Fujitsu FTP628WSL221A Manuale utente
Mobile Printer
FTP-628WSL220 Series
User's Guide
FUJITSU COMPONENT LIMITED
1
I
In
nt
tr
ro
od
du
uc
ct
ti
io
on
n
Thank you for purchasing the FTP-628WSL220 Series Mobile Printer
hereafter referred to as “this product”).
This User's Guide hereafter referred to as “this guide”) contains
precautions to use it safely and correctly.
Before using this product, please read the complete this guide.
In addition, please keep this guide handy for future reference.
If you have any suggestions or comments about this guide, please
do not hesitate to contact us.
Bluetooth® is registered trademark of Bluetooth SIG.
Apple, iPod, iPhone and iPad are are trademarks of Apple Inc, registered in
the U.S. and other countries.
Android is trademarks of Google Inc.
All other product names and service names are trademarks or registered
trademarks of their respective companies.
All Rights Reserved, Cop right FUJITSU COMPONENT LIMITED 2012
2
C
Ca
au
ut
ti
io
on
ns
s
■ Change of content
The contents of this guide and this product are subject to change without
prior notice.
■ Use in high safety applications
This product is designed, developed and manufactured for general use,
such as standard industrial, general, personal and household use. This
product is not designed, developed and manufactured for “high safet
applications”, such as an application which requires extremel high
safet , which ma have a serious effect on societ , expose individuals to
serious danger (death, personal injur , severe ph sical damage or other
loss), if extremel high safet is not assured (including, without
limitation, nuclear reaction control in a nuclear facilit , aircraft automatic
flight control, air traffic control, transport control in a mass transport
s stem, medical equipment for life support, missile launch control of a
weapons s stem), or an application which requires extremel high
reliabilit (including, without limitation, submarine rela , space
satellite).
If ou wish to use this product in an environment that requires high
safet , please consult with our sales representatives.
■ Copyright
This product and this guide are cop righted works of
FUJITSU COMPONENT LIMITED.
This product and this manual must not be reproduced, duplicated, used,
or modified, partiall or in full, without permission.
3
■ Regulatory Compliance
For Customers in USA FCC)
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions:
1) This device ma not cause harmful interference, and
2) This device must accept an interference received,
including interference that ma cause undesired operation.
This equipment has been tested and found to compl with the limits for
a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses and can radiate radio frequenc energ and if not installed and
used in accordance with the instructions, ma cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined b turning the equipment off and
on, the user is encouraged to tr to correct the interference b one of
the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, an changes or modifications not
expressl approved b the part responsible for compliance could void
the user’s authorit to operate this equipment. (Example- use onl
shielded interface cables when connecting to computer or peripheral
devices).
4
For Customers in CANADA Industry Canada)
This equipment complies with Industr Canada RSS210 rules.
Operation is subject to the following two conditions:
1) This device ma not cause harmful interference, and
2) This device must accept an interference received,
including interference that ma cause undesired operation.
For Customers in EU CE Marking)
This product is in conformance with the requirements of European
Council Directive:
R&TTE Directive 1995/5/EC
Applied standards:
EN 60950-1
EN 300 328
EN 301 489-1
EN 301 489-17
EN 50581
■ Export
This device ma contain commodities, technolog or software subject to
export laws and regulations from the US and other countries. Diversion
contrar to the countr law is prohibited.
■ Warranty
We shall not be responsible for an failure caused b wrong operation or
usage in the wrong environment.
Moreover, we cannot be responsible for the loss, the passive damages or
the claim b a third part , even if it is caused b use or failure of this
product.
In addition, this product’s range of failure will never exceed the amount
of mone paid for it.
5
S
Sa
af
fe
et
ty
y
C
Ca
au
ut
ti
io
on
ns
s
■ Explanation of Symbols
The following symbols are used in this guide. Please read and
understand the meaning of each symbol in this guide.
If this product should malfunction, immediately stop using it, and
contact your sales representative.
Danger
Indicates an imminent risk of causing severe
personal injur or death if not used properl .
This
l
evel is not described in this document.
Warning Indicates possibilit of causing severe
personal injur or death if not used properl .
Caution
Indicates that a minor or some personal injur
ma occur or that the product itself or other user’s
propert ma be damaged.
Indicates an action that must not be performed.
Detailed description is on the side of this s mbol.
Indicates danger, warning and caution.
Detailed description is on the side
of this s mbol.
Indicates an action that must be performed.
Detailed description is on the side of this s mbol.
Important Indicates important points b using this product.
6
■ General Cautions
Warning
Break-
down
- Do not use in the environment with corrosive gas or salt
wind is present.
Failure to observe this ma cause failure.
Modify
- Do not modify or disassemble.
Failure to observe this ma cause fire, explosion or
breakdown.
Fire
- Do not burn or heat.
Failure to observe this ma cause smoke, fire or breakdown.
Fire
- Do not pour water.
This equipment is not waterproof. Failure to observe this
ma cause fire, explosion or breakdown.
Fire
- Do not use or store the equipment in a hot
environment.
Failure to observe this ma cause smoke
,
fire or breakdown.
Fire
- Do not throw or drop.
Failure to observe this ma cause fire, explosion or
breakdown.
Fire
- Do not use with wet hands. Do not drip or drop liquid
such as drinking water, clips or other foreign matter.
Failure to observe this ma cause fire or electric shock.
Fire
- In the event of heat, unusual smells, smoke or
excessive noise while using the product, please stop
using it immediately. Unplug the power cable, remove
the battery.
Failure to observe this ma cause fire.
7
Caution
Injury
- Do not use while driving a vehicle or walking.
Failure to observe this ma cause traffic accidents and
injuries.
Break-
down
- Do not use the printer near the equipment that
generates large radiation noise, such as a high voltage
device and a large motor.
Failure to observe this ma cause malfunction or breakdown.
Fire
- Do not use under direct sunlight or dusty environment
that contains the oil and iron.
Failure to observe this ma cause heat, fire or failure.
Fire
- If charging is not completed within the specified time,
unplug the charger and stop charging.
The batter ma leak b overcharging.
Fire
- Do not apply force to the cable.
Failure to observe this ma cause fire or electric shock.
Break-
down
- eep the power line away from other devices which
generate noise. (Large motor etc.)
Failure to observe this ma cause malfunction or breakdown.
Failure
- Before using this product, be sure to read complete
user's guide.
It ma cause the failure b incorrect use.
8
■ Printer
Warning
Accident
- Do not use the printer in a location where radio wave
generation is prohibited.
Might cause accidentall a malfunction of the instrument.
Burn
- During or immediately after operation, do not touch the
print head, the support plate and the motor. Heat is not
immediately discharged.
Failure to observe this ma cause burn injur .
Fire
- Do not put metal objects or flammable objects into the
gaps of the case.
Failure to observe this ma cause fire or electric shock.
Burn
- Surely turn off the printer's power and confirm that the
printer head is sufficiently cooled down before cleaning.
Failure to observe this ma cause burn injur .
Caution
Injury
- Never insert fingers or metal into the paper insertion
and/or eject slots of the paper cutter.
Failure to observe this ma cause equipment failure or injur .
Injury
- Be careful not to get a hand or hair caught in moving
parts.
Failure to observe this ma cause burn injur .
Questo manuale è adatto per i seguenti modelli
2
Indice
Altri manuali Fujitsu Stampante
Fujitsu
Fujitsu FTP-633MCL400 Manuale utente
Fujitsu
Fujitsu FTP-628WSL210A Manuale utente
Fujitsu
Fujitsu FTP-631MCL101 Manuale utente
Fujitsu
Fujitsu N7100E Manuale utente
Fujitsu
Fujitsu DX2100 Manuale utente
Fujitsu
Fujitsu DotMax 24 series Manuale utente
Fujitsu
Fujitsu fi-453PR Manuale
Fujitsu
Fujitsu N7100 Manuale utente
Fujitsu
Fujitsu DL3750+/3850+ Manuale utente
Fujitsu
Fujitsu FTP-631MCL201 Manuale utente
Fujitsu
Fujitsu FTP-628WSL120 Manuale utente
Fujitsu
Fujitsu FTP-641MCL351 Manuale utente
Fujitsu
Fujitsu fi-475PR Manuale utente
Fujitsu
Fujitsu DL3700 Pro Manuale utente
Fujitsu
Fujitsu FTP-628 Series Manuale utente
Fujitsu
Fujitsu DL3800 Pro Manuale utente
Fujitsu
Fujitsu PrintPartner 10W Manuale utente
Fujitsu
Fujitsu DL-3750+ Manuale utente
Fujitsu
Fujitsu N7100 Manuale
Fujitsu
Fujitsu DL5800 Manuale utente
