION
6.CHECKING E-I/F CONNECTION 7.
CHECKING IMAGER CONNECTION
7.7 Checking Film Output and Images
from Connected Devices
7.5 Installing Host Control Software of
Other Manufacturers
7.4 Adjusting the Image Interface
Board
7.3 Language Display of
Remote Panel
7.2 Setting the Remote Panel Software
7.1 Starting the Remote Panel
Maintenance Mode
E-I/F
DICOM
Imager
Adjusting HAV90A board
Adjusting HAV90B board
Adjusting DVI90A board
Checking the Start-up of the Equipment
by Remote Operations
Checking Film Output and Images
from the Connected Equipment
Checking the Termination of the
Equipment by Remote Operations
G
8. CHECKING THE DICOM
NETWORK CONNECTION
7.6 Setting to Use 20 x 25 cm Size
Films in Host Control Exposures
Checking Film Output and Images
from the Connected Devices
Checking the Equipment Termination
Checking the Start-up of the Equipment
Network Setting
7.8 Checking the Termination of the
Equipment by Remote Operations
B-15
006-252-05
06.30.01 FM3040 FM-DP L
Service Manual
B-15
INSTALLATION CONTENTS
9.1 Backing Up Individual Data
9. INSTALLING THE EQUIPMENT
9.2 Checking and Deleting Error Logs Which Occur at Installation
9.3 Reinstalling and Cleaning Covers
9.2.1 Checking the Error Log
9.2.2 Deleting Error Logs
9.4.1 Installing the Equipment and Securing with Fixtures
9.4 Installing the Equipment
9.4.2 Installing the Equipment without Using Fixtures
END
FP3B0008.EPS
G
Altri manuali per FM-DP L
1
Indice
Altri manuali FujiFilm Stampante
FujiFilm
FujiFilm Revoria Press SC180 Manuale utente
FujiFilm
FujiFilm ApeosPro C810 Manuale utente
FujiFilm
FujiFilm Frontier DL600 Manuale utente
FujiFilm
FujiFilm instax mini Link Manuale utente
FujiFilm
FujiFilm Frontier-S Series Manuale utente
FujiFilm
FujiFilm instax SHARE SP-2 Manuale utente
FujiFilm
FujiFilm PICTROGRAPHY 4500 Manuale utente
FujiFilm
FujiFilm Frontier-S DX100 Manuale utente
FujiFilm
FujiFilm ASK-300 Manuale utente
FujiFilm
FujiFilm Apeos 7580 Manuale utente
FujiFilm
FujiFilm ApeosPro C810 Manuale utente
FujiFilm
FujiFilm ApeosPort C7070 Manuale utente
FujiFilm
FujiFilm Apeos 2560 Manuale utente
FujiFilm
FujiFilm Apeos 5570 Manuale utente
FujiFilm
FujiFilm ApeosPort - VII C4421 Manuale utente
FujiFilm
FujiFilm 3000 Manuale utente
FujiFilm
FujiFilm CX-550 Manuale utente
FujiFilm
FujiFilm Thermal Photo Printer Manuale utente
FujiFilm
FujiFilm instax SHARE SP-2 Manuale utente
FujiFilm
FujiFilm 16558126 Manuale utente
