Fujitsu FI-4120C Guida alla configurazione
Cleaning and Maintenance
fi-4120C Image Scanner
P3PC-E007-01EN
5
DAILY CARE
55
5DAILY CARE
This chapter describes how to clean the scanner.
5.1 Cleaning Materials and Locations and Cleaning Cycle
...................................................................................... 56
5.2 Cleaning the ADF........................................................ 58
WARNING
When cleaning the scanner, turn off the
power, and unplug the AC cable from the
outlet.
56 5.1 Cleaning Materials and Locations and Cleaning Cycle
5.1 Cleaning Materials and
Locations and Cleaning Cycle
■
■■
■Cleaning Materials
The table below shows the cleaning materials that re used on this
scanner.
For details on Cleaner F1, consult the agent where you bought your
scanner.
■
■■
■Locations That Needs To Be Cleaned
Same location in the ADF must be cleaned regularly with a soft, dry
cloth moistened with Cleaner F1.
Cleaning Materials Remarks
Cleaner F1
(or isopropyl alcohol)
1 bottle
Moisten cloth with this fluid and wipe
the scanner clean.
Soft, dry cloth
5.1 Cleaning Materials and Locations and Cleaning Cycle 57
5
DAILY CARE
■
■■
■Cleaning Cycle
The following table shows the standard cleaning cycle for each
location that needs to be cleaned.
Location Standard Cleaning Cycle
Pad ASY Clean every 1000 scanned sheets.
Pick roller
Feed roller
Plastic roller
Sheet guide
Glass
ATTENTION
The scanner must be cleaned more frequently
when the following documents are used:
•Documents of coated paper
•Documents with printed text or graphics
almost covering the entire surface
•Chemically treated documents such as
carbonless paper
•Documents containing a large amount of
calcium carbonate
•Documents with lots of pencil-written areas
58 5.2 Cleaning the ADF
5.2 Cleaning the ADF
As a rule, clean the ADF every 1,000 scanned sheets. This,
however, depends on the type of document you are scanning. For
example, the ADF sometimes must be cleaned more frequently
when toner has not sufficiently adhered to the document.
■
■■
■Cleaning the ADF
The following parts needs to be cleaned in the ADF unit:
•Pad ASY
•Pick roller
•Feed roller
•Plastic roller
•Sheet guide
•Glass
CAUTION
When the scanner is in use, the surface of the
glass inside the ADF becomes hot.
Before cleaning ADF, disconnect the AC
adapter from the power outlet, and wait at
least 15 minutes for the glass to cool down.
5.2 Cleaning the ADF 59
5
DAILY CARE
The following shows the procedure for cleaning the ADF.
1. Open the ADF by pushing on the ADF button and
turning the ADF cover to the front.
CAUTION
Be careful, the ADF cover may close and
pinch your finger.
ADF button
The front portion
60 5.2 Cleaning the ADF
2. Clean the following locations with a soft, dry
cloth moistened with Cleaner F1.
Pick roller (One pieces)
Plastic rollers (Four pieces)
Sheet guide
(A white portion,
Two parts)
Glass(Two parts)
Feed rollers (Four pieces)
Pad ASY
5.2 Cleaning the ADF 61
5
DAILY CARE
•Pad ASY
Clean the Pad ASY (rubber surface) downwards (direction of
arrow). When doing this, take care not to catch the pick
springs to avoid bending.
•Pick roller
Lightly clean the Pick rollers taking care not to scratch the
roller surfaces and the Mylar sheet. Take particular care when
cleaning these rollers, as black foreign matter on these rollers
affects document pick performance.
Pick spring
The portion to clean
Mylar sheet (Transparent)
62 5.2 Cleaning the ADF
•Feed roller
Follow the procedure below while rotating the Feed rollers to
clean the rollers.
1) Open the ADF by pushing on the ADF button and
turning the ADF cover to the front.
Open the ADF cover with the operator panel
indicating anything other than "P" or "0". The Feed
rollers do not rotate even if you open the ADF cover
with "P" or "0" displayed and perform step 2).
2) Simultaneously hold down the "Send to" and "Scan"
buttons on the operator panel.
The Feed rollers start to rotate slowly.
For details on where the "Send to" and "Scan" buttons
are located, see "1.3 Operator panel."
3) Hold a soft, dry cloth moistened with cleaning fluid
against the surface of the rotating Feed rollers so that
it lightly cleans the surface of the rollers. Take
particular care when cleaning these rollers as black
foreign matter on these rollers affects document pick
performance.
As a guideline, seven simultaneous presses of the
"Send to" and "Scan" buttons cause the Feed rollers
to rotate one full turn.
CAUTION
In step2, four Feed rollers turn at
the same time.
When cleaning the Feed roller,
be careful as your hand may
easily contacts the Feed roller.
5.2 Cleaning the ADF 63
5
DAILY CARE
•Sheet guide(Especially a white portion)
Clean lightly.
•Glass
Clean lightly.
HINT
When white portion of the sheet guide or
glass surface become dirty, black vertical
streaks sometimes appear in the scanned
image.
Altri manuali per FI-4120C
8
Questo manuale è adatto per i seguenti modelli
1
Indice
Altri manuali Fujitsu Scanner
Fujitsu
Fujitsu M4097D - Fb 50PPM SCSI A3 Dupl 100Sht Adf Manuale
Fujitsu
Fujitsu S510 - ScanSnap - Document Scanner Manuale utente
Fujitsu
Fujitsu fi-5530C - Document Scanner Manuale utente
Fujitsu
Fujitsu 6010N - fi - Document Scanner Manuale
Fujitsu
Fujitsu fi-6400 Manuale utente
Fujitsu
Fujitsu ScanSnap Manuale utente
Fujitsu
Fujitsu PA03338-B035 Manuale utente
Fujitsu
Fujitsu fi 5750C - Document Scanner Manuale
Fujitsu
Fujitsu ScanSnap iX500 Manuale utente
Fujitsu
Fujitsu fi-6800 Manuale utente
Fujitsu
Fujitsu fi-6140Z Manuale utente
Fujitsu
Fujitsu M4099D Manuale utente
Fujitsu
Fujitsu fi-6130Z Manuale
Fujitsu
Fujitsu FI-4120C Guida di riferimento
Fujitsu
Fujitsu fi-4640S Guida alla configurazione
Fujitsu
Fujitsu fi-4860C Guida di riferimento
Fujitsu
Fujitsu fi-60F Manuale utente
Fujitsu
Fujitsu FI-4120C Manuale
Fujitsu
Fujitsu FI-5900C Manuale utente
Fujitsu
Fujitsu SP-1120N Manuale
